负动量压缩因子的环形对撞机磁聚焦结构的研究

探讨了设计负动量压缩因子(α_p<0)的正负电子对撞机储存环磁聚焦结构的可行性及方法.作为应用实例,说明了设计α_p<0的τ–粲工厂磁聚焦结构的可能性.     

Cold compaction of ceramic powder: Computational analysis of the effect of pressing method and die shape

This paper deals with a computational analysis of the influence of the pressing method and part geometry on the final density distribution in the cold compaction process of ceramic alumina powders. The analysis is based on the explicit finite-element model proposed and validated in a previous study. The mechanical behavior of the processing material is described using a multisurface elastoplastic model, the modified Drucker-Prager/Cap model Published in Prikladnaya Mekhanika, Vol. 43, No. 10, pp. 129–134, October 2007.     

Time saving fluid dynamic predictions in a wetting-drying process: A hypothesis for vertisols

This paper is aimed at investigating the effect of the initial water content in a vertisol sample on the whole wetting-drying process leading the system to a change in volume. In order to do this, an experimental setup was realized and employed with very thin soil layers wetted from below (“per ascensum”). The results show that the effect of the initial water content on the swelling-shrinkage process is to shift the corresponding curve e-ϑ towards bigger-smaller values of the humidity but does not seem to affect the dynamics of the process. The text was submitted by the authors in English.     

Compaction of nanosilicon pellets and sol-deposited films via high-vacuum annealing

1. Download : Download high-res image (121KB)
2. Download : Download full-size image

     

合肥电子储存环基本参数的测量

 为了给改造后的合肥储存环留下参考数据,同时为了找到储存环存在的物理问题,储存环特性参数首次被系统测量,它们是动量扩张因子、色散函数、自然色品、校正色品和中心频率。     

粉末高速压制成形过程中的应力波分析

应用离散单元法,模拟了粉末高速压制成形过程中的压力传播过程.根据粉末高速压制成形的工艺特性,把一次压制过程分为弹性加载、塑性变形、弹性卸载三个阶段;基于离散单元法的基本理论,分别建立了三个阶段的控制方程;应用PFC2D软件对粉末高速压制过程模腔内部颗粒的运动状态进行了数值模拟,给出了压坯内部的压力分布,得出了实验中无法测量的压坯内部应力传播波形.数值模拟结果显示,压力作用曲线表现出明显的弛豫现象,形成了倾斜度不同的锯齿状加载波形和卸载波形,压坯底层的应力波与实验得到的应力波相符. 关键词： 高速压制成形 离散单元法 接触模型 应力波     

Shock wave working of high-T c materials

Abstract

The properties of high T_c-ceramics (Y-123, Bi-1112, Bi-4334, Bi-4457, (Bi-Pb)-4457) under shock loading and subsequent heat treatment were investigated. The peculiarities of their structure, tecture creation, changes of superconductivity parameters depending on loading conditions at P～ 10GPa Were revealed, and regimes of heat treatment were determined. The possibilities of obtaining crack-free cylindrical superconducting shields as well as strong metal high-T^cceramic joints were demonstrated.     

About the influence of friction and polydispersity on the jamming behavior of bead assemblies

We study the jamming of bead assemblies placed in a cylindrical container whose bottom is pierced with a circular hole. Their jamming behavior is quantified here by the median jamming diameter, that is the diameter of the hole for which the jamming probability is 0.5. Median jamming diameters of monodisperse assemblies are obtained numerically using the Distinct Element Method and experimentally with steel beads. We obtain good agreement between numerical and experimental results. The influence of friction is then investigated. In particular, the formation of concentric bead rings is observed for low frictions. We identify this phenomenon as a boundary effect and study its influence on jamming. Relying on measures obtained from simulation runs, the median jamming diameter of bidisperse bead assemblies is finally found to depend only on the volume-average diameter of their constituting beads. We formulate this as a tentative law and validate it using bidisperse assemblies of steel beads.     

The influence of grain shape,friction and cohesion on granular compaction dynamics

This article is a review of our recent and new experimental works on granular compaction. The effects of various microscopic parameters on the compaction dynamics are addressed, in particular the influence of the grain shape, the friction and the cohesion between the grains. Two dimensionnal and three dimensionnal systems are analysed. And the role of dimensionality will be emphasized. Theoretical and numerical investigations provide additional informations about that phenomenon. Indeed numerical models permit us to study the influence of some parameters not easily accessible experimentally. Our results show that the above mentioned parameters have a deep impact on the compaction dynamics. Anisotropic grains lead to two different compaction regimes separated by a “burst" of the packing fraction. Friction is observed to modify how the grains are arranged in the pile. This is confirmed by numerical simulations. Cohesive forces between particles inhibit compaction and lead to extremely low values of the packing fraction.