19.6nm波长类氖锗X光激光光源理论模拟

 波长19.6nm的类氖锗X光激光适合作为诊断激光等离子体界面不稳定性的光源。用经过实验检验的系列程序对预-主短脉冲驱动类氖锗进行了系统的优化设计和理论分析。采用2%~3%的预脉冲强度，6~8ns的预-主脉冲时间间隔，在4×10¹³W/cm²功率密度驱动下, 波长19.6nm增益区的宽度可以超过60μm，增益区的维持时间可以达到90ps。对于16mm长的平板靶，增益系数可达11.8/cm；弯曲靶增益系数可达13.3/cm；单靶小增益长度积可达21.3，单靶就可以获得饱和增益。采用双靶对接，其小讯号增益可达38.4，可以获得深度饱和增益，能满足应用演示所需的X光激光光源。     

氯柱硼镁石在氯化镁水溶液中相转化平衡液相的红外光谱分析

采用差示FTIR光谱技术,研究了氯柱硼镁石在30℃下浓度为0.5,12和18％MgCl_2水溶液中溶解及相转化平衡饱和水溶液中硼氧配阴离子的FTIR光谱。给出了溶液中硼氧配阴离子的FTIR光谱振动频率的归属,515cm~(-1)为单和二硼氧配阴离子特征峰,630cm~(-1)为三硼氧配阴离子特征峰,550cm~(-1)为四硼氧配阴离子特征峰。对饱和水溶液中硼氧配阴离子的存在形式及其相互作用以及与相转化析出固相的关系进行了讨论。     

反相液体色谱中饱和醇保留行为的研究 Ⅰ.低碳醇保留行为与溶质分子结构的关系

本文从吸附-疏溶剂理论出发,根据热力学平衡观点,导出了一定固定相和流动相时,描述溶质保留行为与其分子结构关系的理论模型,并用之预测了饱和醇的保留值,获满意结果。从而表明本模型不但能用于同系物,而且亦可用于同分异构体及立体异构体保留行为的预测。     

Comments on the electronic properties of cyclopropane,cyclobutane, and cyclohexane

Spectral quantities of cyclopropane, cyclobutane, cyclohexane, and of several derivatives, have been calculated by a semiempirical all-valence electron SCF-CI MO method. In cyclopropane, HOMO is practically localized in the carbon-frame, and LVMO is purely so. In cyclobutane, these two MO's are based on C-H bonds, while cyclohexane holds an intermediate position. Despite the overall similarity-experimental and computed-of the spectra of these molecules, assignments are non-parallel. Like cyclopropane, cyclobutane can extend conjugation, but to a diminished degree; cyclohexane behaves in this respect like an acyclic alkane. An interpretation of this gradation, in terms of the nature of high-lying MO's, is proposed.     

Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.     

298.15K下Li2B4O7-H2O体系水蒸汽分压及渗透系数的等压测定和离子相互作用模型

在已有研究含硼体系的文献中仅考虑了硼酸根B4O7^-2或B(OH)4^-和H3BO3的存在，而对Li2B4O7-H2O体系具有多种硼物种聚合平衡体系的热力学性质的研究尚未见报道．本文用等压法研究了Li2B4O7-H2O体系于298．15K下浓度由稀到过饱和溶液的平衡气相蒸汽压及渗透系数．考虑了水溶液中多种硼物种的存在，以Pitzer方程为基础，建立了可描述该含硼体系的离子相互作用模型。     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Alkane isomers: presence in petroleum ether and complexity

The presence and absence of alkane isomers in petroleum and petroleum derivatives depend on the complexity of these structures. It was assumed that the more complex the structure is the less probable it is that that the molecule can be detected in any petroleum derivative. Complexity is a vague concept, which has not been defined in quantitative terms yet, and therefore there is no experimental method, which could be used to determine ‘complexity’. Mass spectrometry and infrared spectroscopy in combination with gas chromatography were used to identify the various structural isomers of alkanes in petroleum ether. The isomers were categorised in quantitative terms by using topological indices and linear discriminant analysis. It was found that alkanes possessing a more complex, highly branched structure are less probable to be detected in petroleum ether than isomers with a simpler backbone structure. It was proposed that the experimental ‘measure’ of the complexity of isomer_i should be proportional to 1/C_i , where C_i , denotes the concentration of isomer_i in a (primary) petroleum derivative.     

肝素非还原端饱和结构的紫外吸收研究及在肝素寡糖测序中的应用

为了进一步探讨非还原端饱和结构的肝素寡糖在UV 232 nm的吸收情况, 制备了4种饱和结构的肝素二糖, 并用离子对反相液相色谱/离子阱飞行时间质谱(RPIP-LC/MS-IT-TOF)光电二极管阵列检测器分析了它们在UV 232 nm的吸收情况. 分析结果表明, 饱和结构的肝素二糖在UV 232 nm的检出限为9 μg(S/N=10), UV 232 nm/UV 206 nm约为不饱和结构肝素二糖UV 232 nm的7%~40%. 结果还表明, 肝素二糖UV 232 nm的吸收强度受亚硫酸基团(SO₃^2?)影响较大. 另外, 通过比较不饱和结构的肝素/硫酸类肝素(Hep/HS)标样二糖发现, 含N-未取代葡萄糖胺(GlcNH₃⁺)基团的二糖在UV 232 nm的吸收值较低. 最后, 通过简单的UV检测方法, 结合 HNO₂(pH=4.0)裂解法和RPIP-LC/MS-IT-TOF分析, 简化了含GlcNH₃⁺肝素六糖的测序方法. 本研究为以后用 HNO₂(pH=1.5)裂解法对混合组分N-硫酸化的肝素寡糖结构序列分析提供了可能.     

锰原子的二步多光子与三步三光子共振电离研究

激光共振电离技术是痕量分析中的重要手段之一。文章以速率方程理论为基础,对锰原子的激光共振电离过程进行了分析,讨论了电离过程中各级激发光功率密度及激光作用时间对电离效率的影响;提出了根据所要求的电离效率和激光作用时间计算所需要的各激发光或电离激光的功率密度的方法;得到了饱和激发或饱和电离的规律及阈值条件。研究发现,在激光作用时间为10 ns时,锰原子饱和电离的激光强度阈值基本都在108 W·cm-2的量级,只有“1+1”双色双共振低三个量级;而“1+1”和“1+1+1”饱和激发的激光强度阈值则在102～103 W·cm-2量级;并且随着激光作用时间的增加,各过程的饱和激发和饱和电离的激光强度阈值将单调减少。