光码分多址系统中光学相关接收机判决阈值的分析

介绍了光码分多址系统中常用地址码（一维扩时码、二维码和三维码）的特点，并对它们各自的互相关均值和方差进行了理论分析。基于非相干光码分多址系统中光学相关接收机的基本原理，结合不同的用户地址码，对系统误码率性能进行了分析，得到了接收机最佳判决阈值与地址码基本特性参数和系统同时用户数间的关系。最后，给出了数值仿真结果。结果表明，对于采用特定地址码的光码分多址系统，只有选择合适的接收机判决阈值，系统的误码率性能才能达到最佳。研究结果对光码分多址系统中接收机判决阈值的选取具有一定的参考作用。     

Performance Enhancement for Optical Fast Frequency-hopping CDMA Systems by BCH Channel Coding

In this paper, the impact of optical beat noise on the performance of optical fast frequency-hopping code-division multiple-access (FFH OCDMA) networks is analyzed. BCH/FFH-OCDMA to reduce the impact of optical beat noise is proposed. It is shown that, BCH/FFH-OCDMA has much better performance under the same bit rate, same chip time and same number of available wavelengths. Another advantage for BCH/FFH-OCDMA is that the code length of one-coincidence sequence will be shorter, which can greatly reduce the difficulty of fabrication for fiber gratings.     

一种跳频扩时码的构造及性能分析

以一维二次同余码(QCC)作为扩时模式，以光正交码(OOC)和QCC码作为频域跳频模式，通过时域和频域的组合，构造了适用于光码分多址(OCDMA)系统的QCC/QCC和QCC/OOC 2种跳频扩时码，并对码的容量及其相关性进行了分析。与一维QCC码相比，QCC/QCC跳频扩时码的容量扩大了p 1倍（p为码重），相关性得到改善，并且码字异相自相关限λa=1，互相关限λc=2；QCC/OOC跳频扩时码具有更大的码容量和更好的相关性，码字异相自相关限λa=0，所有码字按一定规律可分成p 1组（p为码重），每组内码字的互相关限λa=1，不同组间码字的互相关限λa=2。所得结果为光码分多址系统中跳频扩时码的构造提供了一种新的方法。     

Low-Loss Many-to-One Fiber Couplers with Few or Single-Moded Inputs and a Multi-Mode Output

The coupling of light from a number of few or single-moded fibers into a single multi-mode fiber is analyzed using geometric optics, and simple results demonstrating mode conservation are derived. Coupling from multiple single-mode fibers into a multi-mode fiber is investigated in detail using the overlap integral to determine coupling into each mode of the output fiber as a function of the light phase in the inputs. As well as results with practical relevance to fiber tapped delay-line filters and optical CDMA, the analysis provides pedagogic insight into light propagation and the light-gathering properties of fiber.     

基于步进啁啾光纤光栅的OCDMA频阈相位编码

本文提出了一种在步进啁啾光纤光栅实现OCDMA频阈相位编码的方案,该方案中引入了影射码,根据影射码在相应的子光栅之间加入相移以实现正确的编解码.该编解码器结构简单,数值模拟得到了好的相关输出.     

Evaluation of coherent homodyne and heterodyne optical CDMA structures

This paper evaluates the coherent optical code-division multiple-access (OCDMA) techniques and examines the overall system performance in terms of signal-to-noise ratio (SNR) penalty as a function of simultaneous users accommodated to maintain an appropriate value of the bit-error rate (BER) for homodyne and heterodyne detections. As spreading codes, the proposed structures are utilizing a recently introduced prime code family hereby referred to as double-padded modified prime code (DPMPC). As a coherent modulation, binary phase-shift keying (BPSK) format is deployed. In homodyne detection, two different phase modulations are studied including either an external phase-modulator or injection-locking methods. The phase limitation and the performance for two methods plus multiple-access interferences (MAI) and receiver noise in a shot-noise limited regime are investigated. In heterodyne detection, BER analysis of the system based on only external phase modulator is examined. It is found that by maintaining BER = 10⁻⁹, this system can accommodate an increased number of simultaneous users to compare with systems which employ conventional bipolar codes.     

一种多波长OCDMA解码器方案及其性能分析

提出了一种多波长OCDMA（MW OCDMA）系统的光解码器方案,通过多个光硬限幅器来抑制多用户干扰.分析了使用该解码器的MW OCDMA误码率性能、频谱效率和归一化吞吐量性能.分析结果表明,该方案能有效改善MW OCDMA系统的误码率性能,在要求的误码率条件下增加同时用户数,从而能有效改善MW OCDMA系统的频谱效率.同时,采用光硬限幅器的MW OCDMA 系统的归一化吞吐量性能明显提高,特别是归一化吞吐量峰值提高了约一倍.     

OCDMA的一种新型码的构造及实现

提出了一种新型OCDMA多维码构造方案。该多维码是在一维EPC(扩展的素数码)时域码的基础上,对其进行PC(素数码)跳频编码,并加上了偏振信息。然后通过偏振片和FBG(布拉格光线光栅)实现这种码的编解码,详述了其特点,最后描述了使用该地址码进行信息传输的OCDMA系统结构。计算表明该新型地址码具有更大的容量,能容纳更多的用户同时通信。     

一种严格最佳(ν,k,1)光正交码的设计方法

介绍了严格最佳和准最佳(ν,k,1)光正交码的定义，阐述了它们与(ν,k,1)循环差集族的关系。基于Wilson均匀分布差引理和初等数论的基本理论，提出一种最佳(ν,k,1)循环差集族的构造方法，即构造定义在ν阶有限域上满足特定约束条件的k元集合。将该方法用于光正交码的设计中，可以有效地设计一些严格最佳(ν,k,1)光正交码，其中，码长ν为素数，码重k的取值为4、5和6。最后结合具体实例，给出严格最佳(ν,k,1)光正交码的计算机辅助设计方法。同其他设计方法相比，该设计方法既简单又实用，尤其对严格最佳（ν,k,1）光正交码而言，设计效率较高；随着码重k的增加，码的设计效率逐渐降低。     

用遗传算法构造光正交码

提出了一种利用遗传算法构造任意码长、码重、自相关限、互相关限光正交码(GA-OOC)的方法,设计了新的码字矩阵;分析了基于GA-OOC的光CDMA系统的误码率性能。仿真结果表明:该算法具有构造算法简单、易于编程实现的特点;与基于PC,EPC,QC和BIBD-OOC的光码分多址系统相比,GA-OOC的光码分多址系统具有更好的误码率性能。GA-OOC有望用于构造二维光地址码。