Stress concentration and effective stiffness of aligned fiber reinforced composite with anisotropic constituents

The paper addresses the problem of calculation of the local stress field and effective elastic properties of a unidirectional fiber reinforced composite with anisotropic constituents. For this aim, the representative unit cell approach has been utilized. The micro geometry of the composite is modeled by a periodic structure with a unit cell containing multiple circular fibers. The number of fibers is sufficient to account for the micro structure statistics of composite. A new method based on the multipole expansion technique is developed to obtain the exact series solution for the micro stress field. The method combines the principle of superposition, technique of complex potentials and some new results in the theory of special functions. A proper choice of potentials and new results for their series expansions allow one to reduce the boundary-value problem for the multiple-connected domain to an ordinary, well-posed set of linear algebraic equations. This reduction provides high numerical efficiency of the developed method. Exact expressions for the components of the effective stiffness tensor have been obtained by analytical averaging of the strain and stress fields.     

Ab-initio simulation of elastic constants for some ceramic materials

Athermal elasticity for some ceramic materials (α-Al₂O₃, SiC (α and β phases), TiO₂ (rutile and anatase), hexagonal AlN and TiB₂, cubic BN and CaF₂, and monoclinic ZrO₂) have been investigated via density functional theory. Energy-volume equation-of-state computations to obtain the zero pressure equilibrium volume and bulk modulus as well as computations of the full elastic constant tensor of these ceramics at the experimental zero pressure volume have been performed. The present results for the single crystal elasticity are in good agreement with experiments both for the aggregate properties (bulk and shear modulus) and the elastic anisotropy. In contrast, a considerable discrepancy for the zero pressure bulk modulus of some ceramics evaluated from the energy-volume fit to the computational zero pressure volume has been observed.     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Metastability of a circular o-ring due to intrinsic curvature

An o-ring takes spontaneously the shape of a chair when strong enough torsion is applied in its tangent plane. This state is metastable, since work has to be done on the o-ring to return to the circular shape. We show that this metastable state exists in a Hamiltonian where curvature and torsion are coupled via an intrinsic curvature term. If the o-ring is constrained to be planar (2d case), this metastable state displays a kink-anti-kink pair. This state is metastable if the ratio is less than , where C and A are the torsion and the bending elastic constants [#!landau!#]. In three dimensions, our variational approach shows that . This model can be generalized to the case where the bend is induced by a concentration field which follows the variations of the curvature. Received: 27 August 1997 / Revised: 23 October 1997 / Accepted: 12 November 1997     

After-Effects of Electrolytically diffused hydrogen in the second-order elastic coefficient of poynting’s effect in nickel and steel

Summary If hydrogen is diffused electrolytically in a metal, it subsequently escapes out if the metal is left to itself. However this hydrogen-treated metal does not totally regain the original magnitudes of its various physical properties,e. g., thermo e.m.f., electrical resistivity, elastic modulii etc. This effect has also been observed in the second-order elastic effect (the Poynting effect) in nickel and two varieties of steel. Measurements were carried out first before hydrogen diffusion. The samples were electrolytically diffused with hydrogen and the left to themselves for a few days and the measurements were repeated. The changed values of the coefficient of Poynting effect are discussed in terms of the dislocations created by in-and out-going hydrogen. Now retired     

Elasticity in nanocrystalline Nd2Fe14B+αFe magnetic composites

The dynamic Young modulus (E) of magnetic Nd₂Fe₁₄B+αFe nanocomposites is investigated with mechanical spectroscopy techniques (vibrating reed configuration, f≈1.5 kHz <10⁻⁶). Reduced values of E are obtained (88–152 GPa) as compared with that predicted by the rule of mixtures for the composite (164 GPa). Three contributions to this reduction are briefly discussed: a large volume fraction of the specimen with grain boundary like structure; internal pores, resulting from the high cooling rate during processing (10⁶ K/min) and magneto-mechanical effects. Even when porosity is identified as the principal cause of modulus reduction, magnetic effects are also detected.     

劳动力供给带弹性的Solow模型

本文给出了在劳动力供给带弹性条件下的Ｓｏ１ｏｗ增长模型，给出了经济增长的黄金律和均衡处资本稳定性的证明，并且与不带弹性的Ｓｏｌｏｗ模型作了比较．     

芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的流变性能

用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了以对羟基苯甲酸（ＰＨＢ）、对苯二甲酸（ＴＰＡ）和双酚Ａ（ＢＰＡ）为单体合成的共聚芳酯液晶熔体的流变性能。结果表明，切变速率、熔体温度及ＰＨＢ链节含量对切粘度和结构粘度有很大的影响。切变速率在１０～１０３／Ｓ、温度２９５～３３０℃范围内，共聚酯粘流活化能△Ｅη为７４．５～２０５．１（ｋＪ／ｍｏｌ）。液晶熔体在剪切流中存在屈服应力τｏ，随温度升高τｏ值降低。在低温、低切变速率下，共聚酯熔体的弹性很小，甚至呈现挤出收缩现象。     

Influence of high pressure treatment on rheological and other properties of egg white

Abstract

The paper deals with the influence of high pressure treatment of fresh egg white on its properties and protein composition (individual amino-acids predicted as a function of pressure and time levels). The rheological properties are changed by high pressure from Newtonian to non-Newtonian behaviour, with increasing apparent viscosity as the pressure and time increased. The pH, whipping ability, foam stability, gel strength of heat induced gels after treatment and the whole protein content, were also predicted.

The results showed that the foam stability is increased with increasing pressure and time of processing. The foam volume is also increased with pressure. The pH did not change with pressure or time of processing. Composition of proteins as indicated by individual amino-acids did not exhibit statistically important changes. Gel strength of heat induced gels prepared from previously pressured liquid whites showed no important change of values with pressure or time of treatment. The modulus of elasticity showed a decrease for samples pressured to 400 MPa for 5 up to 15 minutes.     

Uniaxial deformation and orientation of ethylene–tetrafluoroethylene films

This study concerns the thermal and mechanical response of several commercial grades of ethylene – tetrafluoroethylene copolymer films. Differential scanning calorimetry was used to show that, although films have similar degrees of crystallinity and melting temperature, the melting endotherms and crystallisation exotherms differ between materials, suggesting small changes in composition between manufacturers. Films were deformed in tension at a range of temperatures and rates. Selected films were unloaded immediately after stretching, and measurement of the elastic recovery highlighted further differences between materials. Batches of films were pre-drawn uniaxially above the glass transition and immediately quenched. When these materials were subsequently re-drawn below the glass transition temperature, most of them exhibited much improved yield stress, modulus and tensile strength (improving by factors of 5, 5 and 4, respectively at a draw ratio of 3), but a reduced strain to failure. In most of the films, the pre-drawing, as well as the initial orientation of the films, is accounted for by a simple shift in the true strain axis. This is indicative of a material response dominated by entropic network stretch. It also suggests that, in the cases where strain superposition does not work, a different arrangement of crystalline lamellae may be present, limiting the extent to which improved properties can be achieved in some materials.