国际次声监测研讨会

全面核禁试条约第三届全球次声监测工作研讨会于1997年8月25至28日在美国新墨西哥州西班牙式的古城圣菲举行．会议云集了中国、美国、法国、俄罗斯、阿根廷、澳大利亚等5大洲12个国家61位活跃在次声学科领域的研究人员、政府官员以及联合国临时技术秘书等要员，围绕着全球次声监测中的7个专题进行报告和讨论，它们依次为：欢声阵的设计和信号处理，次声阵性能和减噪设备；法国欢声监测系统，国际次声监测系统60个站网的能力模型，对流层风对长距离次声传播的影响，高空风对次声同性能的影响，渗透管的特性以及对次声监测的减噪作用，欢声减噪器；爆炸检测，声遥感技术对爆炸源能量的估计，小当量地下，地面和近地面爆炸远距离声传     

超声光栅实验及其多普勒频移的一种简单研究方法

采用光子学方法,对超声光栅衍射实验和实验中出现的多普勒频移现象进行了研究,所得结论与采用光的波动性观点的惠更斯-菲涅耳原理及傅里叶变换等常规方法相同.该方法进一步加深了对衍射的本质和光的粒子性的理解并对光子的信息传递能力有初步的认识.     

Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

利用弧形光栅尺测量大型转轴扭矩的原理研究

利用弧形光栅尺的旋转微位移测量功能,组建一组测量体系,用于测量巨型转轴的扭矩。采用四组相同的弧形光栅尺同时测量两截面的相对转角,通过多点测量实现误差均化,得出了消除转轴直径对测量影响的公式,使仪器的环境适应能力得到了极大地提高。根据不同的工作情况,提出了相应的动态测量扭矩的计算方程。实现了大型机械设备主传动的动力监测,为设备自动化、智能化奠定了基础。     

化学与化工——化学与化工学科研究进展

在气体泄漏监测工作中选择合适的示踪剂是非常重要的。近年来，围绕示踪剂的研究开展了大量的工作，为了寻求现有示踪剂的改进，开展了全氟二甲基环丁烷示踪剂在carboxen-569分子筛上的吸附行为研究，考察了温度和采样速度对示踪剂穿透体积和安全采样体积的影响，确定了大气示踪剂样品的采集工艺参数和热解吸条件，为该示踪剂的应用奠定基础。     

Residual stress profiling of an aluminum alloy by laser ultrasonics

A residual-stress profile along the thickness of an aluminum alloy sheet is determined by laser-ultrasonic technique. Surface acoustic waves are generated by a Nd:YAG pulse laser and detected by a Heterodyne interferometer on a lateral free surface of the sheet. The distribution of residual stress is determined by measuring the relative variation of the wavevelocities at different location of the sample along its thickness. This technique is validated by three different residual stress profiles obtained experimentally.     

β缓发中子探测阵列的性能优化及测试

讲述了用于β缓发中子发射测量的中子探测阵列的性能优化过程及测试结果. 对中子探测器包装用的几种反射材料、光导和光电倍增管之间用的几种耦合材料行了系统的对比和研究. 为了优化电子学和实时监测整个探测阵列的工作状态, 引入了LED光纤刻度监测系统.     

医学超声研究的一些新进展

1991年12月在美国奥兰多(Orlando)召开的IEEE1991超声年会上有许多医学超声方面的研究报告,反映了当前医学超声研究的一些发展,本文选择几个方面的内容作一介绍。 一、超声背散射显微镜 目前常用的B型超声诊断仪使用的超声频率是3—10MHz,相应的分辨率是毫米级的。近年来许多研究单位研究开发20MHz以上直到100MHz的B型成像系统,其分辨率可达到20μm。由于人体组织     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.     

The First Results of Supersonic Molecular Beam Injection in the HL-2A Tokamak

HL-2A tokamak, the first tokamak with divertor in China, has been constructed and put into operation in 2002. The main parameters are R=1.65 m, a=0.4 m, BT=2.8 T, Ip = 0. 48 MA. The divertor of HL-2A is unique, because it is characterized with a large closed divertor chamber. The device has double divertor chamber, but now it is operating with lower single null configuration to study the physics of divertor for the next step design of a divertor. Supersonic molecular beam injection （SMBI） system with LN2 cooling trap was first installed and demonstrated on the HL-2A tokamak in 2004. The first results of SMBI into HL-2A plasma are to demonstrate the function of the HL-2A divertor and to observe the cold pulse propagation during multi-pulse SMBI on HL-2A Tokamak.