Coupled perpendicular magnetization in Fe/Cu/Fe trilayers

Ultrathin epitaxial Fe films on Cu(1 0 0) with perpendicular magnetization have been used as templates for the preparation of FCC Fe/Cu/Fe trilayers. The magnetic anisotropy and the coupling of these films have been studied by in-situ magneto optical Kerr effect measurements and Kerr microscopy. The magnetic coupling of both Fe layers is found to be dominated by magnetostatic interaction. Adsorbate-induced spin reorientation in the top layer also causes spin reorientation in the bottom layer. The governing role of the Fe-vacuum interface for the magnetism of the whole trilayer is demonstrated.     

氧化共沉淀法制备纳米级掺锑α—Fe2O3气敏陶瓷粉料

氧化共沉淀法制备纳米级掺锑α┐Ｆｅ２Ｏ３气敏陶瓷粉料王忠春＊＊刘尔生陈耐生＊黄金陵（福州大学化学系福州３５０００２）关键词α－Ｆｅ２Ｏ３陶瓷，锑掺杂气敏材料，纳米材料１９９６－１０－０５收稿，１９９７－０４－２２修回福建省科委资助项目＊＊现在上海硅酸...     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.     

Nano-bio interface study between Fe content TiO2 nanoparticles and adenosine triphosphate biomolecules

The advent of nano-biotechnology has inspired the interface interaction study between engineered nanoparticles (NPs) and biomolecules. The interaction between Fe content titanium dioxide (TiO₂) NPs and adenosine triphosphate (ATP) biomolecules has been envisioned. The effect of Fe content in TiO₂ matrix was studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The increase in Fe content caused a decrease in particle size with change in morphology from spherical to one-dimensional rod structure. The Fe incorporation in the TiO₂ matrix reduced the transition temperature from anatase to rutile (A-R) phase along with formation of haematite phase of iron oxide at 400°C. The interaction of Fe content TiO₂ NPs with ATP molecule has been studied using spectroscopic method of Raman scattering and infrared vibration spectrum along with TEM. Fe content in TiO₂ has enhanced the interaction efficiency of the NPs with ATP biomolecules. Raman spectroscopy confirms that the NPs interact strongly with nitrogen (N₇) site in the adenine ring of ATP biomolecule. Engineering of Fe content TiO₂ NP could successfully tune the coordination between metal oxide NPs with biomolecules, which could help in designing devices for biomedical applications.     

准立方体纳米α-Fe_2O_3的制备及光催化活性研究

本文利用无表面活性剂条件,以氨水和醋酸锌为形貌调控剂,通过水热法合成了准纳米立方块结构的α-Fe2O3。并利用X射线衍射、透射电子显微镜、扫描电子显微镜对产物的形貌进行了的表征,对其形成机理进行了初步的解释。同时对其光催化降解活性进行了研究。     

用于生物检测的链霉亲和素修饰γ-Fe2O3@Au复合颗粒的制备与表征

制备了粒径为30 nm左右的γ-Fe₂O₃磁性颗粒, 利用巯基硅烷(MPTES)的偶联作用最终制备了粒径约为35.9 nm的金磁复合颗粒. 用X射线粉末衍射仪(XRD)、透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)、傅里叶变换红外光谱(FT-IR)、振动样品磁强计(VSM)等方法对所得金磁颗粒的表面形貌、大小、结构、光学和磁学性质进行了表征. 结果表明: 金成功地包覆到了γ-Fe₂O₃颗粒的表面, 所得金磁颗粒具有超顺磁性. 利用静电吸附作用, 链霉亲和素有效修饰到了γ-Fe₂O₃@Au复合磁性颗粒表面. 通过扫描仪检测其捕捉Cy3标记寡核苷酸序列后的荧光信号, 证明了链霉亲和素修饰的γ-Fe₂O₃@Au复合磁性颗粒有生物活性, 且没有荧光背景, 在生物检测领域表现出了很大的应用前景.     

γ-Fe2O3/Ag/TiO2的制备与抗菌性能

采用两步法合成了γ-Fe₂O₃/Ag/TiO₂复合光催化剂, 以大肠埃希氏菌(E. coli)为目标菌, 对数去除率为评价指标评价了催化剂的抗菌性能, 优化了催化剂的最佳制备参数. 通过X射线衍射、 扫描电子显微镜、 X射线光电子能谱和紫外-可见漫反射光谱等手段对催化剂进行了表征. 结果表明, 当Ti/Ag摩尔比为1:0.05, 煅烧时间为3 h, 煅烧温度为350 ℃时, γ-Fe₂O₃/Ag/TiO₂表现出最佳抗菌活性. 复合催化剂具有介孔结构, 比表面积为89.1 m²/g; 光吸收边界达690 nm, 有良好的可见光响应能力; 磁性较强, 在水处理应用中可有效分离和重复使用. 反应条件不受光源限制, 在有/无光照下均具有良好的抗菌活性, 且太阳光辐照下对E. coli的对数去除率可达6.28.     

一种新型纺锤状α-Fe_2O_3纳米晶的合成、表征及其表面性能(英文)

合成了一种新型的具有单晶结构的α-Fe2O3纳米晶(NFO-1).在我们的合成方法中,样品的形貌和结构在低反应浓度体系中运用无机盐和有机模板进行双重调控,同时用溶剂挥发诱导自组装(EISA)来加速反应和在不改变形貌结构的前提下获得高产率样品.所得α-Fe2O3纳米晶的形貌和结构对其表面修饰功能有明显的影响,NFO-1因其特殊的纺锤状形貌而与表面功能试剂(多巴胺)之间的化学作用有明显的增强.并且,本文所描述的合成方法同样适用于其他过渡金属氧化物纳米单晶的合成.我们预期,这种方法可为新型纳米材料的合成提供新的途径.     

Hard magnetic properties in Pr2Fe14B/α-Fe nanocomposite magnets with a combined addition of V and C

Nanostructured Pr₈Fe_86−xV_xB_6−yC_y (x=0, 1; y=0, 1) ribbons composed of Pr₂Fe₁₄B and α-Fe phases with a high coercivity are fabricated by direct melt spinning. The effects of a single addition of V and a combined addition of V and C on the structures and magnetic properties of melt-spun Pr₈Fe₈₆VB_6−xC_x (x=0 and 1) ribbons have been investigated. Compared with addition-free ribbons, 1 at% V addition is found to reduce the grain sizes of the samples and improve their magnetic properties due to a strong exchange coupling between the hard and the soft phase. A remanence ratio of 0.82, a coercive field of 6.2 kOe and a maximum energy product of 23.4 MGOe in melt-spun Pr₈Fe₈₅VB₆ ribbons are obtained at room temperature. The combined addition of V and C is found to lead to the formation of an intermediate phase of VC at grain boundaries, which appears as a pinning barrier during magnetization and results in an increase of the coercivity value to 6.9 kOe for melt-spun Pr₈Fe₈₅VB₅C ribbons.