Predictive control of periodic-review production inventory systems with deteriorating items

In this paper a predictive control strategy is applied to a periodic-review dynamic inventory system with deteriorating items. Given the current inventory level, we determine the optimal production rates to be implemented at the beginning of each of the following periods over the control horizon. The effectiveness of this approach is the use of future information of the inventory target level and the desired production rate, which are available, along the fixed horizon. The deterioration coefficient may be known or unknown and both cases are considered. In the case where it is unknown, the self-tuning predictive control is applied. The proposed control algorithms are illustrated by simulations.     

Thermoanalytical characterization of carbon/carbon hybrid material, Apple Woodceramics

Woodceramics, a carbon/carbon composite of plant-originated carbon reinforced by glassy carbon from phenolic resin, was prepared from apple pomace at carbonizing temperatures of 1073 K (AWC800) and 1473 K (AWC1200), and characterized by thermoanalytical methods and X-ray diffraction (XRD). Simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) showed complicated overlapping reactions similar to those of coal. The initial temperature of pyrolysis was obtained by fitting logistic functions to observed TG data. The results suggested that AWC1200 contained more volatile matter than AWC800. In an inert atmosphere, complicated devolatilization takes place. In an oxidizing atmosphere, thermal change occurs roughly in four steps: desorption of physically adsorbed matter; pyrolysis into aliphatic and aromatic fragments; ignition; combustion of char. The oxidation resistance of AWC1200 was superior to AWC800.     

Study of the winter and summer changes of the air composition in the church of Szalowa, Poland, related to conservation

The St. Michael Archangel’s Church in Szalowa, Poland, was selected for closer investigation with respect to the indoor/outdoor air exchange and its influence on the air quality and work arts preservation. Chemical composition, size and abundance of particulate matter and concentration of gases NO₂, SO₂, O₃ inside and outside the church were determined. To study seasonal variation of the weather condition (temperature, inversion level, wind direction) and the influence of seasonal sources of the air pollution (like heating of the nearby houses), samples were collected in winter and summer time. It was stated that suspended particulate matter inside the wooden church has in general an outdoor source. Several groups of particles were distinguished such as the organic ones, soil dust, nitrates and sulphates. In case of organic and soil dust particles, the concentration inside was higher than outside. From the results, in comparison to literature data, one can conclude that accumulation of particulate suspended matter in the church is more intense than in other types of buildings. Gaseous pollutants were detected but their concentration was negligible.     

On the use of ‘shortcuts’ in the method of continuous variation (Job's method)

The use of modified Job plot methodology provides a quick and easy means for evaluating host–guest stoichiometry and requires less material than the original method. In this short paper, the results of a recent anion recognition study using thiourea-functionalised norbornanes and [n]polynorbornanes are presented. A significant difference between the plots constructed using the original and modified method was observed and, as such, caution is advised when the modified Job's method is solely used for the determination of host–guest stoichiometry.     

NMR spectroscopic investigation of inclusion complexes between cyclodextrins and the neurotoxin tetramethylenedisulfotetramine

The binding stoichiometry, strength and structure of inclusion complexes formed between the neurotoxin tetramethylenedisulfotetramine (TETS) and both native and modified cyclodextrins (CyDs) were investigated using nuclear magnetic resonance (NMR) spectroscopy. Of all six examined cases, native β‐cyclodextrin (β‐CyD) and its chemically modified counterpart heptakis‐(2,3,6‐tris‐(2‐hydroxypropyl))‐β‐cyclodextrin (2HP‐β‐CyD) were found to associate most strongly with TETS as reflected in the magnitude of their binding constants (K = 537 ± 26 M^?1 for β‐CyD and K = 514 ± 49 M^?1 for 2HP‐β‐CyD). Two‐dimensional rotating‐frame Overhauser effect spectroscopy NMR experiments confirm close proximity of the TETS molecule to both β‐CyD and 2HP‐β‐CyD as intermolecular, through‐space interactions between the H3 and H5 protons located in the interior of the CyD cavity and the methylene protons of TETS were identified. Copyright © 2012 John Wiley & Sons, Ltd.     

Simple matching vs linear assignment in scheduling models with positional effects: A critical review

This paper addresses scheduling models in which a contribution of an individual job to the objective function is represented by the product of its processing time and a certain positional weight. We review most of the known results in the area and demonstrate that a linear assignment algorithm as part of previously known solution procedures can be replaced by a faster matching algorithm that minimizes a linear form over permutations. Our approach reduces the running time of the resulting algorithms by up to two orders, and carries over to a wider range of models, with more general positional effects. Besides, the same approach works for the models with no prior history of study, e.g., parallel machine scheduling with deterioration and maintenance to minimize total flow time.     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

Sr,Ca掺杂对铝酸盐蓝色荧光粉性能的影响

采用高温固相反应法制备了掺杂Sr,Ca的碱土金属铝酸盐蓝色荧光粉。通过测试发现粉样的发光强度与热稳定性均有了较大提高。这与Sr,Ca取代BaMgAl10O17:Eu^2 中的部分Ba后晶体结构变化有关。掺杂少量的Sr,Ca后,所得荧光粉的晶格参数c变小,晶胞体积也随之变小。因此减小了对发光有害的缺陷浓度,并增加了粉样的热稳定性能。     

Inventory returns and special sales in a lot-size system with constant rate of deterioration

The problem of returning or of selling the inventory excess to optimal stock level is considered for deteriorating items. Two inventory models, viz. the infinite and the finite horizon models, are developed, in which the deterioration is assumed to be a constant fraction of the on hand inventory. Both the models are developed under the assumptions of instantaneous delivery and no shortages. When there is no deterioration, the developed models are related to the corresponding inventory models for non-deteriorating items. Examples are given to illustrate the derived results.     

Multi-level lot sizing and job shop scheduling with compressible process times: A cutting plane approach

This paper proposes an integer linear programming formulation for a simultaneous lot sizing and scheduling problem in a job shop environment. Among others, one of our realistic assumptions is dealing with flexible machines which enable the production manager to change their working speeds. Then, a number of valid inequalities are developed based on problem structures. As the valid inequalities can help in reducing the non-optimal parts of the solution space, they are dealt with as some cutting planes. The proposed cutting planes are used to solve the problem in (i) cut-and-branch, and (ii) branch-and-cut approaches. The performance of each cutting plane is investigated with CPLEX 12.2 on a set of randomly-generated test data. Then, some performance criteria are identified and the proposed cutting planes are ranked by TOPSIS method.