Ultrahigh‐molecular‐weight‐polyethylene‐fiber surface treatment by electron‐beam‐irradiation‐induced graft polymerization and its effect on adhesion in a styrene–butadiene rubber matrix

Aiming to develop a high‐performance fiber‐reinforced rubber from styrene–butadiene rubber (SBR), we applied a special technique using electron‐beam (EB)‐irradiation‐induced graft polymerization to ultrahigh‐molecular‐weight‐polyethylene (UHMWPE) fibers. The molecular interaction between the grafted UHMWPE fibers and an SBR matrix was studied through the evaluation of the adhesive behavior of the fibers in the SBR matrix. Although UHMWPE was chemically inert, two monomers, styrene and N‐vinyl formamide (NVF), were examined for graft polymerization onto the UHMWPE fiber surface. Styrene was not effective, but NVF was graft‐polymerized onto the UHMWPE fibers with this special method. A methanol/water mixture and dioxane were used as solvents for NVF, and the effects of the solvents on the grafting percentage of NVF were also examined. The methanol/water mixture was more effective. A grafting percentage of 16.4% was the highest obtained. This improved the adhesive force threefold with respect to that of untreated UHMWPE fibers. These results demonstrated that EB irradiation enabled graft polymerization to occur even on the inert surface of UHMWPE fibers. However, the mechanical properties of the fibers could be compromised according to the dose of EB irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2595–2603, 2004     

Synergistic effect of combination of Irganox 1010 and zinc stearate on thermal stabilization of electron beam irradiated HDPE/EVA both in hot water and oven

Thermo-oxidative stability of HDPE/EVA blends can be considerably increased by combination of a high-molecular weight phenolic antioxidant and zinc stearate. In this work, the post-irradiation thermal stability of HDPE/EVA blends has been studied. High-density polyethylene and its blends with ethylene-vinylacetate copolymer in both pure form and mixed with Irganox 1010 and zinc stearate were exposed to electron beam radiation at doses between 80 and 150 kGy, at room temperature, in air. In order to evaluate the thermal stability of the samples, post-irradiation heat treatments were done in both hot water bath at 95 °C and in an oven at 140 °C. The mechanical properties and changes in the chemical structure were determined during thermal aging in hot water and oven. The gel content was enhanced by increasing EVA concentration in all applied doses. The stabilized blends have lower gel content than the unstabilized samples. From the results of heat aging treatments it was observed that the thermal stability of the unstabilized blend samples was lower than HDPE. Thermal stability of the samples has been improved by incorporation of Irganox 1010 and zinc stearate. Formation of hydroxyl group was insignificant for stabilized samples during heat aging in both conditions. Also, the changes in the value of oxidation induction time (OIT) for the stabilized samples were negligible after prolonged immersion in hot water.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

荧光光谱法研究磷酰化5,7-二羟基黄酮与ctDNA的相互作用

以溴化乙锭(EB)为荧光探针,研究了磷酰化5,7-二羟基黄酮与ctDNA的相互作用。实验结果表明,磷酰化5,7-二羟基黄酮与ctDNA间存在相互作用。随着温度的升高,磷酰化5,7-二羟基黄酮对ctDNA-EB体系的荧光猝灭常数降低,磷酰化5,7-二羟基黄酮可与ctDNA形成复合物,此猝灭过程为静态猝灭。根据Stern-Volmer方程,算出25℃及37℃下磷酰化5,7-二羟基黄酮对ctDNA-EB体系的荧光猝灭常数分别为Kq1=30 860 L/mol及Kq2=27 760 L/mol,并且算出它与ctDNA结合的平衡常数为KM=2.39×107L/mol。     

Spectroscopic studies of structural changes in irradiated LDPE and its blends

The low temperature glass transition occurring at low temperature in polyethylene samples was studied using Fourier transform infrared, FT‐Raman spectroscopic techniques, which are known to be sensitive to any structural changes in the investigated samples. Anomalous behavior was obtained in the temperature range (98 K → 383 K) indicating the existence of phase transition occurring at about 98 K and disappearing at about 323 K while heating for unirradiated virgin low density polyethylene (VPE) sample with or without crosslinking agent (trimethylol propane triacrylate, TMPTA). Addition of TMPTA monomer caused severe changes in the temperature dependence of both unirradiated and irradiated polyethylene samples. The results given indicated the occurrence of abnormal temperature dependence, which is thought to be related with low temperature structural change resulting from local crosslinking in scrapped polyethylene (SPE) sample already suffering from high degree of crosslinking. Differential scanning calorimetry (DSC) thermograms confirmed the observed new phase transition observed in both unirradiated and irradiated TMPTA loaded VPE/SPE (50/50 wt %) blend. Irradiation, addition of TMPTA as a crosslinking agent, and blending VPE with SPE were found to affect remarkably the variation of the vibration spectrum of LDPE and consequently the resulting structural changes. The experimental results obtained were discussed and correlated with reorientational disorders of the molecular segments (local crosslinking). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 850–859, 2007     

