The sintering of silica aerogels studied by thermoporometry

The evolution of the texture of silica aerogels during sintering is studied by thermoporometry for both neutral and base catalysed materials.During the densification the macroporous volume drops and the analysis of the mesopore size distribution evolution shows that the collapse of the smallest mesopores is responsible for the macropore volume transformation. However, corrections of the measured volumes are necessary to characterize the most compliant materials.     

杨氏双缝干涉实验的光谱变化

从理论和实验上研究了当部分相干光照射在双缝上时,杨氏双缝干涉实验干涉场中的光谱变化.指出干涉场中的归一化光谱在某些空间点处出现了蓝移,在另外一些空间点处出现了红移,而在这些空间点的中间,光谱分裂为等值的两条,出现了光谱开关现象.发现当观察点从轴上向轴外移动的过程中,在很多空间观察点处都出现了光谱开关现象.此外,研究结果还表明光谱相干度将对光谱的移动和光谱开关现象产生重要的影响.     

关于BCI逻辑的一种偏序代数

通常,人们认为Kiyoshi Iséki在20世纪60年代引入的BCI-代数是组合逻辑中BCI逻辑的代数对等物。然而这种广为人知的断言却是有问题的,因为BCI逻辑关于BCI代数是不完备的。在本文中,我们引入一种称为MPE的偏序代数。在MPE中的每个不等式对应BCI逻辑中的一个重言式且反之亦然,从而MPE代数是与BCI逻辑完备的代数类。     

低浓度部分水解聚丙烯酰胺/柠檬酸铝交联体系剪切稳定性研究

采用粘度法、核孔膜过滤和动态光散射(DLS)法,研究了高分子量低浓度的部分水解聚丙烯酰胺(HPAM)与柠檬酸铝(AlCit)反应所形成的交联体系的剪切稳定性和HPAM剪切降解后与AlCit反应所形成的体系的封堵性能及降解机理.研究结果表明,低浓度的HPAM与AlCit反应所形成的交联聚合物体系随剪切速率增加,其对1.2μm的核孔膜的封堵能力降低.HPAM稀溶液剪切降解后再与AlCit反应,低剪切速率对其封堵性能影响较小,而高剪切速率会使得其封堵性能大大降低.HPAM/AlCit交联体系和HPAM剪切降解后形成的交联体系的封堵性能下降的原因是HPAM/AlCit交联体系中交联聚合物线团(LPC)尺寸和HPAM中高分子线团的尺寸变小.     

Propagation of phase-locked partially coherent flattened beam array in turbulent atmosphere

Analytical formulae for phase-locked partially coherent flattened beam array propagating in a turbulent atmosphere are derived based on the extended Huygens–Fresnel principle. Beam propagation factor (BPF) is introduced to evaluate the beam quality at the receiving plane. The influence of beam order, transverse coherence width length and the intensity of turbulence is discussed in detail.     

Screening of aromatase inhibitors in traditional Chinese medicines by electrophoretically mediated microanalysis in a partially filled capillary

An electrophoretically mediated microanalysis method with partial filling technique was developed for screening aromatase inhibitors in traditional Chinese medicine. The in‐capillary enzymatic reaction was performed in 20 mM sodium phosphate buffer (pH 7.4), and sodium phosphate buffer (20 mM, pH 8.0) was used as a background electrolyte. A long plug of coenzyme reduced β‐nicotinamide adenine dinucleotide 2′‐phosphate hydrate dissolved in the reaction buffer was hydrodynamically injected into a fused silica capillary followed by the injection of reaction buffer, enzyme, and substrate solution. The reaction was initiated with a voltage of 5 kV applied to the capillary for 40 s. The voltage was turned off for 20 min to increase the product amount and again turned on at a constant voltage of 20 kV to separate all the components. Direct detection was performed at 260 nm. The enzyme activity was directly assayed by measuring the peak area of the produced β‐nicotinamide adenine dinucleotide phosphate and the decreased peak area indicated the aromatase inhibition. Using the Lineweaver–Burk equation, the Michaelis–Menten constant was calculated to be 50 ± 4.5 nM. The method was applied to the screening of aromatase inhibitors from 15 natural products. Seven compounds were found to have potent AR inhibitory activity.     

The heterogeneous distribution of the liquid phase in partially filled porous glasses and its effect on self-diffusion

The spatial distribution of the liquid phase in a typical, partially filled, porous glass (VitraPor #5) has been examined with the aid of magnetic resonance microscopy and field gradient nuclear magnetic resonance diffusometry techniques. The correlation length of the material turned out to be long enough to permit the visualization of the microscopic heterogeneity of the material by magnetic resonance imaging. Contrasts are dominated by transverse relaxation depending on local filling degree, which in turn depends on local microstructure. The bimodal heterogeneity of the latter was also visualized by scanning electron microscopy. The effect of heterogeneity on an effective diffusion coefficient has been examined for polar (water) and nonpolar (cyclohexane) molecules.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.