Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

平面交叉玻璃波导型微透镜阵列光学性能研究

介绍了平面交叉玻璃光波导型半球形微透镜阵列的制作方法.利用积分形式的光线方程式讨论了半球形微透镜的光学特性,得到了半球形微透镜的光线轨迹方程式和焦距表示式,理论结果与实验数据是一致的.     

Stable marker-particle method for the Voronoi diagram in a flow field

The Voronoi diagram in a flow field is a tessellation of water surface into regions according to the nearest island in the sense of a “boat-sail distance”, which is a mathematical model of the shortest time for a boat to move from one point to another against the flow of water. The computation of the diagram is not easy, because the equi-distance curves have singularities. To overcome the difficulty, this paper derives a new system of equations that describes the motion of a particle along the shortest path starting at a given point on the boundary of an island, and thus gives a new variant of the marker-particle method. In the proposed method, each particle can be traced independently, and hence the computation can be done stably even though the equi-distance curves have singular points.     

Tracing of interference fringes using average gray value and simultaneous row and column scan

An algorithm for computer tracing of interference fringes is reported. The method uses the average gray-level value for thresholding, row and column scans for determining the type of the scan and simultaneous row and column scan for tracing. The proposed method yield good result even for low-contrast and high-noise images. The program for the interferogram tracing was written using MATLAB6.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Reactions of Chlorosulfanyl Derivatives of Cyclobutanones with Different Nucleophiles

The reactions of 3‐chloro‐3‐(chlorosulfanyl)‐2,2,4,4‐tetramethylcyclobutan‐1‐one ( 2 ) with N, O, S, and P nucleophiles occur by substitution of Cl at the S‐atom. Whereas, in the cases of secondary amines, alkanols, phenols, thiols, thiophenols, and di‐ and trialkyl phosphates, the initially formed substitution products were obtained, the corresponding products with allyl and propargyl alcohols undergo a [2,3]‐sigmatropic rearrangement to give allyl and allenyl sulfoxides, respectively. Analogous substitution reactions were observed when 3‐chloro‐3‐(chlorodisulfanyl)‐2,2,4,4‐tetramethylcyclobutan‐1‐one ( 3 ) was treated with N, O, and S nucleophiles. The reaction of 3 with Et₃P led to an unexpected product via cleavage of the S? S bond (cf. Scheme 13). In the reactions of 2 with primary amines and H₂O, the substitution products react further via elimination of HCl to yield the corresponding thiocarbonyl S‐imides and the thiocarbonyl S‐oxide, respectively. Whereas the latter could be isolated, the former were not stable but could be intercepted by MeOH (Scheme 4) or adamantanethione (Scheme 5). The structures of some of the substitution products were established by X‐ray crystallography.