Preparation,morphology and electrical conductivity of polyaniline/polyoxyalkylene–montmorillonite exfoliated nanocomposites

Polyaniline (PANI)/organoclay exfoliated nanocomposites containing different organoclay contents (14–50 wt%) were prepared. PANI emeraldine base (EB) and oligomeric PANI (o‐PANI) were intercalated into montmorillonite (MMT) modified by four types of polyoxyalkylene diamine or triamine (organoclay) using N‐methyl pyrolidinone (NMP) as a solvent in the presence of 0.1 M HCl. o‐PANI and EB have been synthesized by oxidative polymerization of aniline using ammonium peroxydisulfate (APS). Infrared absorption spectra (IR) confirm the electrostatic interaction between negatively charged surface of MMT and positively charged sites in PANI. X‐ray diffraction (XRD) studies disclosed that the d₀₀₁ spacing between interlamellar surface disappeared at low content of the organoclay. The morphology of these materials was examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Electrical conductivities of the PANI‐organoclay and o‐PANI‐organoclay nanocomposites were 1.5 × 10^?3–2 × 10^?4 and 9.5 × 10^?7–1.8 × 10^?9 S/cm, respectively depending on the ratio of PANI. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface treatment of PET fiber by EB-irradiation-induced graft polymerization and its effect on adhesion in natural rubber matrix

Aiming to develop a high performance fiber-reinforced natural rubber (NR) without using resorcinol formaldehyde latex (RFL) adhesives of environmental load substances, a special technique using electron beam (EB) irradiation-induced graft polymerization was applied to high-modulus polyethylene terephthalate (PET) fibers. Although PET is chemically inert, acrylate functional silane could be graft-polymerized onto the PET fiber surface by this special technique. The composite of NR and grafted PET fibers indicated a linear increase in the initial modulus with the fiber content. The fiber reinforced rubber with a good performance was obtained in the system of NR and grafted PET fibers.     

Synthesis of urethane acrylates modified by linseed oil and study on EBC coatings

In this paper, five different structural urethane acrylates modified by linseed oil were synthesized and then properties of their electron beam cured (EBC) coatings, i.e., adhesion, gloss, flexibility, impact resistance, hardness, tensile strength and elongation were studied. It was shown that these synthesizing conditions of urethane acrylates modified by linseed oil were temperate. Effect of structure of urethane acrylates modified by linseed oil on these properties of their EBC coatings was obvious, except gloss. According to synthetical properties of EBC coatings, the optimum oligomer among these was No. A, whose main chains were formed by hexane diacid, average functionality was 2, and oil content was 25.5%. With increasing of absorbed doses, these properties of EBC coatings, except gloss, changed correspondingly. It was advisable that absorbed dose wasn’t greater than 180 kGy. At higher absorbed doses, cobaltous naphthenate had obvious effect on these properties of EBC coatings, whose oil content of linseed oil was rather high.     

5 MeV Proton irradiation effects on 200 GHz silicon–germanium heterojunction bipolar transistors

The total dose effects of 5?MeV proton and Co-60 gamma irradiation in the dose range from 1 to 100?Mrad on advanced 200?GHz Silicon–Germanium heterojunction bipolar transistors (SiGe HBTs) are investigated. The SRIM simulation study was conducted to understand the energy loss of 5?MeV proton ions in SiGe HBT structure. Pre- and post-radiation DC figure of merits such as forward- and inverse-mode Gummel characteristics, excess base current, DC current gain and output characteristics were used to quantify the radiation tolerance of the devices. The results show that the proton creates a significant amount of damages in the surface and bulk of the transistor when compared with gamma irradiation. The SiGe HBTs shows robust ionizing radiation tolerance even up to a total dose of 100?Mrad for both radiations.     

利用电子束蒸发制备铝隧道结工艺研究

采用电子束蒸发的方法在Si片上制备超导铝(Al)薄膜。利用X射线衍射和直流四电极电阻法分别测试了厚度从100埃到5000埃的Al薄膜物向组成,超导转变温度(Tc)和临界电流密度(Jc)。当Al薄膜厚度大于500埃时,超导转变温度Tc=1.2K。电子束蒸发制备的Al薄膜性能良好,具有较高的结晶质量,为制备Al超导隧道结奠定了良好基础。对小面积的Al超导隧道结工艺进行了研究,该超导隧道结两层的超导体材料为Al薄膜,中间势垒层材料为Al2O3。其中Al薄膜利用电子束蒸发制备,势垒层通过直接氧化Al薄膜表面实现,该工艺和采用直接蒸发氧化物薄膜工艺相比不仅简单而且能有效防止势垒层不连续造成的弱连接。