Advances in micro-perforated panel absorbers

Theoretical and experimental investigations on the performance of micro-perforated -panel absorbers are reviewed in this paper. By reviewing recent research work, this paper reveals a relationship between the maximum absorption coefficient and the limit of the absorption frequency bandwidth. It has been demonstrated that the absorption frequency bandwidth can be extended up to 3 or 4 octaves as the diameters of the micro-holes decrease. This has become possible with the development of the technologies for manufacturing micro-perforated panels, such as laser drilling, powder metallurgy, welded meshing and electro-etching to form micrometer order holes. In this paper, absorption characteristics of such absorbers in random fields and in high sound intensity are discussed both theoretically and experimentally. A new absorbing structure based on micro-perforated-panel absorbers demonstrate experimentally high sound absorption capability. This review shows that the micro-perforated-panel absorber has potentials to be one of ideal absorbing materials in the 21st century.     

ZnS∶Zn,Pb蓝粉在低压阴极射线激发下的应用

通过对ZnS∶Zn,Pb蓝色荧光粉进行表面包覆SiO2以改善其稳定性;In2O3材料的适量混合,提高了荧光粉的导电性,降低了它的起辉电压。采用沉淀法制备荧光屏,考察了阳极电压和阳极电流对亮度以及衰减过程的影响,实验结果表明ZnS∶Zn,Pb的性能优于ZnS∶Ag,Cl和ZnS∶Zn,可适用于FED等低压显示器。     

贝克曼AllegraTM21R型超高速离心机故障排除一例

贝克曼Allegra^TM 21R型超高速离心机开机后，操作面板上出现错误代码“28”，离心机不旋转。离心机的电机采用无刷感应驱动，由电机驱动电源模块BSMl0GD60DN2驱动离心机的电机。故障是由于电源模块BSMl0GD60DN2损坏引起的。采用东芝三相桥式IGBT电源模块MG25Q6ES42代替BSMl0GD60DN2，并更换已烧毁的栅极电阻后。开机试验，仪器恢复正常。     

Theoretical analysis of the acoustical characteristics of suspended micro-perforated panel absorbers

Sound absorption characteristics of suspended micro-perforated panel absorbers were investigated theoretically. The method of half thickness model of such panel absorber with quadripole analysis was used for predicting its acoustic performance. The analysis results show that the predictions agree well with the measurements of absorption in the reverberation chamber. The factors affecting the absorption characteristics for such absorbers were discussed, and some rules as design guidelines were given.     

Preparation and Selectivity of Molecularly Imprinted Polymer Coating on the Micro Pore Membrane of Polytetrafluoroethylene

In order to obtain mechanically stable membrane for practical application, the imprinted polymer was synthesized in the pores of polyfluoromembrane, the binding and transport ability of the membrane were studied.     

二次阳极氧化方法制备有序多孔氧化铝膜

通过二次阳极氧化方法制备多孔氧化铝膜与一次阳极氧化方法制备多孔氧化铝膜孔排布规律性的对比 ,结果发现 ,二次阳极氧化方法制取的多孔氧化铝膜孔排布规律性明显好于一次阳极氧化法制取的多孔膜 .在几个微米范围内 ,孔呈理想的六角排布 .去除一次阳极氧化膜后 ,二次阳极氧化得以在更良好的表面进行 ,制取的氧化铝膜孔规律性和有序度更高 .有序区域的尺寸与晶粒内的亚晶大小有一定关系     

介质靶表面的充电效应对等离子体浸没离子注入过程中鞘层特性的影响

针对等离子体浸没离子注入技术在绝缘体表面制备硅薄膜工艺，采用一维脉冲鞘层模型描述介质靶表面的充电效应对鞘层厚度、注入剂量及靶表面电位等物理量的影响.数值模拟结果表明：随着等离子体密度的增高，表面的充电效应将导致鞘层厚度变薄、表面电位下降以及注入剂量增加，而介质的厚度对鞘层特性的影响则相对较小. 关键词： 等离子体浸没离子注入 脉冲鞘层 绝缘介质 充电效应     

Nanoporous Structure in Low-Dielectric Films with Positronium Annihilation Lifetime Spectroscopy

We investigate nano-porous structures in thin low-dielectric films, i.e. the pore sizes, distributions, and interconnectivity, by using depth profiled positronium annihilation lifetime spectroscopy (PALS). It is found that PALS has good sensitivity to probe both interconnected and closed pores in the range from 0.3nm to 3Onto, even in the film buried beneath a diffusion barrier. A series of low dielectric constant films of organosilicon-silsequioxane with different weight percentages of porogen have been comparatively investigated. The PALS technique can be used to distinguish the open porosity from the closed one, to determine the pore size, and to detect the percolation threshold with the increasing porosity that represents the transition from closed pores to interconnected pores.Furthermore, the pore percolation length can be derived.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。