An efficient numerical scheme for precise time integration of a diffusion-dissolution/precipitation chemical system

A numerical scheme based on an operator splitting method and a dense output event location algorithm is proposed to integrate a diffusion-dissolution/precipitation chemical initial-boundary value problem with jumping nonlinearities. The numerical analysis of the scheme is carried out and it is proved to be of order 2 in time. This global order estimate is illustrated numerically on a test case.

     

满足Solow条件的矩阵的性质

讨论了满足 Solow条件矩阵的几个性质 ,并给出了与此相关的经济意义 .     

非均匀加宽单模激光器的最佳透射率

给出四能级系统非均匀加宽单模激光器最佳透射率的表达式和分布曲线,并与均匀加宽单模激光器最佳透射率进行了比较.叙述了非均匀加宽单模激光器的特点.     

氩离子激光器输出光功率稳定度与光反馈应用

通过实验观测氩离子激光器工作电流与输出光功率及其稳定性之间的关系，采用光反馈解决了反馈工作点的设置和跟踪调解，使输出光功率稳定性得到明显提高。     

用DEA方法测算产出弹性

本文主要讨论并给出了把ＤＥＡ模型Ｃ２ＧＳ２用于测算产出的弧弹性的方法。     

Study on the possibilities of controlling the laser output beam properties by an intracavity deformable mirror

The possibilities of controlling the laser beam properties by a deformable mirror introduced into the laser optical cavity were studied theoretically and experimentally. The experiments were performed under conditions of an industrial high power transverse flow cw CO₂ laser operating with a stable resonator of a folded configuration. A deformable bimorph mirror of a surface profile controlled by the voltage applied to the mirror electrodes is implemented to the laser system as a back cavity mirror or as a one of the inner folding mirrors. The near-and far-field characteristics of the laser beam versus the resonator configuration controlled by the changes of the focal length of the deformable mirror are discussed in the paper. The analysis reveals that the resonator with an inner deformable mirror is much more sensitive to the mirror curvature variations than the resonator in which the deformable mirror is used as a back cavity mirror. The presented results show that dynamic and controllable changes in the resonator properties result in the controlled modification and optimisation of the laser output power and spatial parameters of the laser radiation.     

Runge–Kutta interpolants for high precision computations

Runge–Kutta (RK) pairs furnish approximations of the solution of an initial value problem at discrete points in the interval of integration. Many techniques for enriching these methods with continuous approximations have been proposed. Here we construct C ¹ continuous, eighth and ninth order interpolation methods for a recently appeared RK pair of orders 9(8). These interpolants share a very small leading truncation error making them suitable for use at quadruple precision, i.e. 32–33 decimal digits of accuracy. Extended numerical results justify our effort.     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

基于优化探测窗口的光斑质心探测方法

哈特曼-夏克波前传感器进行波前探测时，用子孔径光斑强度的一阶矩来计算光斑质心位置，子孔径窗口作为探测窗口，但探测时子孔径窗口内噪声对一阶矩有很大的影响，会使质心探测精度产生很大的误差。因此在计算质心位置时探测窗口的选取对探测精度有重要影响，必须选取合适的探测窗口来提高光斑质心探测精度。为此，在传统算法的基础上提出优化探测窗口的方法来提高质心探测精度,仿真和实验结果表明新方法提高了质心探测的精度，未经处理的高噪声恢复波前的波前残差峰谷值是2.851 4λ，均方根值是0.606 3λ，优化探测窗口后波前残差的峰谷值是1.636 2 λ，均方根值是0.367 1 λ，重构误差减小了40％。证明了算法的可行性和稳定性。     

Application of heat flow calorimetry to the study of oilwell cements

The majority of previous studies of the hydration of cements using heat flow calorimetry have been carried out isothermally. However, with oilwell cements the slurry is mixed on the surface at ambient temperature and then gradually increases in temperature as it is pumped down the well. A Setaram C-80 calorimeter has been used to simulate the temperature ramp in API oilwell cement test schedules. This approach has enabled cementing reactions to be studied for the first time under conditions approaching those encountered in the field, and has shown that the results obtained from isothermal experiments may be misleading.The permission of the British Petroleum Company PLC to publish this paper is gratefully acknowledged.