空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。     

Transport as a consequence of state-dependent diffusion

Overdamped particles subject to a drift in a force field with sinusoidal space dependence and also a sinusoidally modulated space-dependent diffusion, with the same period as the drift, experience a net driving force. The resulting current depends on the amplitude of the modulation of the diffusion and is a periodic function of the phase difference between the sinusoidal drift and the sinusoidal modulation of the diffusion. For small modulation amplitudes a particle subject to state-dependent noise behaves the same way as a particle subject to thermal noise but with a drift which, in addition to the sinusoidal term, contains a net force term [M. Büttiker,Z. Phys. B 68:161 (1987)]. A specific example of this behavior [N. G. van Kampen,IBM J. Res. Dev. 32:107 (1988); R. Landauer,J. Stat. Phys. 53:233 (1988).] is the motion of overdamped particles in a ring subject to a nonuniform temperature field. When the drift and the temperature, which are periodic with a period equal to the ring circumference, are not in phase a noise-induced circulating current results.This paper will appear in a forthcoming issue of theJournal of Statistical Physics.     

基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

Primal cutting plane algorithms revisited

Dual fractional cutting plane algorithms, in which cutting planes are used to iteratively tighten a linear relaxation of an integer program, are well-known and form the basis of the highly successful branch-and-cut method. It is rather less well-known that various primal cutting plane algorithms were developed in the 1960s, for example by Young. In a primal algorithm, the main role of the cutting planes is to enable a feasible solution to the original problem to be improved. Research on these algorithms has been almost non-existent.  In this paper we argue for a re-examination of these primal methods. We describe a new primal algorithm for pure 0-1 problems based on strong valid inequalities and give some encouraging computational results. Possible extensions to the case of general mixed-integer programs are also discussed.     

The Millimeter Wave Tomography Application for the Subsurface Imaging

In the present paper new results of modeling and experimental investigation on millimeter wave subsurface tomography are submitted. Tomographic algorithm is employed for imaging of subsurface objects in the case when conductivity of probed medium is not equal to zero. The possibilities and restrictions of this algorithm for image processing are shown both as a result of modeling and as a result of experiments. A new tomography setup allowing obtaining images of different inhomogeneities in dielectric media is considered.     

直流稳压电源波形演示器制作说明

直流稳压电源可以将交流电压变换为直流电压,并使之稳定,在我们现实生活中应用很广泛,在实验中我们利用的电学知识,设计制造了一种直流稳压电源。本文简要介绍了这种直流稳压电源波形演示器的设计目的和电路原理,重点阐述了它的制作流程、滤波和稳压原理以及性能测试输出波形。     

聚丙烯孔洞铁电驻极体膜的电极化及其电荷动态特性

根据栅控恒压电晕充电组合反极性电晕补偿充电法的实验结果计算出铁电驻极体的极化强度.结果说明，伴随着薄膜内孔洞气体的Paschen击穿，该铁电体的极化强度随栅压增加而显著上升.利用上述充电方法和热刺激放电(TSD)谱的分析讨论了这类空间电荷型宏观电偶极子，及与其补偿的空间电荷热退极化的电荷动态特性；阐明了这两类俘获电荷的能阱分布，即构成宏观电偶极子的位于孔洞上下介质层内的等值异号空间电荷分别被俘获在深、浅两种能值陷阱内，而位于薄膜表面层的注入空间电荷则被俘获在中等能值陷阱中. 关键词： 反极性电晕补偿充电法 铁电驻极体 充电电流 热刺激放电     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

Using rank-1 lift-and-project closures to generate cuts for 0–1 MIPs, a computational investigation

Various techniques for building relaxations and generating valid inequalities for pure or mixed integer programming problems without special structure are reviewed and compared computationally. Besides classical techniques such as Gomory cuts, Mixed Integer Rounding cuts, lift-and-project and reformulation–linearization techniques, a new variant is also investigated: the use of the relaxation corresponding to the intersection of simple disjunction polyhedra (i.e. the so-called elementary closure of lift-and-project cuts). Systematic comparative computational results are reported on series of test problems including multidimensional knapsack problems (MKP) and MIPLIB test problems. From the results obtained, the relaxation based on the elementary closure of lift-and-project cuts appears to be one of the most promising.     

Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…