直流稳压电源波形演示器制作说明

直流稳压电源可以将交流电压变换为直流电压,并使之稳定,在我们现实生活中应用很广泛,在实验中我们利用的电学知识,设计制造了一种直流稳压电源。本文简要介绍了这种直流稳压电源波形演示器的设计目的和电路原理,重点阐述了它的制作流程、滤波和稳压原理以及性能测试输出波形。     

Comparison of two models for managing reliability growth during product design

Relying on reliability growth testing to improve system designis neither usually effective nor efficient. Instead it is importantto design in reliability. This requires models to estimate reliabilitygrowth in the design that can be used to assess whether goalreliability will be achieved within the target timescale forthe design process. Many models have been developed for analysisof reliability growth on test, but there has been much lessattention given to reliability growth in design. This paperdescribes and compares two models: one motivated by the practicalengineering process; the other by extending the reasoning ofstatistical reliability growth modelling. Both models are referencedin the recently revised edition of international standard IEC61164. However, there has been no reported evaluation of theirproperties. Therefore, this paper explores the commonalitiesand differences between these models through an assessment oftheir logic and their application to an industrial example.Recommendations are given for the use of reliability growthmodels to aid management of the design process and to informproduct development.     

串联双环光微谐振器的滤波特性

详细研究了串联双环光微谐振器的光带通滤波特性，给出了其通带带宽的公式，分析了出／入环光耦合系数和环间光耦合系数对通带特性的影响，计算并特别强调了滤波通带的结构特点，也分析了微环中存在的光损耗对串联双环光微谐振器的滤波特性的影响。     

Oracle Inequalities for Efromovich–Pinsker Blockwise Estimates

Oracle inequality is a relatively new statistical tool for the analysis of nonparametric adaptive estimates. Oracle is a good pseudo-estimate that is based on both data and an underlying estimated curve. An oracle inequality shows how well an adaptive estimator mimics the oracle for a particular underlying curve. The most advanced oracle inequalities have been recently obtained by Cavalier and Tsybakov (2001) for Stein type blockwise estimates used in filtering a signal from a stationary white Gaussian process. The authors also conjecture that a similar result can be obtained for Efromovich–Pinsker (EP) type blockwise estimators where their approach, based on Stein's formula for risk calculation, does not work. This article proves the conjecture and extends it upon more general models which include not stationary and dependent processes. Other possible extensions, a discussion of practical implications and a numerical study are also presented.     

Reduction of Entrained Hydroxy Species in Ormosil Films for Integrated Optics

Organically modified silicates (ormosils) have been viewed as possible materials for optical signal processing devices for communications networks. One significant problem obstructing their use in this application is the absorption of infrared light by hydroxy species (present for example in silanol groups (SiOH) and water) around the communications wavelengths (1310 and 1550 nm). We have investigated several ormosil compositions, synthesised via an aqueous sol-gel method, to determine if residual hydroxy groups can be removed more effectively via reducing the connectivity of the material by increasing the number of organic groups (such as Si—CH₃). Furthermore, we have investigated the effect of different inert atmospheres on the drying process. It was found that reducing the connectivity does promote the removal of hydroxy absorption, mainly via the condensation of residual silanol groups, but also by removal of residual water, depending on the other precursors in the system. It was also found that the drying atmosphere used (nitrogen or helium) had no effect on the drying process.     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

Performance and simulation of an on-board guided-wave optical processor for airborne SAR applications

This paper describes the performance and simulation of a compact integrated optical processor for the real-time reconstruction of two-dimensional images in airborne stripmap synthetic aperture radar applications. The functional behavior of the processor is explained in some detail. The design criteria are briefly given. The simulation step allowed the main processor characteristics and properties to be identified. A number of comparisons were obtained in airborne SAR mission scenarios between the predictions of the optical device and those achieved by the modern electronic digital approach, based on the wavefront reconstruction method by matched filtering.     

高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。     

Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

Laser nanosources based on planar photonic crystals as new platforms for nanophotonic devices

Two-dimensional photonic crystal lasers have been fabricated on III–V semiconductor slabs. Tuning of the spontaneous emission in micro and nanocavities has been achieved by accurate control of the slab thickness. Different structures, some of them of new application to photonic crystal lasers, have been fabricated like the Suzuki-phase or the coupled-cavity ring-like resonators. Laser emission has been obtained by pulsed optical pumping. Optical characterization of the lasing modes have been performed showing one or more laser peaks centred around 1.55 μm. Far field characterization of the emission pattern has been realized showing different patterns depending on the geometrical shape of the structures. These kinds of devices may be used as efficient nanolaser sources for optical communications or optical sensors.