A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

ＳRN 1 反应及某些SET引发的链式反应的新进展

本文综述了近几年来 S_(RN)1反应及某些 SET 引发的链式反应的研宄进展。包括四方面,即有机杂环化合物的 S_(RN)1反应;在 S_(RN)1反应中作为亲核试剂的各种有机负离子;金属离子对 S_(RN)1反应的催化作用以及 S_(RN)1在合成应用方面的进展。     

SET‐LRP of acrylonitrile in ionic liquids without any ligand

Use of ionic liquids as reaction media was investigated in the design of an environmentally friendly single electron transfer‐living radical polymerization (SET‐LRP) for acrylonitrile (AN) without any ligand by using Fe(0) wire as catalyst and 2‐bromopropionitrile as initiator. 1‐Methylimidazolium acetate ([mim][AT]), 1‐methylimidazolium propionate ([mim][PT]), and 1‐methylimidazolium valerate ([mim][VT]) were applied in this study. First‐order kinetics of polymerization with respect to the monomer concentration, linear increase of the molecular weight, and narrow polydispersity with monomer conversion showed the controlled/living radical polymerization characters. The sequence of the apparent polymerization rate constant of SET‐LRP of AN was k_app ([mim][AT]) > k_app ([mim][PT]) > k_app ([mim][VT]). The living feature of the polymerization was also confirmed by chain extensions of polyacrylonitrile with methyl methacrylate. All three ionic liquids were recycled and reused and had no obvious effect on the controlled/living nature of SET‐LRP of AN. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Biomimetic design of amphiphilic polycations and surface grafting onto polycarbonate urethane film as effective antibacterial agents with controlled hemocompatibility

The synthetic polycations are ideal candidates as antimicrobial agents, because they resemble natural antimicrobial peptides, but to render hemocompatibility to these materials is a great challenge. Herein, we used 2‐(tert‐butyl‐aminoethyl) methacrylate (TBAEMA), to synthesize its homopolymer and pegylated random and diblock copolymers with polyethyleneglycol methacrylate (PEGMA, M_n = 360 Da) by single‐electron transfer–living radical polymerization (SET‐LRP). In the second step, the secondary amino groups in the precursor polymers were quaternized with iodomethane and bromohexane, to obtain three series of quaternized polymers. The antimicrobial properties of these quaternized polymers were evaluated against Escherichia coli (E. coli), by studying the minimum inhibitory concentrations (MICs) which ranged between 32 and 200 mg L^?1 and showed higher values for the quaternized random than the diblock copolymers. In addition to, we have also demonstrated the grafting of these polycations onto polycarbonate urethane film surfaces, which showed good killing efficacy against E. coli. Furthermore, the hemolysis of these materials was investigated against human red blood cells, which indicated that except the quaternized homopolymers that showed highest hemolysis, all other amphiphilic polycations exhibited very low hemolytic activity. Therefore, our designed materials with controlled structures and functionality, synthesized from cheaply available resources could serve as useful agents in the field of biomedicines and implantable materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3166–3176     

New Look into the Synthesis of Polyhalogenoarylphosphanes

The present study shows new aspects of the synthesis of polyhalogenoarylphosphanes. The sterically hindered anions Ph(R)P-Y^? (1a–c, Y = O, lone pair; R = Ph, Bu^t) have been used to show the complexity of the reaction between phosphorus nucleophiles and hexahalogenobenzenes or 9-bromofluorene (E3). The Ph(Bu^t)P-O^? (1a) anion reacts with hexachlorobenzene (E1), hexafluorobenzene (E2), or E3 to give Ph(R)P(O)X (4a–c, X = F, Cl, Br) with the release of the corresponding carbanion as a nucleofuge, followed by side reactions. In contrast, the lithium phosphides Ph(R)PLi (1b,c) react with hexahalogenobenzenes to give the corresponding diphosphanes 5a,b as the main product and traces of P-arylated products, i.e., Ph(R)P-C₆X₅ (10a,b, X = Cl, F). Unexpectedly, Ph(Bu^t)PLi (1b) reacts with an excess of 9-bromofluorene to give only halogenophosphane Ph(Bu^t)P-X.     

