Polymer 4D printing: Advanced shape-change and beyond

4D printing is an exciting branch of additive manufacturing. It relies on established 3D printing techniques to fabricate objects in much the same way. However, structures which fall into the 4D printed category have the ability to change with time, hence the “extra dimension.” The common perception of 4D printed objects is that of macroscopic single-material structures limited to point-to-point shape change only, in response to either heat or water. However, in the area of polymer 4D printing, recent advancements challenge this understanding. A host of new polymeric materials have been designed which display a variety of wonderful effects brought about by unconventional stimuli, and advanced additive manufacturing techniques have been developed to accommodate them. As a result, the horizons of polymer 4D printing have been broadened beyond what was initially thought possible. In this review, we showcase the many studies which evolve the very definition of polymer 4D printing, and reveal emerging areas of research integral to its advancement.     

3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

Positive ground state solutions for Schrödinger–Poisson system with critical nonlocal term in ℝ3

This paper is dedicated to studying the following Schrödinger–Poisson system $$\left\{\begin{array}{ll}-\mathrm{\Delta }u+V(x)u-K(x)\varphi |u{|}^{3}u=a(x)f(u),& x\in {ℝ}^3,\\ -\mathrm{\Delta }\varphi =K(x)|u{|}^5,& x\in {ℝ}^3.\end{array}\right.$$ Under some different assumptions on functions V(x), K(x), a(x) and f(u), by using the variational approach, we establish the existence of positive ground state solutions.     

Attractors for a Three-Dimensional Thermo-Mechanical Model of Shape Memory Alloys

Abstract In this note, we consider a Frémond model of shape memory alloys. Let us imagine a piece of a shape memory alloy which is fixed on one part of its boundary, and assume that forcing terms, e.g., heat sources and external stress on the remaining part of its boundary, converge to some time-independent functions, in appropriate senses, as time goes to infinity. Under the above assumption, we shall discuss the asymptotic stability for the dynamical system from the viewpoint of the global attractor. More precisely, we generalize the paper [12] dealing with the one-dimensional case. First, we show the existence of the global attractor for the limiting autonomous dynamical system; then we characterize the asymptotic stability for the non-autonomous case by the limiting global attractor. * Project supported by the MIUR-COFIN 2004 research program on “Mathematical Modelling and Analysis of Free Boundary Problems”.     

甲基紫掺杂聚乙烯醇薄膜材料红光多重全息存储

甲基紫掺杂聚乙烯醇薄膜材料在两束相干光照射下生成相位光栅.当改变一束相干光光程,通过监测相位光栅的一级衍射信号强度的变化,可以检测相位光栅的生长和擦除过程.在此实验基础上,讨论了甲基紫掺杂聚乙烯醇薄膜材料多重全息存储的原理与结果.     

中国股市长记忆的修正R/S分析

本文在比较各种长记忆检验方法优缺点的基础上,采用修正的R/S分析检验我国沪深两股市日收益和日绝对收益序列的长记忆性。结果表明在0.05的显著水平下,两股市的日收益序列均无长记忆,但深圳成指日收益序列的记忆长度比上证综指日收益序列的记忆长度长;以日绝对收益序列为代表的波动序列具有较强的长记忆性。     

CaractErisation Par DSC Des Sequences De Transformation Au Cours D'un Chauffage Lent Des Alliages Amf A Base De Cu–Al–Ni

Quenching of the eutectoidal composition of the shape memory alloys (SMA’s) allowed us to display the gradual transition of the martensitic structure as a function of the composition. Indeed, we have verified that for low Al and Ni percentages, the martensite structure obtained is β′, while, for high Al and Ni (Al<13.3 mass%) contents, the martensite structure is essentially of β₁′ type. Elsewhere, we have observed that a nickel addition (<4.3 mass%) operates simultaneously on the composition of the eutectoidal pointand the domain of the different martensitic structures types. During reheating of the quenched structure, the transformation sequences of the martensite to the parent phase (β1), then the decomposition of the later phase into the equilibrium phases, and finally, the redissolution of all phases to form the β phase at high temperature, are rather similar. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mathematical modelling of the oxidation of nickel titanium alloys

A one-dimensional bulk reaction model for the oxidation of nickeltitanium is formulated, with preferential oxidation of titaniumbeing included. The modelling is directed at the better understandingof the dominant mechanisms involved in the oxidation processand their significance for the biocompatibility of the alloy.Two different regimes for the relative diffusivities of oxygenand the metals are investigated. By assuming fast bulk reactions,different asymptotic structures emerge in different parameterregimes and the resulting models take the form of moving boundaryproblems. Different profiles of nickel concentration are obtained:in particular a nickel-rich layer (observed in practice) ispresent below the oxide/metal interface for the case when oxygenand the metals diffuse at comparable rates.     

带惩罚项与随机输入的BP神经网络在线梯度学习算法的收敛性

本文对三层BP神经网络中带有惩罚项的在线梯度学习算法的收敛性问题进行了研究,在网络训练每一轮开始执行之前,对训练样本随机进行重排,以使网络学习更容易跳出局部极小,文中给出了误差函数的单调性定理以及该算法的弱收敛和强收敛性定理。     

Oscillation theorems for differential equations with a nonlinear damping term

In this paper, we are concerned with a class of nonlinear second-order differential equations with a nonlinear damping term. Passage to more general class of equations allows us to remove a restrictive condition usually imposed on the nonlinearity, and, as a consequence, our results apply to wider classes of nonlinear differential equations. Two illustrative examples are considered.