一类相空间中的准几率分布函数系

定义了一类相空间中的准几率分布函数系，这个准几率分布函数系直接建立在具有更加广泛意义的量子相空间Schr?dinger方程解的基础之上，其中定义_α=αp-i?q和_α=(1-α)q+i?p.发现了两个有趣的关系.(1)建立的量子相空间Schr?dinger方程的解实际上是对函数φ(λ)exp［i(1-α)qp］做窗口Fourier变换.(2)这个窗口函数g(λ)起着选择窗口形式的作用，而且不同的窗口对应着不同的分布函数.当g(λ)是一个代表Gauss窗的Gauss函数的时候，准几率分布函数就是一个类似于Husimi的分布函数f^HL_α(q,p)；当g(λ)是一个表示椭圆的复函数时，准几率分布函数就是一个椭圆分布函数f^E_α(q,p)；再在g(λ)为复函数的基础上附加α=0，就可得到标准序分布函数f^S(q,p)、反标准序分布函数f^AS(q,p)和Wigner分布函数f^W(q,p)，此时g(λ)表示高度为1/12π?而长度为λ的矩形窗. 关键词： 窗口Fourier变换 相空间 Wigner分布函数     

浮栅ROM器件辐射效应机理分析

分析了浮栅ROM器件的辐射效应机理，合理地解释了实验中观察到的现象.指出辐射产生的电子空穴对在器件中形成的氧化物陷阱电荷和界面陷阱电荷是导致存储单元及其外围电路出现错误的原因.浮栅ROM器件的中子、质子和⁶⁰Co γ辐射效应都是总剂量效应 . 关键词： FLASH ROM EEPROM 中子 质子 60Co γ')" href="#">⁶⁰Co γ 总剂量效应     

CNx纳米管的制备、结构观察及低场致电子发射性能研究

采用高温热解法，以乙二胺为前驱液，在沉积有铁催化剂的p型硅（111）基底上制备出了定向生长的CNx纳米管.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx纳米管进行了形貌观察和表征.CNx纳米管的高度在20?μm左右，直径在50—100nm之间，具有明显的“竹节状”结构，结晶有序度较差.对CNx纳米管薄膜进行低场致发射性能测试：外加电场为1.4V/μm，观察到20?μA /cm2发射电流，外电场升至2.54V/μm时发射电流达到1.280mA/cm2，在较高外电场下，没有发现电流“饱和”.这比 关键词： CNx纳米管 高温热解 “竹节状”结构 场致发射     

Non planéité de cyclopenténones substituées analyse conformationnelle par résonance magnétique nucléaire

The stereochemistry of substituted cyclopent-2-en-1-ones was studied by NMR. The existence of non-planar rings is indicated and conformational analysis, based principally upon examination of the coupling constants enables the conformational population to be estimated; trans dihalogeno derivatives, for example, occur predominantly in the diaxial form.     

All-glass open-split interface for capillary GC/MS

This paper describes a design for an all-glass GC/MS interface. The design has advantages due to low dead volume, lack of column effluent adsorption and degradation, simple interface production and installation, and ease of column mounting/dismounting.     

Synthesis,crystal structure and photo-induced isomerization of [ N,N ′- bis (4-fluorobenzylidene) ethylenediamine]bromo(triphenylphosphine)copper(I) complex

Abstract

The electrochemical behavior of VOQ₂OH or [VOQ₂-OVOQ₂] (Q = 8-hydroxyquinohnate anion) has been investigated by cyclic voltammetry in acetonitnie solutions. Although both species exist simultaneously at every condition analyzed, they can be clearly differentiated by this method. The effect of trace amounts of water on the electrochemical behavior is also discussed.     

Ambident Reactivity of Imidazolium Cations as Evidence of the Dynamic Nature of N-Heterocyclic Carbene-Mediated Organocatalysis

This work reveals ambident nucleophilic reactivity of imidazolium cations towards carbonyl compounds at the C2 or C4 carbene centers depending on the steric properties of the substrates and reaction conditions. Such an adaptive behavior indicates the dynamic nature of organocatalysis proceeding via a covalent interaction of imidazolium carbenes with carbonyl substrates and can be explained by generation of the H-bonded ditopic carbanionic carbenes.     

Study of “Racemic Compound-Like” Behavior of Diastereomeric Mixture of Pinanyl Sulfoxides by X-Ray Diffraction,IR Spectroscopy,and DFT Calculations

Abstract

The oxidation of a β-hydroxysulfide in the pinane series by use of m-chloroperbenzoic acid resulted in the formation of the corresponding β-hydroxysulfoxide as a mixture of two diastereomers in 4:5 ratio. According to single-crystal X-ray diffraction (XRD) results, it is established that the diastereomeric mixture of sulfoxides crystallizes in the “racemic compound-like” manner under formation of asymmetric dimers through S=O··H–O interactions. This asymmetric dimer formed from diastereomeric molecules is a structural unit in both crystal modifications, the triclinic and the monoclinic one. The behavior of the diastereomeric mixture of pinane derived sulfoxides in crystals, melts and in tetrachloromethane solutions was studied by IR spectroscopy. The density functional theory (DFT) method with 6-31G (d, p) basis set was used to calculate the optimized geometrical parameters and vibrational frequencies of different associates in solutions. The calculated vibrational frequencies are compared with experimental IR spectra.     

Studies on the Particle Morphology of Waterborne Cationic Polyurethane/Polyacrylate Microemulsions

Polyurethane containing tertiary nitrogen atoms was synthesized from polyol, diphenylmethane diisoccyanate (MDI) and N‐methyl diethanolamine. The polymer was converted into cationomers by quarternizing with methacrylic acid (MAA) and then dispersed in water. In this reaction, methyl methacrylate (MMA) was used to decrease viscosity; at the same time, it was the monomer in the later reaction. Finally the cationic polyurethane dispersions were further polymerized with an oil‐soluble initiator, azobisisobutyronitrile (AIBN), water‐soluble initiator, K₂S₂O₈ (KPS) and the mixture of AIBN and KPS. The different emulsion particles with shell‐core structure, “invert” shell‐core structure and “irregular” sandwich structure were obtained; the morphological structures were characterized by TEM observation, FT‐IR and particle size analysis.     

Handling of Environmental and Biological Samples via Pre-Column Technologies

Abstract

Sample handling is still a weak point in chromatography and in analytical chemisty in general. One consideration is the automation potential of new procedures. Solid-liquid extraction techniques in combination with pre-column technology are particularly promising in this regards. The construction and geometry of pre-columns both for conventional and narrow-bore HPLC are of major importance, since band broadening should be kept at a minimum for an optimal functioning of the analytical system. The various operations that can be carried out with such a pre-column are trace-enrichment, clean-up of the sample which depends on the type of adsorbents used in the precolumn, i.e., polar or apolar materials, ion exchangers or metal covered surfaces, etc., protection of the analytical column, field sampling and storage of samples and as a substrate for on-column chemical derivatizations. These various operations are demonstrated with practical examples from the fields of environmental and biological analysis. The selectivity can be further enhanced by coupling precolumn technology with selective detection modes such as diode array UV, electrochemical or fluorescence detection. This enables the construction of optimal and integrated analysis sytems which are fully automated and microprocessor controlled. They can also be made compatible with miniaturized LC-technology.