考虑货架存放期的经济批量排产问题的求解

在化工、造纸、制药、钢铁等工业生产中，一台设备或一条生产线可以生产多种产品的情况很常见。在生产中，如何安排各类产品的生产顺序以及生产数量显得十分重要。这类问题通常称作经济批量排产问题，这类问题是生产库存中的经典问题。本文研究的经济批量排产问题考虑了产品货架存放期因素，针对以往研究的不足，本文提出用批量变动方法求解该类问题，由计算结果显示，按照这种排产方法花费的成本要低于其他两种经济批量排产问题常用的方法。     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。     

折叠萝卜螺生物学初步研究

对采自南昌近郊池塘折叠萝卜螺一种群的生物学进行了初步研究，并就其贝壳的形态和其它种群作了比较，测量了210个折叠萝卜螺的壳高（H），壳宽（W）和体重（T），三者之间的关系可分别表示为：T＝0．0009H^2.632,T=0.0047W^1.8915,W=0.6899H-0.3437,在野外，折叠萝上课累在南昌地区从2－6月都能产卵，其中3－4月达高峰期，在室内3，5，6月为产卵高峰，4月几乎不产卵，折叠萝卜卵的孵化率很高，平均孵化率为95．66％，最高达100％，最低也有89．5％，幼螺的死亡率高达50％以上。     

Influences of Thalliation on the Morphology and Critical Temperature of Tl2Ba2CaCu2O8 Thin Films

Tl2Ba2CaCu2Ox(Tl-2212) thin films were prepared by the two-step technique.A precursor film was first prepared by the pulsed laser deposition method,and then experienced the incorporation of thalliation in a one-step or two-step annealing process.The experimental results show that the two-step annealing process produces dense and smooth films,and that the one-step annealing process produces a high critical temperature film of 101K,but the transition width is wide.Precursor films with homogeneous Ba2Ca1.3Cu2.1Ox composition are essential for producing high-quality Tl-2212 films.     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.     

晶体X射线衍射的发现及其深远影响

 2002年和2003年分别是劳厄(MaxVonLaue)发现晶体X射线衍射和布喇格(W.L.Bragg)建立布喇格方程90周年。劳厄和布喇格的发现是20世纪物理学意义深远的大事。一、X射线的发现1895年11月8日德国维尔茨堡大学校长伦琴在做阴极射线实验时,发现了一种看不见的射线从管中阴极射线轰击的那个电极发射出来,经过一个多月全神贯注的实验探索,终于确认这是一种新的射线---X射线。     

piaget数学学习心理与教学理论

以研究儿童思维的发生与发展而闻名于世界的瑞上心理学家Jean Piaget,对数学学习心理与数学教学也都有丰富的研究成果.本文旨在从他的一些著作中分析研究成果以供数学教育工作者参考。一、Piaget认为,幼儿在开始认数以前,先有整体知觉,然后再有数的抽象概念,例如有些几     

一类过程摄动系统的无阻塞鲁棒性

使用参数Dioid模块网络法,把含大量摄动参数的在普通极大代数意义下非线性状态空间模型在参数Dioid意义下线性化,在此基础上研究一类过程摄动系统的无阻塞鲁棒性.给出了有限缓冲串行生产系统在没有缓冲器下无阻塞的充要条件和充分条件.     

改进形态学相关算法以识别高相似度灰度图像

从形态学角度定义了灰度联合图像相似度，提出两种基于位表示法形态学相关算法的改进算法，通过提取位表示法的图像片边缘特征或二元化位表示法的图像片功率谱，以提高位表示法形态学相关算法对高相似度灰度图像的识别能力。