我国实现蓝宝石衬底氧化锌二极管室温电致发光

据《科学时报》近日报道，由中科院长春光机所、厦门大学共同承担的国家自然科学基金委员会重点项目“氧化锌基单晶薄膜材料、物性及器件研究”，日前正式通过了国家自然科学基金委信息科学部专家组的中期检查验收。该项目在国内率先获得了氧化锌同质结的电致发光，并且在国际上首次实现了蓝宝石衬底生长的氧化锌二极管室温电致发光，为今后氧化锌蓝紫外发光和激光二极管的发展奠定了实验基础。     

蓝宝石R面上ZnO薄膜的NH3掺杂研究

以NH₃为掺杂源,利用金属有机化学气相沉积(MOCVD)系统在蓝宝石R面上生长出掺氮ZnO薄膜。通过XRD,SEM测量优化了其生长参数,在610℃和在80sccm的NH₃流量下生长出了〈1120〉单一取向的ZnO薄膜。经Hall电阻率测量,得知该薄膜呈现弱p型或高电阻率,并对其光电子能谱进行了研究。     

掺钛蓝宝石脉冲可调谐激光器在实验室中的应用

介绍了掺钛蓝宝石可调谐激光器在实验室中的应用.自行设计了波长690~900 nm之间连续可调谐激光,单脉冲能量为5 mJ,重复频率为20 Hz,激励采用波长532 nm、能量35 mJ的倍频YAG激光器,经过调谐滤波器,输出连续可调谐激光.     

Compact Single-Stage Femtosecond Multipass Ti：Sapphire Amplifier at 1 kHz with High Beam Quality

A compact femtosecond Ti：sapphire amplifier system is reported using single-stage multipass configuration with high beam quality. A high dispersion glass stretcher and a pair of double prisms for compression are introduced based on broadband femtosecond seed pulses. The non-grating-based pulse stretcher and compressor are advantageous to increase high beam quality and to reduce the high-order dispersion. A Gaussian filter is used to reduce the gain narrowing effect in amplification. The compact femtosecond Ti：sapphire nine-pass amplifier delivers pulses with a duration of 26 fs and an energy of 800μJ at 7mJ pumping pulses energy at I kHz. The 1-kHz femtosecond amplifier with high beam quality and high stability is very suitable for ultrafast physics research applications, such as attosecond science, ultra-precision micromachining, and THz wave generation.     

Supercontinuum Generation in a Photonic Crystal Fibre

Nearly 1000-nm broad continuum from 390 nm to 1370 nm is generated in a 2-m long photonic crystal fibre. The maximum total power of supercontinuum is measured to be 60mW with the pumping power of 800mW output from a 200-fs Ti:sapphire laser. The evolution of the pumping light into supercontinuum is experimentally studied in detail. It is found that the mechanism for supercontinuum generation has direct relations with Raman effect and soliton effect, and the four-wave mixing plays an important role in the last phase of the supercontinuum generation.     

掺钛蓝宝石与超短脉冲激光

详细阐述掺钛蓝宝石晶体的物理化学与光谱特性，着重介绍了以掺钛蓝宝石晶体为激光介质的各种激光器件及关键技术，对国内外超短脉冲激光的产生与放大技术的发展历史、研究动态和应用前景也作了简单评述。     

基于视觉辐条图案识别方法的蓝宝石引晶机制研究

工业生产蓝宝石晶体过程中,引晶步骤有着至关重要的地位。引晶必须在温度梯度较小,温度分布趋于稳定的条件下进行。目前,工业生产蓝宝石主要依靠人工经验操控籽晶杆实现引晶操作,但是人工引晶操作的准确性不高会导致成品品质不佳、资源浪费。为此,本文提出一种基于蓝宝石视觉辐条图案识别方法来检测蓝宝石熔体状态自由液面状态,从而实现一种高效率引晶的机制。此方法利用经典骨架化算法细化辐条图案,Harris算子实现特征信息的提取,提取的特征信息放入运动轨迹模型中判断熔体稳定性,分析液面温度分布稳定性从而实现引晶。结果表明,此算法具有有效性,蓝宝石晶体引晶效率大大提高,生产出的成品良率也有提升,可有效指导蓝宝石的工业生产。     

半球蓝宝石整流罩制造技术研究

整流罩在高速飞行中既要对空气进行整流,同时又起光学窗口的作用。蓝宝石材料硬度高,加工非常困难。分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。     

SiO2图形化蓝宝石衬底对GaN生长及LED发光性能的影响

为了提高氮化镓(GaN)基发光二极管(LEDs)的发光性能,采用等离子体增强化学气相沉积(PECVD)在蓝宝石衬底上沉积SiO2薄膜,经过光刻和干法刻蚀技术制备了SiO2图形化蓝宝石衬底(SiO2 patterned sap-phire substrate,SPSS),利用LED器件的外延生长和微纳加工技术获得了基于S...     

Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

In this paper,large-sized sapphire (230×210 mm,27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching,scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101～8.0×102 cm-2,in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally,the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.