微型圆光栅刻划偏心量的控制

对微型圆光栅刻划偏心误差问题进行了讨论。提出了微型圆光栅刻划时偏心调试误差的公差范围。     

Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology,rheology property,and crystallization behavior

The polypropylene (PP)/polystyrene (PS)/montmorillonite (MMT) blends were prepared by an innovative eccentric rotor extruder based on continuous elongational flow. Addition of MMT nanoparticles was found to reduce the PS droplet size and improve the compatibility of PP/PS. The MMT nanoparticles had clear intercalation and/or exfoliation structures and were located mostly at the interface of PP/PS. It was found that the intercalation and exfoliation of MMT was finished under the synergy of interfacial interaction and tensile deformation so that we called the mechanism as “MMT exfoliation mechanism induced by synergy of interface and tensile deformation”. The rheological analysis showed that incorporation of MMT led to an increase in complex viscosity to an optimum level (5 wt%), after which any further increase in MMT concentration decreased the complex viscosity. Moreover, the degree of crystallinity of blends was controlled by the heterogeneous nucleation effect of MMT and the inhibition effect of PS.     

Investigation of resonant properties of metal core–shell nanoparticles using T-matrix calculations

Using T-matrix method, plasmon resonance properties of metal core–shell nanoparticles are systematically investigated. It is shown that dielectric/metal core–shell structure may be excited stronger at resonance than metal/dielectric and hetero-metal ones, but the resonance states are extremely sensible to the layers thickness. For three-layer nanospheres, resonance properties will be dominated by a sub-10 nm silver outermost shell, while only weakened by a silica one. Finally, tiny eccentric distance between the centers of core and shell in eccentric two-layer nanoparticles may fundamentally change the resonance mode of nanoparticles, and results in higher local electrical field enhancement than concentric nanospheres.     

Numerical solution of an extended White–Metzner model for eccentric Taylor–Couette flow

In this study, we have developed a new numerical approach to solve differential-type viscoelastic fluid models for a commonly used benchmark problem, namely, the steady Taylor—Couette flow between eccentric cylinders. The proposed numerical approach is special in that the nonlinear system of discretized algebraic flow equations is solved iteratively using a Newton–Krylov method along with an inverse-based incomplete lower-upper preconditioner. The numerical approach has been validated by solving the benchmark problem for the upper-convected Maxwell model at a large Deborah number. Excellent agreement with the numerical data reported in the literature has been found. In addition, a parameter study was performed for an extended White–Metzner model. A large eccentricity ratio was chosen for the cylinder system in order to allow flow recirculation to occur. We detected several interesting phenomena caused by the large eccentricity ratio of the cylinder system and by the viscoelastic nature of the fluid. Encouraged by the results of this study, we intend to investigate other polymeric fluids having a more complex microstructure in an eccentric annular flow field.     

Flow due to parallel disks rotating about non-coincident axis with one of them oscillating in its plane

An exact solution of the Navier–Stokes equations is obtained for the flow between two eccentric disks rotating with the same angular velocity and one of them executing non-torsional oscillations. An analytical solution describing the flow at large and small times after the start is given. The solutions depend on the ratio of the frequency of oscillation to the angular velocity of the disks and the ratio of the amplitude of oscillation to the angular velocity of the disks and to the distance between the axes of rotation, and the Reynolds number based on the distance between the disks and the angular velocity of the disks. The solutions for three cases when the angular velocity is greater than the frequency of oscillation or it is smaller than the frequency or it is equal to the frequency are discussed.     

Investigation on Properties of Polypropylene/Multi-walled Carbon Nanotubes Nanocomposites Prepared by a Novel Eccentric Rotor Extruder Based on Elongational Rheology

The properties of polymer matrix composites are related not only to the chemical composition of the materials but also to the processing equipment used for their preparation which has a direct influence on the microstructure of the composites. In this paper polypropylene (PP)/multi-walled carbon nanotubes (MWCNTs) nanocomposites were prepared by melt blending through a self-developed, eccentric rotor extruder (ERE). The structure and elongational deformation mechanism of an ERE were described in detail. The morphological, rheological, thermal and mechanical properties of the resulting PP/MWCNTs nanocomposites were investigated. Scanning electron microscopy (SEM) and rheological analysis showed that the MWCNTs were well dispersed in the PP matrix. The thermal stability was investigated by thermogravimetric analysis (TGA) and indicated that the addition of MWCNTs could effectively improve the thermal stability of pure PP. The percentage of crystallinity and tensile strength of the composites were improved as a result of the heterogeneous nucleation effect of the MWCNTs in the PP matrix. The research results revealed that the enhancement of the properties of PP/MWCNTs composites could be attributed to a better dispersion of the MWCNTs in the matrix as compared to samples prepared by conventional extrusion.     

Iterative Intensity Integration Technique (IIIT) for contouring reflective surfaces

Intensity Integration Technique (IIT) is an image correlation technique founded on energy conservation principle to contour reflective surfaces. The sum (integral) of intensities along pixel lines is identified as correlation parameter between the loaded and the unloaded images. At present, this procedure is employed to contour 2D reflective plates aided by projected gridlines onto reflected intensity images. Here, the gridline projection is dispensed with thereby simplifying the experimental procedure, with an iterative algorithm, Iterative Intensity Integration Technique (IIIT), developed to contour deformed reflective plates. In illustration, centrally as well as eccentrically loaded circular plates are studied. As a viable extension of IIIT, a method is suggested for generating digital Moiré fringes with pixel lines as grating lines.     

Characterization of eccentric digraphs

The eccentric digraphED(G) of a digraph G represents the binary relation, defined on the vertex set of G, of being ‘eccentric’; that is, there is an arc from u to v in ED(G) if and only if v is at maximum distance from u in G. A digraph G is said to be eccentric if there exists a digraph H such that G=ED(H). This paper is devoted to the study of the following two questions: what digraphs are eccentric and when the relation of being eccentric is symmetric.We present a characterization of eccentric digraphs, which in the undirected case says that a graph G is eccentric iff its complement graph is either self-centered of radius two or it is the union of complete graphs. As a consequence, we obtain that all trees except those with diameter 3 are eccentric digraphs. We also determine when ED(G) is symmetric in the cases when G is a graph or a digraph that is not strongly connected.