Span 80 effect on the solvent extraction for heavy oil recovery

In this study, we used the Span 80 to enhance solvent extraction process, and we explored the mechanism. The results indicated different solvents would obtain different oil recovery, and toluene showed the optimal oil recovery, and the n-heptane showed the lowest oil recovery. The complex solvents could improve oil recovery. Toluene could make the heavy oil show the lowest viscosity (89.6 Pa.S), and n-heptane make the heavy oil show the highest viscosity (176.3 Pa.S). Complex solvents could decrease the heavy oil viscosities. The higher C/H was, the higher heavy oil recovery was, and when the asphaltene and resins content increase, the C/H would increase. The C/H showed the highest value (9.09, by toluene) and the lowest value (8.15). In this study, Span 80 could increase heavy oil C/H ratio, decrease heavy oil viscosity. Span 80 could make the sands surface more hydrophilic, and then the solvent loss would decrease. The oil recovery was high after 10 times recycle use.     

An analytical comparison of students’ reasoning in the context of Inquiry-Oriented Instruction: The case of span and linear independence

In this report we analyze differences in reasoning about span and linear independence by comparing written work of 126 linear algebra students whose instructors received support to implement a particular inquiry-oriented (IO) instructional approach compared to 129 students whose instructors did not receive that support. Our analysis of students’ responses to open-ended questions indicated that IO students’ concept images of span and linear independence were more aligned with the formal concept definition than the concept images of Non-IO students. Additionally, IO students exhibited more coordinated conceptual understandings and used deductive reasoning at higher rates than Non-IO students. We provide illustrative examples of systematic differences in how students from the two groups reasoned about span and linear independence.     

Extraction of strontium ions with emulsion liquid membrane technique

The aims of this study are to form a liquid membrane suitable for the extraction of strontium ions from aqueous solutions and to determine the factors influencing the stability of the membrane, the extraction efficiency and the rate of transport. The suggested membrane is composed of kerosene, Span 80 and D2EHPA. It has been observed that the extraction efficiency and the rate of transport increase with increasing ratio of emulsion to outer phase volume, stirring rate and D2EHPA concentration and decreasing pH of the inner phase. As the strontium ion concentration in the outer phase increases, the transport rate increases but the separation efficiency decreases. The maximum separation efficiency achieved in the experiments was 92%.     

Cationic liposomes modified with non-ionic surfactants as effective non-viral carrier for gene transfer

A defined change in formulation components affects the physical and chemical characteristics of cationic liposomes (CLs) carriers in many ways. Therefore, a great degree of control can be exercised over the structure by modifying the CLs with various materials, leading to new innovations for carrier improvement. In the present study, surface modifications of cationic liposomes with non-ionic surfactants—sorbitan monoesters serials (Span 85, 80, 40 and 20) were carried out for developing a new gene transfer carrier. Span modified cationic liposomes (Sp-CLs) were prepared by reverse phase evaporation method (RPV) and self-assemble complexes of antisense oligonucleotides/surfactant modifying cationic liposomes were prepared by auto-coacervation through electrostatic effect. Characterization of Sp-CLs and the self-assembled complex was performed by electron microscope, particle size, zeta potential, turbidity and agarose electrophoresis. Furthermore, in vitro cellular uptake experiment showed that Span plays a role in enhancing the cellular uptake of encapsulated oligonucleotides mediated by Sp-CLs by the endocytosis-dependent route. CLs modified with Span 40 significantly facilitated the cellular uptake by COS-7 cells and HeLa cells; also showed some positive effect on gene expression. That suggests it is a potential non-viral carrier for efficient gene transfer.     

The interactions of metal extractant reagents: VI. Aggregation equilibria of Cyanex 302 and Span 80 in toluene solutions

The aggregation equilibria of the commercial extractant Cyanex 302 in toluene have been studied by vapor pressure osmometry (VPO) at different temperatures. The experimental data, treated both graphically and numerically by means of the CPMIN program, can be explained by assuming the formation of a dimer species of the active component bis(2,4,4-trimethylpentyl)thiophosphinic acid for which the aggregation constants have been determined at 28, 40 and 50°C. The influence of other components of the commercial reagent in the aggregation equilibria have also been considered. The interaction between Cyanex 302 and the non-ionic surfactant Span 80 in toluene has also been investigated by VPO and the experimental results interpreted by the formation of mixed species between both reagents.     

