厚度对非极性聚合物薄膜驻极体电荷储存及电荷动态特性的影响

以Du Pont公司的商用Teflon FEP A型薄膜为例，通过热脉冲技术、等温表面电位衰减测量和开路热刺激放电电流谱分析等实验结果，讨论了经常温和高温电晕充电后样品厚度对薄膜驻极体的沉积电荷密度、薄膜驻极体的内电场、体电导率以及电荷储存稳定性的影响.通过热脉冲技术组合电导率温度曲线的测量，研究了在不同温度条件下样品厚度对沉积电荷层的平均电荷重心移动的影响.结果表明：在充电参数一定的条件下，随着膜厚的降低，储存电荷密度上升，但电荷稳定性有所下降.因此，合理地调控薄膜厚度，可以有效地优化驻极体的电荷储存能 关键词： 厚度 驻极体 电荷储存能力 电荷稳定性     

Maintenance of Soft Calibration Models in the Determination of Zinc,Cadmium, Lead and Copper by Differential Pulse Anodic Stripping Voltammetry

A strategy for constructing a global multivariate calibration model that includes calibration samples measured over time on different days is developed and applied in electroanalysis. Both synthetic and real samples (tap, extracted and river water) are analyzed by differential‐pulse anodic stripping voltammetry, showing the suitability of the global model constructed that provides successful results similar to those of the usual multivariate calibration. In addition the capability of discrimination of this model is evaluated in prediction for the mean of three replicates with estimation of probability of false noncompliance, α, and false compliance, β, being found 3.1, 11.2, 6.7 and 64.7 nM for nominal concentrations of zinc, cadmium, lead and copper of 96.0, 40.4, 37.3 and 328.0 nM respectively when α=β=0.05. It has been proven that the use of the global calibration does not imply a loss of multivariate analytical sensitivity, using this parameter as quality index of the analytical procedure. The viability of using calibration maintenance strategies with electroanalytical techniques is shown, providing a way to save time and experimental effort when these techniques are used in routine analysis.     

6σ管理中需要澄清的几个问题

6σ管理作为组织实施连续质量改进的一种经营策略,已引起企业界和学术界的极大兴趣,并在一些企业中得到很好应用。正确实施6σ,需要对其基本概念、假设条件、相关约束等有一个较为全面的了解和认识。本文探讨了6σ文献和应用过程中需要关注的几个问题,其中包括6σ的基本概念和特点;分布假设;过程均值1.5σ漂移的可行性;过程能力指数;短期波动和长期波动;6σ改进和6σ设计等。     

甲醛与乙腈相互作用的理论研究

在HF/ 6 311G(d ,p)、MP2 / 6 311G(d ,p)和B3LYP/ 6 311G(d ,p)水平上 ,对H2 CO和CH3 CN以及设计的 4种结构H2 CO…CH3 CN复合物等进行几何全优化和振动频率计算 ,排除振动频率为负值的非局域极小点结构 ,并对稳定的环状构型复合物结合能进行基组重叠误差校正和零点振动能校正 .分子间相互作用的能量分解分析显示 ,静电能在H2 CO…CH3 CN相互作用能量中占主导地位 ,电荷转移能居第二位 .     

回填材料膨润土对放射性气体滞留能力模拟研究

利用各种分析手段对膨润土的物理特性进行了表征 .X射线衍射分析表明钠基膨润土呈典型的六方晶胞 ,晶胞参数是 :a轴 4 .913,c轴 5 .4 0 5 ;差热分析曲线在低温区和高温区有明显的吸热峰出现 ;元素分析钠、钾离子的含量大于钙、镁离子的含量 ,在性能上表现为钠质膨润土具有较强的离子交换能力 ;显微分析表明其表面呈皱隙状 ,测定比表面积高达 2 4 .5 2m2 /g;吸水率测定表明膨胀率大 ,说明它具有密封功能 ,可有效阻滞地下水的渗入 .利用SF6示踪技术 ,通过采集不同时间段取样池样品 ,分析样品中示踪气体浓度 ,绘制取样池示踪气体浓度随时间的变化关系曲线 ,根据费克扩散定律计算扩散系数 .实验结果表明 ,随着压实膨润土密度的增大 ,示踪气体扩散系数迅速减小 ,当密度大于 1.8g/cm3 时 ,扩散系数降至 10 -9m2 /s.研究结果表明 ,膨润土性能优化是通过在膨润土中添加适量的活性炭 ,可明显改善其对气体的阻滞能力 ;增加其对放射性气体滞留能力 ;添加少量的石英砂增加其机械性能、导热性和减少蠕变性 ,将引起对气体阻滞能力的下降 .综合考虑 ,在膨润土中各添加 5 %活性炭和石英砂 ,既对气体具有较好的滞留能力 ,又具有较好的工程特性 .     

