Numerical simulation on an interaction of a vortex street with an elliptical leading edge using an unstructured grid

An algorithm for a time accurate incompressible Navier–Stokes solver on an unstructured grid is presented. The algorithm uses a second order, three‐point, backward difference formula for the physical time marching. For each time step, a divergence free flow field is obtained based on an artificial compressibility method. An implicit method with a local time step is used to accelerate the convergence for the pseudotime iteration. To validate the code, an unsteady laminar flow over a circular cylinder at a Reynolds number of 200 is calculated. The results are compared with available experimental and numerical data and good agreements are achieved. Using the developed unsteady code, an interaction of a Karman vortex street with an elliptical leading edge is simulated. The incident Karman vortex street is generated by a circular cylinder located upstream. A clustering to the path of the vortices is achieved easily due to flexibility of an unstructured grid. Details of the interaction mechanism are analysed by investigating evolutions of vortices. Characteristics of the interactions are compared for large‐ and small‐scale vortex streets. Different patterns of the interaction are observed for those two vortex streets and the observation is in agreement with experiment. Copyright © 2004 John Wiley & Sons, Ltd.     

A class of finite difference schemes for interface problems with an HOC approach

In this paper, we propose a new methodology for numerically solving elliptic and parabolic equations with discontinuous coefficients and singular source terms. This new scheme is obtained by clubbing a recently developed higher‐order compact methodology with special interface treatment for the points just next to the points of discontinuity. The overall order of accuracy of the scheme is at least second. We first formulate the scheme for one‐dimensional (1D) problems, and then extend it directly to two‐dimensional (2D) problems in polar coordinates. In the process, we also perform convergence and related analysis for both the cases. Finally, we show a new direction of implementing the methodology to 2D problems in cartesian coordinates. We then conduct numerous numerical studies on a number of problems, both for 1D and 2D cases, including the flow past circular cylinder governed by the incompressible Navier–Stokes equations. We compare our results with existing numerical and experimental results. In all the cases, our formulation is found to produce better results on coarser grids. For the circular cylinder problem, the scheme used is seen to capture all the flow characteristics including the famous von Kármán vortex street. Copyright © 2016 John Wiley & Sons, Ltd.     

Normal Coordinate Analysis of Pyridine-N-Oxide

We have been interested for some time in the study of the hydrogen bonded complexes in the far-infrared region with special attention to the adducts between phenol and pyridine-N-oxides (1). In such systems the intermolecular mode vσ was identified and some intramolecular vibrations related to the N-O group were observed to be remarkably shifted consequent on hydrogen bonding. In this context we wished to obtain a force field for the complex which could fit the observational results. Unfortunately for one of the constituents i. e. pyridine-N-oxide a force field, suitable for our purposes, was not available and therefore preliminarily we determined it. We report here the results of such analysis.     

Investigation of the solubilization of car-emitted Pt,Pd and Rh in street dust and spiked soil samples

A sequential extraction procedure (three-step), proposed by the Standards, Measurements and Testing Programme (formerly BCR) of the European Union, was applied to street dust and spiked soil samples for the determination of PGEs. Analyses were carried out using inductively coupled plasma-mass spectrometry (ICP-MS). The results indicate that up to 5% from Pt, 70% from Pd and 14% from Rh are in mobile forms in street dust. The results for the soil samples spiked with crushed catalytic converter are significantly lower indicating that PGEs are oxidised more efficiently in natural conditions. Additionally Pt and Pd bound to humic acids were investigated.     

Cooling-down of thermal thick probes after flash excitation – A measure for the real energy density?