Pre-irradiation grafting of span 60-IAH onto polyethylene to improve dripping properties of water on polyethylene films

A reactive type dripping anti-condensation agent, Span 60-IAH, was grafted onto linear low density polyethylene (LLDPE) by β-ray pre-irradiation and reactive extrusion. Effects of total dose, monomer concentration and extrusion temperature and rate on the degree of grafting were studied in detail. It was shown that the optimum conditions for grafting were the extrusion temperature of 130–220°C, screw run speed of 90 rpm and total β-ray dose of 12.5 kGy. The structure of the LLDPE-g-(Span 60-IAH) (LS) was characterized by Fourier-transform infrared spectroscopy (FT-IR). The tensile properties and light transmission properties of extruded films were determined. The thermal behavior of the LS was investigated by using differential scanning calorimetry (DSC). Compared with pure LLDPE, the crystallization temperature (T_c) of LS increased about 3°C. Accelerated dripping properties of film samples were investigated. The dripping duration of the LS film and a commercial anti-fog dripping film at 60°C were 45 days and 17 days, respectively, indicating a significant improvement.     

Some constructions on the Hermitian surface

In the geometric setting of commuting orthogonal and unitary polarities we construct an infinite family of complete (q + 1)²–spans of the Hermitian surface , q odd. A construction of an infinite family of minimal blocking sets of , q odd, admitting PSL ₂(q), is also provided.      

Recent developments in manufacturing emulsions and particulate products using membranes

Membrane emulsification (ME) is a relatively new technique for the highly controlled production of particulates. This review focuses on the recent developments in this area, ranging from the production of simple oil-in-water (O/W) or water-in-oil (W/O) emulsions to multiple emulsions of different types, solid-in-oil-in-water (S/O/W) dispersions, coherent solids (silica particles, solid lipid microspheres, solder metal powder) and structured solids (solid lipid microcarriers, gel microbeads, polymeric microspheres, core-shell microcapsules and hollow polymeric microparticles). Other emerging technologies that extend the capabilities into different membrane materials and operation methods (such as rotating membranes, repeated membrane extrusion of coarsely pre-emulsified feeds) are introduced. The results of experimental work carried out by cited researchers in the field together with those of the current authors are presented in a tabular form in a rigorous and systematic manner. These demonstrate a wide range of products that can be manufactured using different membrane approaches. Opportunities for creation of new and novel entities are highlighted for low throughput applications (medical diagnostics, healthcare) and for large-scale productions (consumer and personal products).     

Acrylamide as cosurfactant and hydrotrope in the pseudoternary Span 80-Tween 85/isopar M/water emulsion/microemulsion forming system

The aim of this study was to investigate the effects of acrylamide on emulsification of the pseudoternary Span 80-Tween 85/isopar M/water system at 40 °C. It was revealed that acrylamide could act as a surface-active agent to decrease the isopar M/water interfacial tension, and as a hydrotrope to increase the aqueous solubility of Tween 85, and further remarkably influence the emulsification of the investigated pseudoternary Span 80-Tween 85/isopar M/water system. The surface-active role of acrylamide could reduce the minimal weight fraction of the mixture of Span 80 and Tween 85 in pseudoternary systems (X_ST) to form stable water-in-oil (W/O) emulsions when the weight fraction of acrylamide in the aqueous domain (X_AM) is below 0.1; while its hydrotropic role at high X_AM levels (>0.1) could drive more Tween 85 molecules to transfer into aqueous phase and slightly improved the minimal X_ST to form stable W/O emulsions, as compared to that of X_AM at 0.1. Moreover, under a given X_ST, the mean diameter of the droplet size distribution of the W/O emulsion remarkably decreased with the increase in X_AM; while the smaller droplets in the W/O emulsion systems at higher level of X_AM still coalesced rapidly when the compositions of the emulsion was slightly above the visually determined boundary between non-emulsion and stable emulsion regions.