Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Local and Parallel Finite Element Algorithms for Eigenvalue Problems

Abstract Some new local and parallel finite element algorithms are proposed and analyzed in this paper foreigenvalue problems.With these algorithms, the solution of an eigenvalue problem on a fine grid is reduced tothe solution of an eigenvalue problem on a relatively coarse grid together with solutions of some linear algebraicsystems on fine grid by using some local and parallel procedure.A theoretical tool for analyzing these algorithmsis some local error estimate that is also obtained in this paper for finite element approximations of eigenvectorson general shape-regular grids.     

An Improved Gradient Projection-based Decomposition Technique for Support Vector Machines

In this paper we propose some improvements to a recent decomposition technique for the large quadratic program arising in training support vector machines. As standard decomposition approaches, the technique we consider is based on the idea to optimize, at each iteration, a subset of the variables through the solution of a quadratic programming subproblem. The innovative features of this approach consist in using a very effective gradient projection method for the inner subproblems and a special rule for selecting the variables to be optimized at each step. These features allow to obtain promising performance by decomposing the problem into few large subproblems instead of many small subproblems as usually done by other decomposition schemes. We improve this technique by introducing a new inner solver and a simple strategy for reducing the computational cost of each iteration. We evaluate the effectiveness of these improvements by solving large-scale benchmark problems and by comparison with a widely used decomposition package.     

基于FPGA并行处理的实时图像相关速度计

研究制作了一种采用高速线阵CCD的实时相关速度计,其测量数据的输出速率可达每秒一万次。针对以往光学相关测速方法的问题进行了讨论,探讨了适合FPGA并行处理的算法,制作了高速线阵CCD摄像机及其处理装置。通过实验验证了系统的可行性和可实现性。     

解线性最小二乘问题的一个新并行算法

讨论了求解无约束线性最小二乘问题的一种并行单纯形法以及对它的改进算法并行共轭梯度—单纯形法 .算法本身具有很强的并行机制 ,能够充分地发挥并行机快速省时的特点 .本文也对算法做了理论分析 ,对算法的收敛性给予了证明 (在二维情形下 ) .最后做了数值实验 (由于软硬件条件的限制 ,并行算法未能在并行计算机上实现 ,鉴于这种情况 ,我们所做的数值实验均是在串行机上完成的 )     

A parallel method for time discretization of parabolic equations based on Laplace transformation and quadrature

We consider the discretization in time of an inhomogeneous parabolicequation in a Banach space setting, using a representation ofthe solution as an integral along a smooth curve in the complexleft half-plane which, after transformation to a finite interval,is then evaluated to high accuracy by a quadrature rule. Thisreduces the problem to a finite set of elliptic equations withcomplex coefficients, which may be solved in parallel. The paperis a further development of earlier work by the authors, wherewe treated the homogeneous equation in a Hilbert space framework.Special attention is given here to the treatment of the forcingterm. The method is combined with finite-element discretizationin spatial variables.     

On computation of the greatest common divisor of several polynomials over a finite field

We propose a probabilistic algorithm to reduce computing the greatest common divisor of m polynomials over a finite field (which requires computing m−1 pairwise greatest common divisors) to computing the greatest common divisor of two polynomials over the same field.     

Large scale petroleum reservoir simulation and parallel preconditioning algorithms research

Solving large scale linear systems efficiently plays an important role in a petroleum reservoir simulator, and the key part is how to choose an effective parallel preconditioner. Properly choosing a good preconditioner has been beyond the pure algebraic field. An integrated preconditioner should include such components as physical background, characteristics of PDE mathematical model, nonlinear solving method, linear     

Vanadium(III) chloride catalyzed Biginelli condensation: solution phase library generation of dihydropyrimidin-(2H)-ones

The three component condensation of an aldehyde, a β-keto ester and urea (thiourea) in the presence of a catalytic amount of VCl₃ is disclosed for the solution phase synthesis of dihydropyrimidinones. The ease of synthesis and work-up allowed the parallel synthesis of a 48-membered library of dihydropyrimidinones quickly and efficiently in good yields.     

Boundary position feedback control of Kirchhoff's non‐linear strings

This paper is concerned with global stabilization of an undamped non‐linear string in the case where any velocity feedback is not available. The linearized system has an infinite number of poles and zeros on the imaginary axis. In the case where any velocity feedback is not available, a parallel compensator is effective. The stabilizer is constructed for the augmented system which consists of the controlled system and a parallel compensator. It is proved that the string can be stabilized by linear boundary control. Copyright © 2003 John Wiley & Sons, Ltd.