高浓铀金属临界装置缓发中子有效份额测量

缓发中子有效份额βeff是反应堆动态特性的重要参数,也是相对反应性与绝对反应性之间的转换桥梁,对于以反应性作为宏观参数的检验工作具有重要意义。测量采用基于Rossi-α方法的Nelson数法开展了快临界装置βeff的实验研究。通过采用铅屏蔽、更薄的6Li玻璃闪烁体、脉冲幅度甄别三种措施,降低了γ射线对测量的影响。实验中测量了反应堆从-60￠到缓发临界之间的7个状态,最终测量得到βeff值为0.006 66,不确定度为7.88%;与理论计算数值偏差为2.15%。测量结果与理论值符合良好,表明了测量方法的有效性。     

基于深度学习的ELM实时识别研究

基于深度学习的方法，在HL-2A装置上开发出了一套边缘局域模(ELM)实时识别算法。算法使用5200次放电数据(约24.19万数据切片)进行学习，得到一个深度为22层的卷积神经网络。为衡量算法的识别能力，识别了HL-2A装置自2009年实现稳定ELMy H模放电以来所有历史数据(约26000次放电数据)，共识别出1665次H模放电，其中误识别35次，误报率为2.10%。在实际的1634次H模放电中，漏识别4次，漏识别率为0.24%。该误报率和漏报率可以满足ELM实时识别的精度要求。识别算法在实时控制环境下，对单个时间点的平均计算时间为0.46ms，可以满足实时控制的计算速度要求。     

Second-order random wave solutions for interfacial internal waves in N-layer density-stratified fluid

This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.     

Scanning tunnelling microscope studies of growth of RuO2（110） thin layer on Ru（0001）

This paper reports that the growth of RuO_x(110) thin layer growth on Ru(0001) has been investigated by means of scanning tunnelling microscope (STM). The STM images showed a domain structure with three rotational domains of RuO_x(110) rotated by an angle of 120℃. The as-grown RuO_x(110) thin layer is expanded from the bulk-truncated RuO_x(110) due to the large mismatch between RuO_x(110) and the Ru(0001) substrate. The results also indicate that growth of RuO_x(110) thin layer on the Ru(0001) substrate by oxidation tends first to formation of the Ru-O (oxygen) chains in the [001] direction of RuO_x(110).     

Recent Experimental Results of HL-1M Tokamak and Progress of HL-2A Project

Recent experimental results of HL-1M tokamak and progress of HL-2A project are presented. Strong fishbone instability was observed during off-axis ECRH. This is first observation of the fishbone instability purely driven by energetic electrons produced by ECRH. The MBI was first proposed and demonstrated on HL-1M. Recently new results of MBI experiment were obtained by increasing the pressure of gas. A stair-shape density increment was obtained with high-pressure multi-pulse MBI just like the density evolution behavior during the multipellet injection. It is shown     

ZnAl2O4/α-Al2O3复合衬底的制备和GaN薄膜的生长

利用脉冲激光淀积法(PLD)在α-Al₂O₃衬底上淀积了ZnO薄膜, 通过ZnO和α-Al₂O₃固相反应制备了具有ZnAl₂O₄覆盖层的α-Al₂O₃衬底. X射线衍射谱(XRD)表明ZnAl₂O₄薄膜随反应时间由单一(111)取向转变为多晶取向, 然后变为不完全的(111)择优取向. 同时扫描电子显微镜(SEM)照片表明ZnAl₂O₄表面形貌随反应时间由均匀的岛状结构先变为棒状结构, 然后再变为突起的线状结构. 另外, XRD谱显示低温制备的ZnAl₂O₄在高温下不稳定. 在ZnAl₂O₄覆盖的α-Al₂O₃衬底上利用光加热低压MOCVD法直接生长了GaN薄膜. XRD测量表明随ZnAl₂O₄厚度增加GaN由c轴单晶变为多晶, 单晶GaN的摇摆曲线半高宽为0.4°. 结果表明薄ZnAl₂O₄覆盖层的岛状结构有利于GaN生长初期的成核, 从而提高了GaN的晶体质量.     

基于同步辐射加速器的康普顿背散射γ射线源(Ⅰ)产生MeV量级γ光子的数值计算

提出在筹建的上海同步辐射装置上建造一条MeV量级γ射线束及应用站,采用μm波长的红外(或远红外)激光与储存环中3.5GeV电子束进行康普顿背散射,从而获得能区为1—25MeV的康普顿背散射γ光子束,该光子束具有高强度、高极化度(线和圆极化)、准单色、方向性好的优点,可以广泛地应用于核物理和核天体物理基础研究及相关的应用研究领域.介绍了康普顿背散射的基本原理,并结合储存环参数给出了光子束性能的数值计算结果.     

基因芯片荧光图象采集与分析

描述了基因芯片荧光图象的光学共聚焦成象,大范围高速扫描与控制,数据采集的原理和方法.并讨论了基因芯片荧光图象的分析算法,即模板定位与阈值分割相结合的半自动算法,并将其计算结果与完全采用人工分割算法的结果进行了比较.     

多相体系中Ni-PMMA纳米复合材料的γ辐射制备

在多相体系中 ,运用γ射线辐射法 ,在常温常压下成功地一步合成了镍 聚甲基丙烯酸甲酯 (Ni PMMA)纳米复合材料 .XRD、TEM分析和IR光谱表明 ,在此实验条件下 ,镍离子和甲基丙烯酸甲酯已成功地被还原或聚合 ,镍粒子为面心立方 ,尺寸为 7.33nm .研究显示 ,用醋酸钠代替氢氧化钠或氨水作为碱性试剂 ,可以有效地控制体系的pH ,同时不影响单体的聚合 .