Comparison of the Kerr effect and X-ray pole figure methods for determining crystallographic texture in PrFeB magnets

In this study, magnetic domains in Pr₁₆Fe₇₆B₈ sintered magnets have been observed by Kerr effect and a histogram of the angular distribution of domain orientations has been used to determine the magnetic texture (cos Φ). The degree of easy-axis alignment of Pr₂Fe₁₄B matrix grains in these magnets has been also determined by X-ray pole figure analysis using the (0 0 4) reflection. The (0 0 4) pole figure measurements were carried out by the Schultz's reflection method. The (0 0 4) normalized intensity data has been fitted for a Gaussian distribution and the degree of crystal alignment, cos Θ, has been calculated using the Stoner–Wohlfarth model. Comparison of these methods has been carried out. It has been shown that in magnets with medium and high degrees of crystallographic alignment, the pole figure values are higher than that obtained by the Kerr effect method. Conversely, in magnets with low degrees of alignment, cos Θ is lower than cos Φ.     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

TEXTURE AND CRYSTALLINITY EVOLUTION IN ISOTACTIC POLYPROPYLENE INDUCED BY ROLLING AND THEIR INFLUENCE ON MECHANICAL PROPERTIES

The orientation and crystallinity evolution of isotactic polypropylene （iPP） induced by rolling were studied using wide angle X-ray scattering with an area detector. The tensile mechanical properties of rolled isotactic polypropylene sheets were also measured in this work. The texture component method was used to analyze the rolling texture. The rolling texture consists mainly of （010）[001], （130）[001] and [001]//RD fiber components in the sample with a rolling true strain of 1.5. The results reveal that crystallinity drastically decreases during rolling. It is suggested that amorphization is a deformation mechanism which takes place as an alternative to crystallographic intralamellar slip depending on the orientation of the lamellae. Both the orientation and crystallinity affect the tensile mechanical properties of rolled polypropylene. Crystallinity influences the elastic modulus on both directions and yield strength on transverse direction at the first stage of deformation. Orientation is the main reason for the changes of mechanical properties, especially at the latter part of deformation. The changes of both tensile strength and elongation percentage on rolling direction are larger than those on transverse direction, which results from the orientation. At last, the anisotropic mechanical properties occur on the rolling and transverse direction： high tensile strength with low elongation percentage on rolling direction and low tensile strength with high elongation percentage on transverse direction.     

电沉积条件对锌镀层织构的影响

采用ＸＲＤ方法研究添加剂，络合剂，以及电流密度对锌酸盐镀锌层的织构和晶粒尺寸的影响，结果表明，添加剂ＡＡ－１的存在有利于（１０１）晶面取向；而ＤＩＥ则使镀层转变为１１０择优；两种添加剂同时存在下，可在一定的电流密度范围内获得高择优取向的锌镀层，而当又有络合剂ＴＥＡ和ＥＤＴＡ同时存在时，则可在更宽广的电流密度范围内制得日 粒细密、表面光亮、择优系数ＴＣ（１１０）在９８５以上的高择优取向锌沉积层。     

Magnetic field effects on the crystal orientation and surface morphology of electrodeposited iron films

The effects of a magnetic field (5 T) on crystal orientation and surface morphology were investigated for iron films electrodeposited in ferrous aqueous solution. XRD measurements for the iron films showed that the preferred orientation parallel to the substrate was determined by the current density and not influenced by the magnetic field. By X-ray pole figure measurements, however, the crystal texture of the iron films electrodeposited at 10 mA cm^–2 and 30 mA cm^–2 was found to be controlled by the magnetic field. That is, the (110) planes were orientated in same direction of the magnetic field vector at angles of 30° and 35° to the direction normal to the substrate plane at 10 mA cm^–2 and 30 mA cm^–2, respectively. When the morphology was observed by SEM, iron grains at 30 mA cm^–2 changed from a triangular pyramid shape at 0 T to a complex star-like shape at 5 T.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

纤维素胆甾型液晶研究进展

主要介绍了近年来在纤维素胆甾型液晶领域的研究进展,包括其制备：形成机理、织构特性及其影响因素等方面。     

基于离散余弦变换和支持向量机的多光谱纹理图像的茶叶分类研究

提出一种利用多光谱图像纹理特征进行茶叶分类的新方法。图像由MS3100-3CCD光谱成像仪获得,光谱成像仪提供近红外(NIR)、红色(R)和绿色(G)的3个波段的图像。首先对原图像的NIR波段图像提取均方值,然后应用离散余弦变换算法,构造出8个带通和高通滤波器对NIR通道的图像进行滤波并提取均方差值,最后应用支持向量机技术,分别对原图像的NIR提取的均方差值和用8个滤波器滤过的图像提取的均方差值进行建模。茶叶样本总共为240个,训练和预测各为120个,每种训练样本和预测样本各为20个。结果表明经过8个滤波器处理图像的识别率为100%,而没有经过滤波处理的纹理图像识别率只有73.33%,说明离散余弦变换算法设计的滤波器是一种非常有效的纹理识别技术,此实验同时也为茶叶的分类提供一种快速和无损的新方法。     

Structural and Catalytic Activity of V2O5-Supported on AlPO4 Catalysts

Summary. A series of AlPO₄-V₂O₅ (APV) systems with various vanadia amounts 1–30mol% were prepared by the impregnation method and calcinated at 400 and 600°C for 4h. The catalysts were characterized by TG/DTG, DSC, IR spectroscopy, XRD, N₂ adsorption, and electrical conductivity measurements. The surface acidity and basicity of the catalysts were studied by the dehydration-dehydrogenation of isopropyl alcohol and the adsorption of pyridine. The catalytic gas phase esterification of acetic acid with ethyl alcohol was carried out at 210°C in a flow system at 1atm using air as a carrier gas. The results showed that the catalysts calcinated at 400°C were active and selective towards the formation of ethyl acetate whereas the calcination of samples at 600°C led to a drastic reduction in both activity and selectivity. Good correlations were obtained between catalytic activities towards ester formation and acidity of the prepared catalysts.     

Magnetic alignment in nominally non-magnetic hexagonal metal hydrides: NMR

Powders of three hexagonal metal-hydrides or -deuterides are found to align in 4.4–8.3 T magnetic fields used for NMR. The field-alignment is unexpected, since all three systems have very small susceptibilities, as demonstrated by sharp NMR lines. The extent of alignment runs from nearly complete to barely detectable in ZrBe₂(H,D)_x, LuD₃, and YD₃, respectively. The preferred alignment direction in ZrBe₂(H,D)_x is with the crystallites’ c-axis perpendicular to B, while the c-axis and B tend to be parallel in LuD₃ and YD₃. The susceptibilities χ_|| and χ are determined from bulk magnetization measurements in aligned ZrBe₂H_1.4 powder. The alignment must be considered for proper analysis of NMR spectra in these and related materials.     

Low silicon non-grain-oriented electrical steel: Linking magnetic properties with metallurgical factors

Commercial supply, from several steel manufacturers, of low-silicon non-grain-oriented electrical steel was monitored over a span of several years. A total of 51 samples were selected—selected from many hundreds on the basis of large differences in magnetic properties, but absence of significant variations in chemistry (other than differences in silicon percentage). The selected samples were analyzed for crystallographic texture and for grain size.