Single‐electron transfer‐living radical polymerization of oligo(ethylene oxide) methyl ether methacrylate in the absence and presence of air

The efficient Cu(0) wire‐catalyzed single‐electron transfer‐living radical polymerization (SET‐LRP) of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) in DMSO and binary mixtures of DMSO with H₂O is reported. Addition of 10–80% H₂O to DMSO resulted in an increase in the apparent rate constant of propagation ( ), corresponding to an increase in the polarity and extent of disproportionation. At higher H₂O content, decreases, and in H₂O is slightly lower than that in DMSO. This unexpected behavior was attributed to the physical inaccessibility of Cu(0) wire catalyst to the hydrophobic reactive centers of OEOMA and initiator which self‐assemble in H₂O into micellar aggregates and vesicles. This hypothesis was confirmed by the faster polymerization in H₂O than in DMSO during catalysis with Cu(0) nanoparticles generated by disproportionation of CuBr. SET‐LRP of OEOMA can be performed in protic and dipolar aprotic solvents in air by the addition of hydrazine hydrate. The polymerization exhibited no induction period and identical as in the degassed experiment, and led to polymers with narrow molecular weigh distribution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3110–3122     

Utilization of photocatalysts in decarboxylative coupling of carboxylic N-hydroxyphthalimide (NHPI) esters

Recently, the visible-light photoredox decarboxylative couplings of N-(acyloxy)phthalimides (NHPI esters) and its derivatives have become an efficient chemical transformation. Under visible light, the NHPI esters undergo a single-electron transfer (SET) process to afford the corresponding carbon or nitrogen radicals that participate in many chemical transformations. The photoredox decarboxylative couplings have been applied to achieve construction of an array of carbon–carbon and carbon–heteroatom bonds as well as the synthesis of carbocycles and heterocycles. This review categorises photocatalysts, discusses the application and catalysis mechanisms of NHPI esters, and details recent progress in this field.     

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(MMA‐co‐IEM)) and poly(benzyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(BnMA‐co‐IEM)), which were synthesized by Cu(0)‐mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by ¹H and ¹³C NMR, and FTIR spectroscopy and SEC. Both P(MMA‐co‐IEM) and P(BnMA‐co‐IEM) were functionalized with dibutylamine, octylamine, and (R)‐(+)‐α‐methylbenzyl‐amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA‐co‐IEM) was used for the fabrication of liquid core microcapsules via oil‐in‐water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 µm in diameter independent of the composition of copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2698–2705     

基于Si掺杂Sb2Te3薄膜的相变存储器研究

采用磁控三靶(Si，Sb及Te)共溅射法制备了Si掺杂Sb₂Te₃薄膜，作为对比，制备了Ge₂Sb₂Te₅和Sb₂Te₃薄膜，并且采用微加工工艺制备了单元尺寸为10μm×10μm的存储器件原型来研究器件性能.研究表明，Si掺杂提高了Sb₂Te₃薄膜的晶化温度以及薄膜的晶态和非晶态电阻率，使得其非晶态与晶态电阻率之比达到10⁶，提高了器件的电阻开/关比；同Ge₂Sb₂Te₅薄膜相比，16at% Si掺杂Sb₂Te₃薄膜具有较低的熔点和更高的晶态电阻率，这有利于降低器件的RESET电流.研究还表明，采用16at% Si掺杂Sb₂Te₃薄膜作为存储介质的存储器器件原型具有记忆开关特性，可以在脉高3V、脉宽500ns的电脉冲下实现SET操作，在脉高4V、脉宽20ns的电脉冲下实现RESET操作，并能实现反复写/擦，而采用Ge₂Sb₂Te₅薄膜的相同结构的器件不能实现RESET操作. 关键词： 相变存储器 硫系化合物 2Te₃薄膜')" href="#">Si掺杂Sb₂Te₃薄膜 SET/RESET转变