One step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals in an ionic liquid

Investigation of one step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals has been carried out using versatile aldehydes, tri- or di-fluoroacetaldehyde ethyl hemiacetal in the presence of diethylaminotrimethylsilane (DEATMS) in an ionic liquid, and it was demonstrated that this route enabled us to successfully construct 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals with the high level selectivity of geometric isomers.     

p-Laplace方程正解的存在性和多重性

这篇文章讨论边值问题-(| u′|p-2u′)′=λf(t ,u) ,t∈(0,1) ,p >1,u(0) =u(1) =0,其中f(t ,u)≥-M( M是正常数) ,对(t ,u)∈0,1×0,∞) .我们利用度理论和锥上的不动点定理得到方程存在两个正解.     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

2,3,7‐Triazabicyclo[3.3.0]octenes Prepared by Tandem Cascade Reaction of Allyl Azides and Olefinic Dipolarophiles

Tandem cascade reactions of allylazides and olefinic dipolarophiles to give cis‐fused 2,3,7‐triazabicyclo [3.3.0]octenes ( 5, 6 or 7 ) are reported. Therein, an intermolecular dipolar cycloaddition of azide and alkene gave a triazoline which was followed by isomerization of the triazoline to a diazoester ( 4 ) and then an intramolecular dipolar cycloaddition from the diazo functional group and the double bond in 4 to give 5 . Compound 5 may further more undergo a Michael addition to give 7‐substituted‐ 2,3,7‐ triazabicyclo [3.3.0]oct‐2‐ene ( 6 ) or a tautomerization to give 2,3,7‐triazabicyclo[3.3.0]oct‐3‐ene ( 7 ). The reaction may be manipulated to stop at a particular stage by adopting a suit able solvent or an appropriate temperature.     

Three‐Component One‐Pot Synthesis of 1,4‐Dihydropyrano[2,3‐c]pyrazole Derivatives in Aqueous Media

Abstract

6‐Amino‐5‐cyano‐4‐aryl‐1,4‐dihydropyrano[2,3‐c]pyrazoles were synthesized by three‐component reaction of aromatic aldehydes, malononitrile, and 3‐methyl‐1‐phenyl‐2‐pyrazolin‐5‐one using triethylbenzylammonium chloride (TEBA) as catalyst in aqueous media. The reaction has the advantages of good yield, less pollution, ease of separation, and of being environment friendly.     

One‐Pot Synthesis of 2‐Amino‐4‐aryl‐3‐carbalkoxy‐7,7‐dimethyl‐5,6,7,8‐tetrahydrobenzo[b]pyran Derivatives Catalyzed by KF/Basic Al2O3 Under Ultrasound Irradiation

Abstract

Synthesis of 2‐amino‐4‐aryl‐3‐carbalkoxy‐7,7‐dimethyl‐5‐oxo‐5,6,7,8‐tertrahydrobenzo[b]pyran derivatives was carried out in 81–98% yields by one‐pot condensation of aromatic aldehydes with cyanoacetic esters and 5,5‐dimethyl‐1,3‐cyclohexanedione catalyzed by KF/basic Al₂O₃ at room temperature under ultrasound irradiation.     

ADSORPTION OF SURFACE-ACTIVE AGENTS FROM AQUEOUS SOLUTION: HYDROPHOBIC SUBSTRATES∗

Isotherms for the adsorption of sodium dodecyl benzene sulfonate, sodium POE (4) nonyl phenol sulfate, and POE (25) nonyl phenol, on the hydrophobic crystalline herbicides atrazine and cyanazine were determined. Anionic surfactants were measured at 5°, 25°, and 50° C; the nonionic surfactant at 25° C only. Low degrees of surface coverage were observed; in only one case (atra-zine/NaDBS) was monolayer coverage approached. On the other hand, adsorption was accompanied by a significant increase in negative zeta potential. Although DLVO calculations suggest that this adsorption should lead to stable aggregates, these are of such size that gravitational effects overpower the DLVO terms.     

One pot synthesis of some new N-allyl and N-benzyl quinazolinones and their anti-inflammatory activity

The simple and more reliable one-pot synthesis of some novel compounds of allyl/Benzyl quinazolinone (4aa-4bd) with good yields from readily available derivatives of anthranilic acid and benzoyl chloride was also reported. Interestingly, as compared to Diclofenac sodium, compounds 4ac, 4ad, 4ba, 4bc and 4bd displayed remarkable anti-inflammatory activity (Scheme 1 & Table 2).     

一步水热合成铜纳米颗粒负载二氧化钛复合纳米管及其可见光催化活性

采用一步水热法合成了Cu纳米粒子负载二氧化钛纳米管材料. 利用透射电子显微镜(TEM)、X射线衍射仪(XRD)、能谱仪(EDS)等对材料的相组成、形貌以及形成过程进行了研究. 制得的Cu-TiO₂复合纳米材料长度约为100 nm, 直径10-15 nm, 其上负载的Cu纳米粒子尺寸约为5 nm. BET比表面积测试表明实验制备的Cu-TiO₂复合纳米管的比表面积为154.67 m²·g^-1. 通过调节水热反应时间和钛前驱体种类, 研究了该复合纳米管材料的形成机制. 结果表明: 非晶态的钛源对于成功一步合成Cu-TiO₂复合纳米管至关重要. 同时, 实验中观察到铜纳米粒子的尺寸随水热反应时间延长而减小(反奥氏陈化过程), 这一现象有助于纳米粒子的可控合成.紫外-可见吸收光谱表明该复合纳米管在350-800 nm范围内有较强的吸收, 并在550-600 nm范围观察到Cu的表面等离子激元吸收带. Cu-TiO₂界面处形成的肖特基势垒有助于加快光生载流子的输运, 提高光生电子-空穴对的分离效率. 光催化实验表明Cu-TiO₂复合纳米管在可见光下具有较高的催化活性.