应力对M-Z型InP/InGaAsP-EAM偏振

采用Agilent 81910A光子全参量测试仪,首次实验研究了InP/In1－xGaxAs1－yPy-MQW（Multiple-Quantum-Well,MQW）材料与衬底间因应力而产生的M-Z型光调制器的PDL影响以及由此引起的由差分群时延(Differential Group Delay,DGD)表征的偏振模色散(Polarization Mode Dispersion,PMD).研究结果表明,半导体MQW光调制器的PDL与DGD是一致的.因此在半导体光器件的制作过程中,应尽可能地减小衬底与波导芯层之间的因残存应力的存在造成对光器件的高速性能的不利影响.     

Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

〈I〉型三角剖分下非张量积连续小波基的构造

多维非张量积小波是近年小波研究领域中的热点问题之一 ,它们与多维张量积小波相比具有更多的优势 .关于高维张量积、非张量积小波 ,目前已有一些很好的工作 (见文[2 ] [3 ] [4 ] ) ,但关于样条小波 ,还有许多问题有待于研究 .本文针对〈I〉型三角剖分下的二维线性元空间 ,讨论其具有紧支集和对称性的半正交样条小波基 .给定 x1 x2 平面上的〈I〉型三角剖分 (图 1 ( a)所示 ) ,记 j=( j1 ,j2 ) ,| j| =j1 + j2 ,πm= { 0≤ |j|≤ mCj1j2 xj11 xj22 ,Cj1,j2 是任意实数 }为次数不超过 m的代数多项式全体 .引入剖分尺度为 1的线性元空间 V0…     

The influence of pulse duration on the stress levels in ablation of ceramics: A finite element study

We present a finite element model to investigate the dynamic thermal and mechanical response of ceramic materials to pulsed infrared radiation. The model was applied to the specific problem of determining the influence of the pulse duration on the stress levels reached in human dental enamel irradiated by a CO₂ laser at 10.6 μm with pulse durations between 0.1 and 100 μs and sub-ablative fluence. Our results indicate that short pulses with durations much larger than the characteristic acoustic relaxation time of the material can still cause high stress transients at the irradiated site, and indicate that pulse durations of the order of 10 μs may be more adequate both for enamel surface modification and for ablation than pulse durations up to 1 μs. The model presented here can easily be modified to investigate the dynamic response of ceramic materials to mid-infrared radiation and help determine optimal pulse durations for specific procedures.     

Stress concentration and effective stiffness of aligned fiber reinforced composite with anisotropic constituents

The paper addresses the problem of calculation of the local stress field and effective elastic properties of a unidirectional fiber reinforced composite with anisotropic constituents. For this aim, the representative unit cell approach has been utilized. The micro geometry of the composite is modeled by a periodic structure with a unit cell containing multiple circular fibers. The number of fibers is sufficient to account for the micro structure statistics of composite. A new method based on the multipole expansion technique is developed to obtain the exact series solution for the micro stress field. The method combines the principle of superposition, technique of complex potentials and some new results in the theory of special functions. A proper choice of potentials and new results for their series expansions allow one to reduce the boundary-value problem for the multiple-connected domain to an ordinary, well-posed set of linear algebraic equations. This reduction provides high numerical efficiency of the developed method. Exact expressions for the components of the effective stiffness tensor have been obtained by analytical averaging of the strain and stress fields.     

Letter: Differential Invariants of the Kerr Vacuum

The norms associated with the gradients of the two non-differential invariants of the Kerr vacuum are examined. Whereas both locally single out the horizons, their global behavior is more interesting. Both reflect the background angular momentum as the volume of space allowing a timelike gradient decreases with increasing angular momentum becoming zero in the degenerate and naked cases. These results extend directly to the Kerr-Newman geometry.     

Polynomial Quantization on Rank One Para-Hermitian Symmetric Spaces

We construct the polynomial quantization on the space G/H where G=SL(n,R),H=GL(n–1,R). It is a variant of quantization in the spirit of Berezin. In our case covariant and contravariant symbols are polynomials on G/H. We introduce a multiplication of covariant symbols, establish the correspondence principle, study transformations of symbols (the Berezin transform) and of operators. We write a full asymptotic decomposition of the Berezin transform.     

Probability relations involving several subsystems

We consider the question of factorizability in tensor product spaces, and argue that the correlations associated with entangled states are even more problematic in the general case involving any tensor product of Hilbert spaces, than in the Einstein, Podolsky, and Rosen case with only two [1].     

物质纯重力场部分的能量-动量张量研究

认为物质的质量(能量)存在形式可分为两部分，一部分是以纯物质形式存在的，另一部分是以纯重力场形式存在的.物质质量(能量)这两种形式各自对应着相应的能量 动量张量，物质总的能量-动量张量可表示为Tμν=T(Ⅰ)μν+T(Ⅱ)μν,这里，T(Ⅰ)μν，T（Ⅱ）μν分别代表物质纯物质部分和纯重力场部分的能量-动量张量.通过类比电磁理论，定义：ωμ≡-c2gμ0/g00,并引入一个反对称张量Dμν=ωμ/xν-ων/xμ，则物质纯重力场部分的能量-动量张量为T(Ⅱ)μν=(DμρDρν-gμνDαβDαβ/4 关键词： 能量-动量张量 纯重力场 重力场方程 标量重力势 矢量重力势