Validation of HPLC Analysis of 2-Phenoxyethanol, 1-Phenoxypropan-2-ol, Methyl, Ethyl, Propyl, Butyl and Benzyl 4-Hydroxybenzoate (Parabens) in Cosmetic Products, with Emphasis on Decision Limit and Detection Capability

The Commission Decision of August 12, 2002 on the performance of analytical methods and the interpretation of results was applied to the HPLC method for the analysis of parabens, 2-phenoxyethanol and 1-phenoxypropan-2-ol in cosmetic products. This method is published in the seventh Directive 96/45/EC of the European Commission. Non-compliant concentrations, taking into account the data distribution (CC) and the probability of false negative values (CC) were determined. The repeatability and reproducibility amount to <4% and <7%, respectively. These values were obtained with blanc samples that were fortified in the laboratory. Calibration linearity was confirmed by absence of lack of fit for all seven preservatives. Matrix effects on the determinations of the preservatives in body milk or shampoo are negligible.     

可分解均衡函数均衡力度分析

证明了惩罚力度越大的均衡函数得到的变权向量构建的变权决策模型越偏于保守;而激励力度越大的均衡函数得到的变权决策模型越偏于乐观,这些结果与均衡函数的原始含义是一致的.最后,详细分析了几类常见的可分解均衡函数的惩罚力度和激励力度随着参数的变化情况.     

水面舰艇编队的最佳防空队形探讨

最佳防御队形以编队对来袭导弹的可探测面积尽可能大为前提,并以"抗饱和攻击能力"为衡量标准.各方向的可拦截批次受两方面因素限制:一是来袭导弹被发现时其与指挥舰的距离,一般距离越大,防御准备就越充分,可拦截批次就越大;二是护卫舰到来袭导弹轨迹的距离,一般距离越小,单次拦截时间就越短,可拦截批次就越大.定义以概率1可拦截批次最小的方向为最危险方向,经计算初始队形各方向可拦截的批次不等,通过"削峰补谷"的方式予以均衡和优化.若以拦截批次的期望为标准,最危险方向与以概率1可拦截的批次为标准的结果相同.如果得到空中预警机的信息支援,在最危险方向上编队就可更早地对距离指挥舰148.4km远的导弹发起拦截,增大编队的抗饱和攻击能力,但由于防空导弹射程限制,预警机提供的信,息支援无法得到充分利用,此时限制编队抗饱和攻击能力的主要矛盾转向防空导弹的射程.     

What can statistical process control show us about ionization chamber stability?

PurposeStatistical process control (SPC) has been shown to be a suitable tool for medical physicists to monitor quality and keep variability low and within specifications. We report our findings regarding ionisation chamber stability in our department when using a radioactive stability check device (RSCD) and we compare them with similar previously published records, including calibration results.MethodsWe retrospectively studied the stability of a PPC 40 parallel-plate chamber, and two Farmer chambers (FC65-G and FC65-P) by checking them with dedicated RSCDs. We analysed the data following SPC methodology which includes plotting I-MR control charts, monitoring out-of-control observations, calculating process capability ratios (C_p), and estimating conformance to specifications. We also estimated the C_p and adherence to specifications of previously published data.ResultsThe PPC40 chamber hardly went out of the control limits over the whole six-year period assessed. However, Farmer chamber verifications drifted in opposite directions in phase II, and the deviations observed did not agree with their calibration records, which only increased by a maximum of 0.5%. In phase I the most unstable chamber was the FC65-P with a C_p equal to 0.9 at a specification level of ±1%. The PPC40 chamber was stable to within a maximum C_p of 1.3. Several sets of analysed data, including ours and those from other authors, fitted well within these limits: within ±1.9% and ±1.5% for a C_p of 1.5 and 1.33 respectively.ConclusionsSPC with constant long-term RSCD checking gave us a meaningful plot of the instability of our ionisation chambers. Although a period of two years between calibrations should not be surpassed, in the interim this check can conform to specifications of ±1.5%.     

Co1−xFe2+xO4 (x = 0.1, 0.2) anode materials for rechargeable lithium-ion batteries

A cobalt-poor or iron rich bicomponent mixture of Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ anode materials have been successfully prepared using simple, cost-effective, and scalable urea-assisted auto-combustion synthesis. The threshold limit of lower cobalt stoichiometry in CoFe₂O₄ that leads to impressive electrochemical performance was identified. The electrochemical performance shows that the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode exhibits high capacity and rate capability in comparison to a Co_0.8Fe_2.2O₄/Fe₂O₃ electrode, and the obtained data is comparable with that reported for cobalt-rich CoFe₂O₄. The better rate performance of the Co_0.9Fe_2.1O₄/Fe₂O₃ electrode is ascribed to its unique stoichiometry, which intimately prefers the combination of Fe₂O₃ with Co_1−xFe_2+xO₄ and the high electrical conductivity. Further, the high reversible capacity in Co_0.9Fe_2.1O₄/Fe₂O₃ and Co_0.8Fe_2.2O₄/Fe₂O₃ electrodes is most likely attributed to the synergistic electrochemical activity of both the nanostructured materials (Co_1−xFe_2+xO₄ and Fe₂O₃), reaching beyond the well-established mechanisms of charge storage in these two phases.