理想的胰岛素晶体

在自然界或实验室内 ,“理想化”总是一个难以实现的概念 .但最近美国休斯顿大学的P .Vekilov教授及其同事们发现 ,他们常常可以将胰岛素晶体生长成理想的晶体形式 .他们让胰岛素蛋白质在一个已有的胰岛素晶体的螺旋位错缺陷处进行生长 ,蛋白质将绕着这个缺陷发生晶化并形成一个理想晶状胰岛素 .这是因为螺旋位错常常使晶层间产生一个微小的角度偏差 .对于大多数的晶体来说 ,晶层间的相互作用能促进晶体生长时界面间的配置 ,并导致晶层阶跃发生束缚和形成一个有条纹的晶体 .除此之外 ,在溶液中输入被溶解物质也能引起晶层阶跃的约束 .胰岛…     

种晶法控制金刚石成核的合成工艺研究

本文采用了半金刚石昌规则地排列放置在溶媒表面上的工艺方法进行了控制金刚石成核的合成实验。通过使用不同的种晶放置位置及种晶排列问题，研究了金刚石在种晶上的生长过程和影响合成结果的因素。     

Growth of NaBi（WO4）2 Dendrite and Mechanism

The solid-liquid interface motion of NaBi（WO4）2 （NBWO） melt crystal growth is observed in an in situ system, in which the whole processes of interface transition from fiat interface and cellular to dendrite are visualized. The spacing of the dendrite under smaller temperature gradient turns out to be larger than that under larger temperature gradient, which is found to be sensitive to the temperature distribution. The mechanism of dendrite growth of NBWO is studied based on the model of the growth units of anion coordination polyhedra. The { 001} face has two apex links, so it shows higher stability and has high growth rate and forms the arm of dendrite, whereas the {010} face has only one apex link, and thus shows relative slower growth rate and firstly forms the branches.     

Ag纳米颗粒的光吸收和透射电镜研究

用硼氢化钠作还原剂,制备出两种相对稳定的含银纳米颗粒的水溶胶,用透射电镜（TEM）和光学吸收谱对这些颗粒进行了表征.当被还原的银离子较少时,所形成的银纳米颗粒较小,吸收峰呈现二极等离子体共振吸收峰.当被还原的银离子较多时,银纳米颗粒尺寸变大,并出现二极和四极共振吸收峰.在Ag纳米颗粒形成后,对其溶液稀释,发现其峰形保持不变,而峰位会出现红移,最大红移量可达到10 nm.透射电镜研究表明,低浓度溶胶中的Ag纳米颗粒尺寸较为均匀,平均直径12 nm.高浓度溶胶中的纳米颗粒尺寸呈双尺寸分布特点,少量颗粒直径小于14 nm,大部分颗粒直径大于20 nm.     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.