世界上第一个物理技术研究所的建立及其影响

德国夏洛滕堡物理技术研究所（The Physikallisch-Technische Reichanstalt,简称PTR）是世界上第一个国家级的物理技术研究所，它开创了科学研究和技术研究相结合，服务于工业和国家经济之先河。文章从PTR建立的历史背景、早期研究工作和所产生的影响等方面作较为全面的讨论。     

Studies on Electrochemical Property of LiFePO4/C as Cathode Material for Lithium Ion Batteries

IntroductionLithium ion batteries are key components of mobiletelephones and portable computers.Among the knownLi-intercalation materials for lithium ion battery cath-odes,LiCoO2,LiNiO2,and LiMn2O4have been stud-ied extensively[1—3].LiCoO2is nowused in c…     

四氮大环-金属配合物与DNA作用的电化学及谱学研究

Mononuclear copper（Ⅱ）, nickel（Ⅱ） and cobalt（Ⅲ） tetracoordinate macrocyclic complexes were synthesized and spectroscopically characterized. The crystal structure of the three compounds were determined by X-ray crystallography. The electrochemical experimental results indicate that the three complexes could interact with DNA mainly by electrostatic interaction. The interaction of tetracoordinate macrocyclic cobalt（Ⅲ） complex with DNA was studied by cyclic voltammetry and UV-vis spectroscopy. The experimental results reveal that tetracoordinate macrocyc- lic cobalt（Ⅲ） complex could interact with DNA by electrostatic interaction to form a 1 ： 1 DNA association complex with a binding constant of 7.50 ×10^3 L·mol^-1.     

Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.     

基于659总线的飞行器电气控制系统设计与实现

为提高飞行器电气控制系统测量和管理的可靠性,实现电气控制系统的综合管理;通过采用ARINC659背板总线、冗余的电气控制系统模块化设计方法,设计并实现了一种电气控制系统。这篇文章介绍了该系统的主要功能、技术特点、硬件和软件设计。该系统在满足实时性、可靠性需求的同时,具有快速的系统重构和很强的可配置性,而且大大减少了飞机电气系统的重量,适应电气控制系统综合控制发展的方向。基于659总线的飞行器电气控制系统,解决了复杂机电系统的数据融合和综合管理,在工程实践中已成功应用。     

气相色谱-质谱法测定电子电气产品中多溴二苯醚及多溴联苯

建立了利用气相色谱-质谱测定电子、电气产品中多溴二苯醚及多溴苯的方法。对样品的粉碎、提取方法、色谱柱的选择、测定条件进行研究,并自建标准质谱图库;采用保留时间、Br同位素规则、质谱特征离子、谱库检索等4种方式相结合进行定性,避免了假阳性及漏检的情况,结果更加准确可靠。本法检出限为5mg/kg,PBDEs的回收率为91.3%,PBBs的回收率为92.5%,相对标准偏差(RSD)为4.3%。与现有方法相比,本法分离时间最短(6min),具有简便快速、实用性强、灵敏度高、准确可靠等特点,适用于电子电气产品、塑料、橡胶、汽车内饰材料等的溴系阻燃剂分析,满足欧盟RoHS指令检测的要求。     

紫外光引发环氧树脂的下行前线聚合行为

采用紫外光(UV)引发法研究了221型脂环族环氧树脂的下行前线聚合行为.探讨了光引发剂、热引发剂用量和预热温度等对聚合前线的推动速率Vf和前线引发时间ti的影响,并利用傅里叶变换红外光谱(FTIR)、热重(TG)和差示扫描量热(DSC)等对固化物结构和热性能进行了表征.研究结果表明,提高光引发剂浓度、热引发剂浓度或预热温度,均可提高聚合前线的推动速率Vf,缩短引发时间ti.采用该技术制备的环氧树脂固化物具有较好的均一性及热稳定性.     

恒电流库仑滴定中电气因素的影响

分析恒电流库仑滴定过程中电气因素的影响,包括恒流源输出精度的影响、参考标准不确定度的影响、外部连接线路的影响、实验环境对电路的影响等,提出了减小这些影响的办法。     

微波萃取/GC-MS法对电子电气产品中多氯萘的测定

建立了微波萃取/GC-MS法检测电子电气产品中多氯萘的方法。将破碎后的样品以甲苯为溶剂进行微波萃取,萃取液经硅胶小柱净化、平行蒸发定量浓缩后采用气相色谱-质谱法测定多氯萘的含量,外标法定量。优化了样品前处理条件,包括前处理方式、微波萃取溶剂、萃取时间,以及净化小柱的选择。对于8种含不同氯原子数的多氯萘,在1~50 mg/L范围内,线性关系良好,相关系数均大于0.995;方法定量下限为0.2~1.0 mg/kg,相对标准偏差为2.7%~7.2%,回收率为77%~112%。该法操作简便、分析迅速、结果准确,可以满足对电子电气产品中多氯萘的定性确证和定量分析。     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.