爆磁压缩发生器通过脉冲变压器对脉冲形成线充电的理论分析

 将爆磁压缩等效为电流源的方法，对爆磁压缩发生器通过脉冲变压器对脉冲形成线充电进行了理论分析，得出爆磁压缩发生器在负载上产生电流波形（简称负载电流）为直线情况和任意电流波形情况下充电电流和充电电压的表达式。分析表明变压器耦合互感与负载电流随时间变化增长率是脉冲形成线充电的两个重要参数，脉冲形成线第一个充电电压峰值与变压器的耦合互感和负载电流波形斜率成正比，负载电流波形斜率的变化可以改变充电电压峰值的时间，斜率不断增加可以延长第一个充电电压峰值时间，从而可能增加充电电压的幅值，提高爆磁压缩发生器能量的利用效率。     

Tesla变压器型电子束加速器初步实验

 介绍了一种Tesla变压器型的强流电子束加速器。当变压器初级输入20kV左右的电压时，加速器二极管输出电压500kV，电流9kA，信号脉宽大约50ns，该装置具有结构简单，安装方便，运行可靠等特点。     

二次升压的重复频率脉冲电源

介绍一种采用脉冲变压器二次升压工作方式实现高电压脉冲输出的设计电路，电路的主要特点是可以对电容负载实现快速充电，通常其充电时间可控制在几百纳秒内。由于在电路中的开关器件为氢闸流管和磁压缩装置，因此系统具有千赫兹的连续重复频率工作能力。目前，以这种方式工作的重复频率脉冲电源系统，脉冲调制过程的能量传输效率大于70％，输出脉冲电压大于600kV，连续重复频率大于100Hz.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

Ohmic Radio-Frequency Synergy Current Drive and Transformer Recharging Experiments in the HT-7 Tokamak

Lower hybrid current drive (LHCD) experiments for investigating the interaction between lower hybrid (LH) wave and residual dc electric field were performed in extensive plasma parameter ranges in the HT-7 superconducting tokamak. The experimental results are well fitted to the Karney-Fisch theory on the efficiency of LH waves energy converted to poloidal magnetic field energy. The fraction of absorbed LH power is about 0.75 for the HT-7 machine, and the upshift of the LH-wave parallel refraction index during LHCD experiments have been derived by the optimizing fitting parameters. The LH wave is also used for the transformer recharging when the plasma current is maintained unchanged. The highest efficiency about 7% has been achieved in HT-7 machine.     

Decomposition of Transformer Oil Under Ultrasonic Irradiation During Degassing Process

In the degassing process of transformer oil with ultrasonic waves ,decompostition of the oil was observed.Light hydrocarbons,including methane,ethane,ethylene ,aceylene,propane etc,were found to be released continuously from the oil into headspace within a closed vial placed in an ultrasonic field ,The gases came from decomposition of hydrocarbon molecules under cavitation effect.     

用气相色谱仪测定变压器油中气体

本文采用多柱自动切换气相色谱仪和真空全脱气装置对变压器和互感器用油中的气体进行了系统的分析，除可测定油中的氢、甲烷、乙炔、乙烯、乙烷、二氧化碳和一氧化碳等气体外，还可根据不同需要测定氮、氧以及Ｃ３和Ｃ４烃的含量。本方法已用于诊断变压器和互感器内部变化及故障。     

分光光度法测定微量炔烃的研究

叙述了利用生成炔亚铜的反应来定量测定微量炔烃的分光光度法。研究表明，在严格控制氨的浓度、保持足量的还原剂的条件下，可以有效地消除反应介质、反应时间、反应物的浓度、空气中的氧等对测定的影响，获得满意的定量结果。该方法已在实际生产中得到应用。     

基于AD7656的旋变角度测量设计

Describes the functions, background applications and features of the resolver, in order to calculate the angle position of the resolver signals, this paper choose AD7656 precision chip, proposed the resolver algorithm for calculating resolver angle by measuring the output voltage and excitation voltage of the resolver. Mainly introduce AD7656 and its hardware circuit design, and flowchart of the algorithm for arctangent. This algorithm is simple and reliable. Experimental results show that the system design is reasonable, measurement algorithms of resolver angle meets the requirements. Analyze the error for this result and prepare for the study.