扩宽OMA-Ⅵ同时谱宽的新方法

OMA－Ⅵ存在同时谱宽窄的缺点，本文用一种新方法大幅度地扩宽了它的同时谱宽，且不降低其系统分辨率，应用效果甚佳。     

全固态多波长飞秒脉冲激光系统

利用棱镜对引进频谱空间啁啾来补偿飞秒脉冲激光二次谐波产生中的相位失配,提高了倍频效率建立了一套全固态、多波长(1065nm, 532nm,823.1nm, 402nm)飞秒脉冲激光系统自制的Nd:YVO4激光器输出532nm绿光激光,最高平均功率可达5.6W当用2.5W绿光激光泵浦时,从自制的钛宝石激光器及经BBO倍频可分别输出中心波长为823.1nm和402nm,平均功率300mW和73mW,谱宽32.3nm和5.1nm,脉宽22fs和33.3fs、重复率108MHz的近红外和蓝光激光整个系统具有结构紧凑、倍频效率高、运行稳定的特点.     

利用GHZ态实现多原子缠结态的量子隐形传态(英文)

提出一种利用 GHZ态实现多原子缠结态的量子隐形传态方案 .当作为量子通道的 GHZ态含有一个单模高 Q腔时 ,大大地简化了量子稳形传态中的联合测量过程     

A Variable Neighborhood Search for the Multi Depot Vehicle Routing Problem with Time Windows

The aim of this paper is to propose an algorithm based on the philosophy of the Variable Neighborhood Search (VNS) to solve Multi Depot Vehicle Routing Problems with Time Windows. The paper has two main contributions. First, from a technical point of view, it presents the first application of a VNS for this problem and several design issues of VNS algorithms are discussed. Second, from a problem oriented point of view the computational results show that the approach is competitive with an existing Tabu Search algorithm with respect to both solution quality and computation times.     

“Optimization of aircraft maintenance/support infrastructure using genetic algorithms—level of repair analysis”

Level of repair analysis (LORA) is an approach used during the design stage of complex equipment for analysis of the cost effectiveness of competing maintenance strategies. LORA is carried as a part of the life cycle cost and cost of ownership analysis and plays a significant role in minimizing the life cycle cost and cost of ownership of the capital equipment. Since many purchasing decisions of complex equipment are based on cost of ownership, it has become essential to carry out LORA to compete in the market. In this paper, we develop a mathematical model for LORA and propose a solution methodology based on genetic algorithms. The concept is illustrated using a hypothetical aircraft engine.     

SEQUENTIAL QUADRATIC PROGRAMMING METHODS FOR OPTIMAL CONTROL PROBLEMS WITH STATE CONSTRAINTS

A Kind of direct methods is presented for the solution of optimal control problems with state constraints.These methods are sequential quadratic programming methods.At every iteration a quadratic programming which is obtained by quadratic approximation to Lagrangian function and Linear approximations to constraints is solved to get a search direction for a merit function.The merit function is formulated by augmenting the Lagrangian funetion with a penalty term.A line search is carried out along the search direction to determine a step length such that the merit function is decreased.The methods presented in this paper include continuous sequential quadratic programming methods and discreate sequential quadrade programming methods.     

Chiral separation of the four stereoisomers of a novel antianginal agent using a dual cyclodextrin system in capillary electrophoresis

Reported here is an analytical method enabling the stereochemical resolution of a new antianginal compound possessing two stereogenic centers, leading to four stereoisomers. Only one of these isomers is currently under development as a novel antianginal agent and consequently, the other three isomers are considered as unwanted chiral impurities. Therefore, an enantioselective method is required in order to check its enantiomeric purity. This paper presents a method exploiting the high efficiency of capillary electrophoresis and the complexing properties of cyclodextrins to achieve the separation of the four stereoisomers of this weakly basic compound (pKa = 7.4). For this purpose, the combination of a neutral cyclodextrin, hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD), and an anionic cyclodextrin, carboxymethyl-beta-cyclodextrin (CM-beta-CD), was added to the separation buffer running in an uncoated silica capillary. After selection of the suitable cyclodextrin system, satisfactorily separation conditions were as follows: 30 mM phosphate buffer (pH 6.4) containing 10 mM of HP-gamma-CD and 10 mM of CM-beta-CD, running voltage +30 kV. The resulting run time and resolutions were respectively about 17 min and between 1.95 and 2.84. Linearity curves (0.993 < r2 < 0.998) are also shown.     

A Family of Fifth-Order Runge-Kutta Pairs

The construction of a Runge-Kutta pair of order with the minimal number of stages requires the solution of a nonlinear system of order conditions in unknowns. We define a new family of pairs which includes pairs using function evaluations per integration step as well as pairs which additionally use the first function evaluation from the next step. This is achieved by making use of Kutta's simplifying assumption on the original system of the order conditions, i.e., that all the internal nodes of a method contributing to the estimation of the endpoint solution provide, at these nodes, cost-free second-order approximations to the true solution of any differential equation. In both cases the solution of the resulting system of nonlinear equations is completely classified and described in terms of five free parameters. Optimal Runge-Kutta pairs with respect to minimized truncation error coefficients, maximal phase-lag order and various stability characteristics are presented. These pairs were selected under the assumption that they are used in Local Extrapolation Mode (the propagated solution of a problem is the one provided by the fifth-order formula of the pair). Numerical results obtained by testing the new pairs over a standard set of test problems suggest a significant improvement in efficiency when using a specific pair of the new family with minimized truncation error coefficients, instead of some other existing pairs.

     

多相高分子快离子导体阻抗谱的研究

研究了以ＬｉＣｌＯ４掺杂的聚乙二醇聚氨酯双离子导体及磺酸型聚乙二醇聚氨酯离聚物单一离子导体的阻抗谱，给出了多相快离子导体交流阻抗测试系统的等效电路．通过阻抗谱计算机解析，计算得出了样品的基本电学参数．通过讨论界面阻抗的色散现象，计算出样品的离子电导率，和阻抗谱解析法得到的结果相一致．     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著