Nuclear Shadowing Effect on the K Factor in Au—Au Collisions

We investigate the nuclear shadowing effect on the K factor in the Drell-Yan process by introducing a Shadowing factor into the corresponding quantum chromodynamical αs order corrections.K factors for Au-Au collisions are calculated at the centre-of-mass system energies √s=60,130 and 200 GeV while the nuclear shadowing factor is taken into account.The numerical results indicate that the nuclear shadowing factor obviously raises the K value in the small x region,and for the same nucleon the K valus becomes smaller as the energy increases.The nuclear shadowing effect could be one reason for creating the non-constancy of the K factor.     

一个电磁感应佯谬及其理论分析

提出一个令人困惑的电磁感应问题，并运用电磁学理论对其进行了详尽的理论分析。     

Activation and Afterheat Calculation Analysis for TBM

Safety considerations of TBM are part of the design process to ensure that the TBM do not adversely affect the safety of ITER. So accurate calculations of all radioactivity and potential harmfulness are very important for designing of device, selecting of blanket and shield material, analyzing of the safety and environment, disposing of nuclear waste and operation of the reactor.     

谈谈电磁污染

由于无线电广播、电视、通讯、及微波技术的迅猛普及,射频设备的功率成倍提高,地面上的电磁辐射已大幅度增加,电磁波已成为一种新型污染.1 电磁污染的特点 电磁污染是继水质污染、大气污染、噪声污染之后的第四大污染,前三种污染可看、可闻、可听,而电磁波的污染则是看不见、摸不着、闻不到,却又是无处不在的污染.     

背景光光伏效应对屏蔽-光伏空间孤子的影响

在光伏晶体两端外加一恒定的直流偏压，背景光的光伏效应对形成屏蔽-光伏孤子的空间电荷场没有影响，但对晶体中的电流有影响.如果外电源的电动势是恒定的，则背景光的光伏效应与外电路的电阻协同起作用，可以通过晶体两端的电压降影响晶体中的空间电荷场，进而影响空间孤子的宽度.在一定的条件下甚至可以实现亮、暗孤子的转换. 关键词： 屏蔽-光伏 空间孤子 孤子宽度 亮暗孤子转换     

用辉光放电发射光谱对镀锌铁板钝化防护层的逐层分析

本文应用辉光放电发射光谱分析技术，以纯金属作标样，对几种用不同工艺处理的镀锌铁板钝化防护层进行逐层定量分析。得到了镀锌板中锌、铁的含量随浓度变化的曲线，取得了满意的分析结果，为铁板镀锌钝化防护层的工艺研究提供了可靠的依据。     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

色屏蔽效应与重子谱

利用从格点规范理论计算得出的,包括色屏蔽效应的禁闭位势;研究了重子结构,计算了重子谱及相应状态下的夸克分布的均方根半径.     

雷电的形成威力及预防

雷电灾害严重危及生命和财产的安全。因此，了解雷电成因，既有助于认识雷电的危害性，又可加强人类对雷电的防护。     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.