Cardinality enrichment of flexible cross correlation (FCC) code for SAC-OCDMA system by alleviation interference scheme (AIS)

In this paper, we propose an alleviation interference scheme (AIS) for spectral amplitude coding (SAC) – optical code division multiple access (OCDMA) coding system approaches. The AIS SAC-OCDMA systems is demonstrated by utilizing the new flexible cross correlation (FCC) code. The FCC code has advantages, such as flexibility in-phase cross-correlation at any given number of users and weights, as well as effectively reduces the impacts of phase-induced intensity noise (PIIN) and has the multiple-access interference (MAI) cancelation property. The results indicated good performance whereas the FCC (W = 4, K = 150) AIS SAC-OCDMA coding system offers 66%, 172%, 650% and 900% percentage of cardinality enrichments as a contrast to DCS (W = 4, K = 90), MDW (W = 4, K = 55), MFH (W = 4, K = 20) and Hadamard (W = 8, K = 15) codes, respectively. Finally, the FCC AIS SAC-OCDMA coding system has low effective receive power Psr = −21 dBm which is expected to be more significant for future SAC-OCDMA coding systems without requiring any amplification at the receiving plant.     

A novel super-FEC code based on concatenated code for high-speed long-haul optical communication systems

The structures of the novel super forward error correction (Super-FEC) code type based on the concatenated code for high-speed long-haul optical communication systems are studied in this paper. The Reed-Solomon (RS) (255, 239) + Bose-Chaudhuri-Hocguenghem (BCH) (1023, 963) concatenated code is presented after the characteristics of the concatenated code and the two Super-FEC code type presented in ITU-T G.975.1 have theoretically been analyzed, the simulation result shows that this novel code type, compared with the RS (255, 239) + convolutional-self-orthogonal-code (CSOC) (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1, has a lower redundancy and better error-correction capabilities, and its net coding gain (NCG) at the third iteration is 0.57 dB more than that of RS (255, 239) + CSOC (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1 at the third iteration for the bit error rate (BER) of 10⁻¹². Therefore, the novel code type can better be used in long-haul, larger capacity and higher bit-rate optical communication systems. Furthermore, the design and implementation of the novel concatenated code type are also discussed.     

Novel family of prime codes for synchronous optical CDMA

In this paper we have proposed a novel prime spreading sequence family hereby referred to as “new-Modified Prime Code (n-MPC)” for direct-detection synchronous optical code-division multiple-access (OCDMA) networks. The new code has been applied to Overlapping Pulse-Position Modulation (OPPM) CDMA system and the performance of system is evaluated. In addition, we have analyzed the system throughput and also introduced a new interference cancellation technique which significantly improves the bit error probability (BEP) of OPPM-OCDMA systems.     

Use of threshold activation technique in estimating energy distributions of accelerator produced neutrons

A study of effective implementation of threshold activation technique for neutron spectral analysis in the environment of an alpha-cyclotron target is presented. The activation data are analysed using LOUHI-82 code. Optimal choices of the regularization parameters of the code are studied and discussed. Energy distribution of neutrons emitted from thick targets of Be, C and Ta irradiated by 40–45 MeV alphas is discussed.     

Use of the EUR LiB 15/5 data set for radiation shielding calculations in iron

Abstract

The shielding effect of an iron sphere assembly has been tested for a Pu-α-Be neutron source placed in the center of the shield assembly. Emergent neutron and gamma spectra were measured with a stilbene scintillation counter. Discrimination between neutrons and gammas was achieved by the pulse shape discrimination technique based on the zero crossing method. Calculations have been made using the one-dimensional transport code ANISN-Westinghouse version (ANISN-W) and the EUR LiB 15/5 cross section data set. The agreement between measurements and calculations indicates that the cross section set and the calculation model are suitable for studying the iron shielding experiments over the neutron energy range 1.35–10 MeV and the gamma energy range 0.3–6 MeV. Total macroscopic cross sections for fast neutrons, linear attenuation coefficients for gamma rays and half-value thicknesses for neutrons and gammas for the whole energy range and at different energies have been obtained.     

Ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence method for the detection of protein

An ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence (IM-ECL) method for the detection of protein is developed. The target protein is captured by biotin-labeled aptamer (biotin probe) and [Ru(bpy)₃]²⁺ (TBR)-Au bio bar code-labeled aptamer (ECL nanoprobe), to form a double aptamer–protein sandwich complex. The complex is then immobilized on the streptavidin microbeads through biotin–streptavidin linkage and detected by ECL assay. The ECL signal of the target protein is amplified by the TBR-bio bar code DNAs. As an example, platelet-derived growth factor B-chain homodimer (PDGF-BB) was detected by the method. Experimental results show that the detection limit of the assay is 1 pM of PDGF-BB. A calibration curve with a linearity range from 1 pM to 10 nM is established, thus, make quantitative analysis possible. The method has been used to detect PDGF-BB in fetal calf serum with minimum background interference. Due to the wide availability of aptamer for numerous proteins, this aptamer-based bio bar code IM-ECL method holds great promise in protein detection.     

Modeling and Flowsheet Design of an Am Separation Process Using TODGA and H4TPAEN

Recycling americium from spent fuels is an important consideration for the future nuclear fuel cycle, as americium is the main contributor to the long-term radiotoxicity and heat power of the final waste, after separation of uranium and plutonium using the PUREX process. The separation of americium alone from a PUREX raffinate can be achieved by co-extracting lanthanide (Ln(III)) and actinide (An(III)) cations into an organic phase containing the diglycolamide extractant TODGA, and then stripping Am(III) with selectivity towards Cm(III) and lanthanides. The water soluble ligand H₄TPAEN was tested to selectively strip Am from a loaded organic phase.Based on experimental data obtained by Jülich, NNL and CEA laboratories since 2013, a phenomenological model has been developed to simulate the behavior of americium, curium and lanthanides during their extraction by TODGA and their complexation by H₄TPAEN (complex stoichiometry, extraction and complexation constants, kinetics). The model was gradually implemented in the PAREX code and helped to narrow down the best operating conditions. Thus, the following modifications of initial operating conditions were proposed:

• •An increase in the concentration of TPAEN as much as the solubility limit allows.
• •An improvement of the lanthanide scrubbing from the americium flow by adding nitrates to the aqueous phase.

A qualification of the model was begun by comparing on the one hand constants determined with the model to those measured experimentally, and on the other hand, simulation results and experimental data on new independent batch experiments.A first sensitivity analysis identified which parameter has the most dominant effect on the process. A flowsheet was proposed for a spiked test in centrifugal contactors performed with a simulated PUREX raffinate with trace amounts of Am and Cm. If the feasibility of the process is confirmed, the results of this test will be used to consolidate the model and to design a flowsheet for a test on a genuine PUREX raffinate. This work is the result of collaborations in the framework of the SACSESS European Project.     

基于射频前端的GPS软件接收机设计与验证

介绍了基于硬件射频前端的GPS软件接收机设计与验证。针对GPS串行的搜索算法速度慢的缺点,采用了高速的并行码相位搜索算法;设计和实现了码跟踪环和载波跟踪环,并用载波环路来辅助码跟踪环路;综合考虑接收机的动态性和噪声影响,采用最优化设计思想,设计了GPS软件接收机最优环路带宽。采用GPS中频信号采样器采集实际GPS数据,对搜索和跟踪算法进行了验证。测试结果证明所设计的搜索和跟踪方法是有效的,使得用户在微弱信号处理、多路径处理和发展新的算法等方面具有更大的灵活性,为实际的高性能硬件GPS接收机设计提供的重要的基础。