高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

三元复合驱低浓度体系相行为及中间混合层结构分析

低浓度的表面活性剂ASP(碱/表面活性剂/聚合物)驱油体系溶液与模拟原油混合,研究该体系的相行为和界面张力的变化情况,并应用粒度分析仪和冷冻蚀刻透射电子显微镜技术,对中间混合层的粒径分布及其结构进行研究.发现中间混合层的体积随各组分的浓度变化而有一定的规律性,中间混合层与油相和水相之间的界面张力均能达到超低.特别是得到了冷冻蚀刻电子显微镜照片, 并提出中间混合层为胶束、微乳液、乳状液等表面活性剂聚集体的共存体系,其中微乳液结构占主要地位.这对丰富表面活性剂的理论研究及探讨三元复合驱的驱油机理必将起到重要作用.     

Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。     

PCB酸性蚀刻液中缓蚀剂对厚铜线路制作的影响

以2-巯基苯并噻唑(2-MBT)、 苯并三氮唑(BTA)和苯氧基乙醇(MSDS)作为缓蚀剂, 研究了其加入在酸性蚀刻液后对PCB厚铜线路的缓蚀效果。通过接触角测试、电化学测试和蚀刻因子得出缓蚀状态,并结合扫描电子显微镜观察铜表面形貌。通过分子动力学计算和量子化学模拟分析缓蚀剂在铜表面的吸附机理。结果表明,2-MBT + MSDS与BTA + MSDS的分子结构可有效地平行吸附在铜表面,且吸附能高于单一缓蚀剂。加入了2-MBT + MSDS的蚀刻液,对厚度约为33 μm铜线路进行刻蚀,铜线路的蚀刻因子提高到6.59,可有效应用于PCB厚铜线路制作。