相匹配契伦可夫辐射式倍频

用波导产生倍频波时,如果倍频波进入辐射模区,仍然有相匹配问题。契伦可夫辐射式倍频不是自动地实现相匹配的。相匹配要求导波基波模式场,倍频传输场(自由波),倍频触发场,以及经多次反射透射后的辐射场的迭加形成的总辐射场处于同步的相匹配状态。根据这个相匹配的分析,提出波导契伦可夫相匹配的特有的方法,那就是对波导的模色散进行设计,并指出非对称波导的特有优点,是改变一个边界上的反射相变,即选择不同色散的线性材料作包层,由此可得到相匹配的高效契伦可夫倍频辐射。     

国际次声监测研讨会

全面核禁试条约第三届全球次声监测工作研讨会于1997年8月25至28日在美国新墨西哥州西班牙式的古城圣菲举行．会议云集了中国、美国、法国、俄罗斯、阿根廷、澳大利亚等5大洲12个国家61位活跃在次声学科领域的研究人员、政府官员以及联合国临时技术秘书等要员，围绕着全球次声监测中的7个专题进行报告和讨论，它们依次为：欢声阵的设计和信号处理，次声阵性能和减噪设备；法国欢声监测系统，国际次声监测系统60个站网的能力模型，对流层风对长距离次声传播的影响，高空风对次声同性能的影响，渗透管的特性以及对次声监测的减噪作用，欢声减噪器；爆炸检测，声遥感技术对爆炸源能量的估计，小当量地下，地面和近地面爆炸远距离声传     

A New Type of Terahertz Waveguides

A new type of THz waveguides, which employs a solid polyethylene rod as the core and polyethylene tubes in a periodic array of square lattice as the cladding, is proposed. Optical properties of this new THz waveguide, especially in dispersion, confinement loss and single mode property, are investigated in detail with the plane wave expansion method and the beam propagation method. Numerical results demonstrate that the new THz waveguide can reach not only low dispersion but also low confinement loss at single mode propagation. Therefore, the square lattice structure is a better candidate as THz waveguides than the triangular ones.     

粒子与光电材料相互作用的应用基础研究获自然科学奖

据《济南日报》消息，在2006年1月10日召开的全国科技大会上，山东大学物理与微电子学院王克明教授完成的项目“粒子与光电材料相互作用的应用基础研究”获国家自然科学奖二等奖。该项目在离子注入光波导研究领域取得一些原创性成果，对进行跨学科新领域的课题研究具有重要的借     

Multi-path propagation of acoustical wave and time reversal field in a solid plate

The multi-path effect of the acoustical wave in a solid plate is studied. The multireflection and wave conversion of the cylindrical compressional and shear waves, which are excited by an infinite strip on a free surface of the solid plate, are analyzed thoroughly by the far-field approximation method. The concise analytical representations of the cylindrical waves are obtained. The time reversal processing is then applied to the propagation of the cylindrical waves and analyzed theoretically and experimentally. It is shown that the waves coming from different array elements and different paths all arrive at the original place after the time reversal operation. It indicates that the time reversal can compensate automatically the wave aberration caused by the multi-path effect. The self-adaptive focusing of the time reversal field is also analyzed quantificationally by the focusing gain and the ratio of the principal to the second lobe. The effects of the focus position and the aperture of the transducer array on the focused field are also investigated. It shows that theoretical and experimental results are consistent to each other very well.     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.     

开口波导有效接收面积的测量

高功率微波功率测量的基本思想是将高功率降为低功率来进行测试，空间辐射场测量方法是基于该思想的功率测量方法之一。空间辐射场测量方法是通过测量接收天线接收的辐射场功率来测量微波源的功率，该方法需要已知接收天线在特定频率下的有效接收面积，以便计算出辐射源的功率。对于标准接收天线的有效面积，可以采用近似值来代替接收天线的有效面积，但是测量结果误差较大，因此，为了准确测量辐射源的功率，     

大口径光束波前采样器(孔栅)的研制

应用平面波角谱理论，分析了采样器对光波场采样和分光的基本原理以及对空间采样频率的选择规则，描述了实际研制的大口径采样器的结构设计，并通过数值方法和高能激光大气传输实验研究了高能激光经采样器前／后的远场光斑分布关系。结果表明：利用光束波前采样器能高保真地实现对高能激光束的分光。     

A Continuation Method of Parameter Inversion for Non-Equilibrium Convection-Dispersion Equation

Based on the homotopy mapping, a globally convergent method of parameter inversion for non-equilibrium convection-dispersion equations （CDEs） is developed. Moreover, in order to further improve the computational efficiency of the algorithm, a properly smooth function, which is derived from the sigmoid function, is employed to update the homotopy parameter during iteration. Numerical results show the feature of global convergence and high performance of this method. In addition, even the measurement quantities are heavily contaminated by noises, and a good solution can be found.