Though flash lamps are one of the most applied heat sources in the field of Thermographic Testing (TT) using active thermography, only little is known about the actually achieved energy input into test objects. In this paper, an easy to realize sensor concept is proposed and experimentally evaluated. The concept is based on the measurement of the surface temperature of a thermal thick probe after flash excitation. After considering the sensor concept with FEM simulations the experimental investigation of four materials (two polymer and two building materials) is described. It will be shown that a suited coating is essential for the realization of the sensor concept. The experimental results prove the suitability of black rigid PVC as the most promising material. Using a coated PVC sample the energy density of short laser pulses, similar to flashes of flash lamps, could be determined exactly with an estimated relative uncertainty of only a few percent.     

Energy transport in boundary driven quantum spin systems: One-way street phenomenon in models with long range interactions

We address the investigation of non trivial properties of the energy current in boundary driven XXZ quantum spin models. In specific, we focus on the occurrence of the one-way street phenomenon in asymmetrical chains, a phenomenon stronger than rectification, which establishes the existence of a unique way for the energy current in the absence of external magnetic field, that is, the magnitude and direction of the energy flow does not change as we invert the baths at the boundaries. For general target polarizations at the boundaries, we show that such a phenomenon holds in the presence of long range interactions, ingredient which increases the flow and the rectification in chains of classical oscillators, and so, of interest in the study of manipulation and control of the energy flow.     

Dielectric-Barrier Discharges: Their History, Discharge Physics, and Industrial Applications

Dielectric-barrier discharges (silent discharges) are used on a large industrial scale. They combine the advantages of non-equilibrium plasma properties with the ease of atmospheric-pressure operation. A prominent feature is the simple scalability from small laboratory reactors to large industrial installations with megawatt input powers. Efficient and cost-effective all-solid-state power supplies are available. The preferred frequency range lies between 1 kHz and 10 MHz, the preferred pressure range between 10 kPa and 500 kPa. Industrial applications include ozone generation, pollution control, surface treatment, high power CO₂ lasers, ultraviolet excimer lamps, excimer based mercury-free fluorescent lamps, and flat large-area plasma displays. Depending on the application and the operating conditions the discharge can have pronounced filamentary structure or fairly diffuse appearance. History, discharge physics, and plasma chemistry of dielectric-barrier discharges and their applications are discussed in detail.     

基于交通量均分的城市道路网络定向研究

为减少城市交通拥挤,从交通量均分的角度出发,提出了综合反映道路网络局部和整体性质的k最优定向,并且利用奇度点配对的思想为定向问题设计了启发式算法。     

Photodynamic Therapy for Cancer Cells Using a Flash Wave Light Xenon Lamp

We determined photodynamic therapy (PDT) efficacy using a flash wave (FW) and a continuous wave (CW) light, of which the fluence rate was 70 W/cm², for murine thymic lymphoma cells (EL-4) cultivated in vitro. The irradiation frequency and the pulse width of the FW light were in the range of 1–32 Hz and less than one millisecond, respectively. 5-Aminolevulinic acid-induced protoporphyrin IX (ALA-PpIX) was used as a photosensitizer. When EL-4 with ALA administration was irradiated by the light for 4 h (irradiation fluence: 1.0J/cm²), the survival rate of EL-4 by the FW light was lower than that by the CW light, except for the FW light with irradiation frequency of 32 Hz, and decreased gradually with decreasing irradiation frequency. Moreover, the FW light, especially at lower irradiation frequency, was superior to the CW light for the generation of singlet oxygen in an aqueous PpIX solution. Therefore, thehigher PDT efficacy for EL-4 of the FW light would be caused by the greater generation of singlet oxygen in the cells.     

Continuum radiation spectroscopy in a high-pressure argon-mercury lamp

A primary study of the continuum emission from the arc of a high-intensity discharge (HID) lamp with an argon-mercury chemistry at pressures higher than is reported. Spectrally and spatially resolved calibrated continuum spectra from a vertically mounted test lamp (an MHN150 vessel filled at room temperature with 12 mg mercury and 400 mbar argon) are reported for the visible and infrared wavelength range 0.3-. These spectra were analyzed to quantify the infrared (IR) losses and to determine the temperature profile inside the lamp.