玻璃陶瓷材料中Tm3+离子红外到蓝色上转换发光

系统研究了PbF2+GeO2+WO3ⅩⅣTmF3玻璃陶瓷材料中,在近红外光(1.06μm)激发下,Tm3+离子的发光特性.实验中观测到Tm3+离子的两组峰值位置分别在20920cm-1和22173cm-1的蓝色上转换发光,并证实这两组上转换发光分别与吸收三个和四个光子有关,同时建立了上转换发光的模型.为了选择最佳掺杂浓度,详细地测量了Tm3+离子峰值为20920cm-1的蓝色上转换发光强度与TmF3浓度的关系.     

非晶调制多层膜Nb/Si中的互扩散研究

利用原位Ｘ射线衍射技术得到非晶调制多层膜Ｎｂ／Ｓｉ中的互扩散系数与退火温度的关系，调制周期Ｌ＝３.２ｎｍ的非晶调制多层膜是用粒子溅射方法制备的．温度范围为４２３—５２３Ｋ的有效互扩散系数通过原位测量多层膜的一级调制峰强度与退火温度之间的关系而得到．利用缺陷陷阱延迟扩散机制解释了所得到的扩散系数与退火温度的关系．建立了可以解释较小前置系数的模型 关键词：     

用有限元法计算光学玻璃退火温度的分布

本文首次把求解温度场的有限元法用于计算玻璃退火时的温度分布,提出了在微机上计算第一类光学不均匀性的方案,并解决了计算问题。     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

大口径高光学均匀性磁旋光玻璃研制成功

由中国科学院西安光机所承担研制的“大口径高光学均匀性磁旋光玻璃研制”项目日前通过专家鉴定．专家表示，该成果填补了国内空白，主要技术指标达到国际先进水平．同时建议进一步加强该项目的应用推广，力争研制更大尺寸的磁旋光玻璃，以满足我国科研工作和国家经济建设事业的需要．     

Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce3+对Er3+上转换发光强度以及Er3+在1.5 μm附近波段发光性能参数的影响,并从能量匹配及能级结构角度出发对Er3+/Ce3+间的能量转移机制进行了分析.分析认为,4 I11/2能级的Er3+通过无辐射能量转移把能量传递给2F5/2能级的Ce3+激发其跃迁至2F7/2能级,而4I11/2能级上的Er3+则无辐射弛豫至4I13/2能级,从而有效降低氟磷酸盐玻璃中Er3+的上转换发光.当Er3+浓度为1.11×1020 cm-3时,Ce3+的最佳掺杂浓度为2.22×1020 cm-3,此时Ce3+的引入不仅可以降低上转换发光,而且有助于提高Er3+在1.5 μm附近波段的荧光强度、发射截面以及4I13/2能级荧光寿命.     

光纤光栅激光器激射波长的研究

一般认为，用光纤光栅作选频元件的光纤激光器，激射波长与光纤光栅中心反射波长一致，本文报道了不同的实验研究结果。通过细致的实验研究，发现光纤光栅激光器激射波长相对于光纤光栅中心反射波长有一定的偏移。激射波长可以出现在光栅中心反射波长的长波端，也可以出现在其短波端。对不同腔结构的掺镱、掺铒光纤光栅激光器的深入研究证明，谐振腔的各向异性对激光器的激射波长偏移起到决定性的作用，波长最大偏移量主要受限于光纤光栅的反射带宽。通过激光腔内的偏振控制器改变谐振腔的各向异性，可以在光纤光栅的反射带宽内控制激射波长的位置。     

Origin of the 420 nm Absorption Band and Effect of Doping Fluorine in PbWO4 Crystals

The electronic structures for three types of PbW04 (PWO) crystals, the perfect PWO, the PWO containing lead vacancy (PWO-Vpb) and fluorine doped PWO crystal (F^-：PWO), are systematically studied within the framework of density functional theory. The computational results show that the Pb 6s state situates below the valence band so that Pb^2 ions are unable to trap holes forming Pb^3 or Pb^4 to compensate for VPb^2-. The hole-trappers in PWO-Vpb are O^2- ions. Two of the longer-bond O^2- ions share a hole forming O2^3-, and four of the longer-bond oxygen ions trap two holes forming an associated color centre [O2^3--Vpb-O2^3-], which may be the origin of the 42Onto absorption band. It is also concluded that the doping of F^- would reduce the band gap and F^- ions substituting for O^2- can effectively restrict the formation of [O2^3--Vpb-O2^3-] and weaken the 42Onm absorption band and hence enhance the scintillation property of PWO.     

Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.