平面交叉玻璃波导型微透镜阵列光学性能研究

介绍了平面交叉玻璃光波导型半球形微透镜阵列的制作方法.利用积分形式的光线方程式讨论了半球形微透镜的光学特性,得到了半球形微透镜的光线轨迹方程式和焦距表示式,理论结果与实验数据是一致的.     

Stille Cross‐Coupling of a Racemic Planar‐Chiral Ferrocene and Crystallographic Trace Analysis of Catalysis Intermediates and By‐products

A pressure‐controlled procedure for the S_N1 reaction of rac‐1‐[(dimethylamino)methyl]‐2‐(tributylstannyl)ferrocene ( 1 ) to rac‐1‐(phthalimidomethyl)‐2‐(tributylstannyl)ferrocene ( 2 ) was developed. Pd⁰‐Catalyzed Stille coupling of 2 with iodobenzene afforded rac‐1‐phenyl‐2‐(N‐phthalimidomethyl)ferrocene ( 5 ) in 74% yield; after trace enrichment by crystallization of the combined mother liquors, one single crystal of each, 5 , catalysis intermediate trans‐iodo(σ‐phenyl)bis(triphenylarsino)palladium(II) ( 7 ), trans‐diiodobis(triphenylarsino)palladium(II) ( 8 ), and rac‐2,2′‐bis(phthalimidomethyl)‐1,1′‐biferrocene ( 9 ) could be isolated by crystal sorting under a microscope and characterized by X‐ray crystal structure analysis. Furthermore, 5 was deprotected to amine ( 11 ), which does even survive the Birch reduction to rac‐1‐(aminomethyl)‐2‐(cyclohexa‐2,5‐dienyl)ferrocene ( 12 ).     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Reactions of Chlorosulfanyl Derivatives of Cyclobutanones with Different Nucleophiles

The reactions of 3‐chloro‐3‐(chlorosulfanyl)‐2,2,4,4‐tetramethylcyclobutan‐1‐one ( 2 ) with N, O, S, and P nucleophiles occur by substitution of Cl at the S‐atom. Whereas, in the cases of secondary amines, alkanols, phenols, thiols, thiophenols, and di‐ and trialkyl phosphates, the initially formed substitution products were obtained, the corresponding products with allyl and propargyl alcohols undergo a [2,3]‐sigmatropic rearrangement to give allyl and allenyl sulfoxides, respectively. Analogous substitution reactions were observed when 3‐chloro‐3‐(chlorodisulfanyl)‐2,2,4,4‐tetramethylcyclobutan‐1‐one ( 3 ) was treated with N, O, and S nucleophiles. The reaction of 3 with Et₃P led to an unexpected product via cleavage of the S? S bond (cf. Scheme 13). In the reactions of 2 with primary amines and H₂O, the substitution products react further via elimination of HCl to yield the corresponding thiocarbonyl S‐imides and the thiocarbonyl S‐oxide, respectively. Whereas the latter could be isolated, the former were not stable but could be intercepted by MeOH (Scheme 4) or adamantanethione (Scheme 5). The structures of some of the substitution products were established by X‐ray crystallography.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Stereoselective and Enantioselective Syntheses of the Four Stereoisomers of Muscol from (3RS)‐Muscone

Two trans stereoisomers of 3‐methylcyclopentadecanol (=muscol), (1R,3R)‐ 2 and (1S,3S)‐ 2 , were efficiently synthesized from (3RS)‐3‐methylcyclopentadecanone (=muscone; (3RS)‐ 1 ) by a highly stereoselective reduction (Scheme). L‐Selectride^® (=lithium tri(sec‐butyl)borohydride) was used, followed by the enantiomer resolution by lipase QLG (Alcaligenes sp.). The cis stereoisomers of muscol, (1S,3R)‐ 2 and (1R,3S)‐ 2 , were obtained by the Mitsunobu inversion of (1R,3R)‐ 2 and (1S,3S)‐ 2 , respectively (Scheme). The absolute configuration of (1R,3R)‐ 2 was determined by X‐ray crystal‐structure analysis of its 3‐nitrophthalic acid monoester, 2‐[(1R,3R)‐3‐methylcyclopentadecyl hydrogen benzene‐1,2‐dicarboxylate ((1R,3R)‐ 3b ), and by oxidation of (1R,3R)‐ 2 to (3R)‐muscone.     

Reactions of α,β‐Unsaturated Thioamides with Diazo Compounds

Several reactions of the α,β‐unsaturated thioamide 8 with diazo compounds 1a – 1d were investigated. The reactions with CH₂N₂ ( 1a ), diazocyclohexane ( 1b ), and phenyldiazomethane ( 1c ) proceeded via a 1,3‐dipolar cycloaddition of the diazo dipole at the C?C bond to give the corresponding 4,5‐dihydro‐1H‐pyrazole‐3‐carbothioamides 12a – 12c , i.e., the regioisomer which arose from the bond formation between the N‐terminus of the diazo compound and the C(α)‐atom of 8 . In the reaction of 1a with 8 , the initially formed cycloadduct, the 4,5‐dihydro‐3H‐pyrazole‐3‐carbothioamide 11a , was obtained after a short reaction time. In the case of 1c , two tautomers 12c and 12c ′ were formed, which, by derivatization with 2‐chlorobenzoyl chloride 14 , led to the crystalline products 15 and 15 ′. Their structures were established by X‐ray crystallography. From the reaction of 8 and ethyl diazoacetate ( 1d ), the opposite regioisomer 13 was formed. The monosubstituted thioamide 16 reacted with 1a to give the unstable 4,5‐dihydro‐1H‐pyrazole‐3‐carbothioamide 17 .     

Terpenoids from Loxocalyx urticifolius

Two new diterpenoids, loxocalyxin A ( 1 ) and 13‐epiloxocalyxin A ( 2 ), and two new sesquiterpenoids, loxocalyxins B and C ( 3 and 4 , resp.), together with three known compounds, were isolated from the MeOH extract of the whole plant of Loxocalyx urticifolius Hemsl . The structures of the new compounds were established by means of spectroscopic analysis including one‐ and two‐dimensional NMR spectroscopy. All new structures were confirmed by X‐ray crystallographic analysis. Their absolute configurations were established.