排序方式: 共有15条查询结果,搜索用时 250 毫秒
1.
Abstract 10-Hydroxycamptothecin is prepared by chemoselective catalytic hydrogenation of the B-ring of camptothecin over PtO2 with sulfur moderators followed by oxidation using iodobenzenediacetate. New moderators (viz. thioanisole, dimethyl sulfide, diphenyl sulfide, 2-mercapto ethanol), which moderate the hydrogenation of the B- ring of camptothecin, are being explored.
ACKNOWLEDGMENTS
The authors thank the management of Dr. Reddy's Laboratories Ltd. for supporting this work, and support from analytical colleagues is highly appreciated. 相似文献2.
The paper discusses the basic design of the critical facility, whose main purpose is the physics validation of AHWR. Apart
from moderator level control, the facility will have shutdown systems based on shutoff rods and multiple ranges of neutron
detection systems. In addition, it will have a flux mapping system based on 25 fission chambers, distributed in the core.
We are planning to use this reactor for experiments with a suitable source to simulate an ADS system. Any desired sub-criticality
can be achieved by adjusting the moderator level. Apart from perfecting our experimental techniques, in simple configurations,
we intend to study the one-way coupled core in this facility. Preliminary calculations, employing a Monte Carlo code TRIPOLI,
are presented.
相似文献
3.
4.
在硼中子俘获治疗(BNCT)装置中,束流整形体(BSA)的作用是将中子源产生的快中子束流慢化至超热中子能区(0.5 eVE10 keV),并尽可能减弱快中子、热中子和γ射线的成分,同时保证中子的方向性,其设计与优化是BNCT装置设计工作的核心内容之一.本文采用3.5 MeV,10 mA的质子束轰击锂靶,由核反应~7Li(p,n)~7Be产生的中子为源项,针对BSA的慢化体材料和结构、γ屏蔽层和热中子吸收层的厚度等参数进行蒙特卡罗模拟设计与优化.研究发现,采用Fluental和LiF两种慢化材料间隔2 cm层状堆叠的三明治BSA构型,在保证快中子剂量成分(D_f/φ_(epi)),γ剂量成分(D_γ/φ_(epi))和热中子比例φ_(th)/φ_(epi)满足IAEA-TECDOC-1223报告推荐要求的同时,在BSA出口处超热中子注量率优于单独使用Fluental和单独使用LiF的BSA设计.BSA出口处修正的Synder人头几何模型中的剂量分布计算结果显示:上述三明治构型的深度剂量分布与单独使用Fluental材料构型的结果基本相当,优于单独使用LiF构型,表明Fluental和LiF层状堆叠的三明治BSA构型是一种可行的BSA结构. 相似文献
5.
The Gamma-3 assembly is located at the Joint Institute for Nuclear Research, Dubna, Russia. It consists of a cylindrical lead target (ø = 8 cm, L = 58.8 cm) surrounded by reactor grade graphite (110 × 110 × 60 cm). The target was irradiated with a beam of 1.6 GeV deuterons from the Nuclotron accelerator and CR-39 track detectors coupled to LR-115 2B film were used to measure the slow neutron distribution on the surface of the graphite. The detection efficiency of the CR-39 in the CR-39/LR-115 2B system was measured using a custom made calibration setup and found to be (1.12 ± 0.05) × 10−3 and (6.1 ± 1.2) × 10−4 tracks per neutron, for thermal and epithermal neutrons respectively, under the etching and counting procedures described in this work. The irradiation of the Gamma-3 was also simulated using MCNPX 2.7 Monte Carlo code and good agreement between the experimental and calculated track densities was found. This serves as a good validation for the computational models used to simulate spallation neutron production, transport and moderation. 相似文献
6.
Accelerator based positron sources are widely used due to their high intensity. Most of these accelerators are RF accelerators. An LIA (linear induction accelerator) is a kind of high current pulsed accelerator used for radiography. A conceptual design of an intense pulsed positron source based on an LIA is presented in the paper. One advantage of an LIA is its pulsed power being higher than conventional accelerators, which means a higher amount of primary electrons for positron generations per pulse. Another advantage of an LIA is that it is very suitable to decelerate the positron bunch generated by bremsstrahlung pair process due to its ability to adjustably shape the voltage pulse. By implementing LIA cavities to decelerate the positron bunch before it is moderated, the positron yield could be greatly increased. These features may make the LIA based positron source become a high intensity pulsed positron source. 相似文献
7.
正电子湮没技术是一种研究材料的微观缺陷和相变的灵敏工具,在通常的正电子谱仪中,正电子能量为MeV量级,在样品中注入深度比较学(-100μm),主要研究材料体内的平均缺陷密度,慢正电子束方法把正电子的能量降低为keV量级(而且可以调节),注入比较浅(-μm),所以是研究表面缺陷的探测手段,正电子慢化体是产生慢正电子的关键设备,对其研究有重要意义,文章综述了慢化体研究的历史和现状,从物理概念出发介绍使正电子慢化的四种可能方法和当今慢化体的五种几何排列方法,其中应用最广泛的是钨慢化体和百叶窗式的排列方式,效率最高的是惰性气体固体慢化体,而加电场慢化体是有待开发的高效慢化体。 相似文献
8.
This communication describes in detail the design of a new cylindrical neutron spectrometer (CYSP) embedding 7 active thermal neutron detectors in a moderating structure made of polyethylene, borated plastic and lead. The device provides a strong directional response within the energy interval from thermal to hundreds of MeV, being nearly insensitive to neutrons coming from directions other than the cylinder axis with energies up to about 10 MeV. Therefore it will be especially suitable for applications where the neutron spectrum as a function of the emission angle needs to be measured. The Monte Carlo transport code MCNPX has been used to reach the final configuration for the spectrometer in terms of size, collimator, and arrangement of borated plastic and lead layers, number and position of the detectors. Moreover, MCNPX has been also used to calculate the response matrix of the instrument. 相似文献
9.
WANG Bao-Yi MA Yan-Yun WANG Ping CAO Xing-Zhong QIN Xiu-So ZHANG Zhe YU Run-Sheng WEI Long 《中国物理C(英文版)》2008,32(2)
This paper describes the development and application of an intense slow positron beam at IHEP with regard to its two main components.The Variable-Energy Positron Lifetime Spectroscopy (VEPLS) based on the pulsing system consisting of a chopper,a prebuncher and a buncher has been constructed in order to meet the needs of materials science development.At present,the time resolution of the VEPLS can easily reach about 386 ps with a peak-to-background ratio of about 600:1.A plugged-in 22Na positron source section for adjusting the newly built experimental station and for increasing the beam operation efficiency has been constructed.A slow positron beam with an intensity of 2.5x105 e+/s and the beam profile whose diameter is 10 mm has been obtained;the moderation efficiency of the tungsten mesh moderator reaches 5.1x 10-4 as calculated with an original positron source activity of 52 mCi. 相似文献
10.
从解决大学生网络成瘾和抑郁相互影响关系的研究出发,构建了有调节的中介潜变量的循环效应模型.为对模型变量进行效应大小的分析和比较,推导出模型参数的标准化估计.运用我们提出的基于配方约束的潜变量回归的确定性线性算法来计算潜变量的值,避免了交互潜变量计算时观测变量的配对问题.对模型参数的OLS估计可能不具有一致性和无偏性进行了证明,并给出了解决问题的相应算法.总结出模型的算法步骤和变量的效应检验步骤.最后进行了数值模拟,验证了模型的合理性. 相似文献