强爆轰参数的理论估算

用两相的排平物态方程对硝基甲烷的强爆轰参数进行了理论估算 ,理论值与拟稳态强爆轰的实验值(爆速、爆压和爆温 )符合得很好 .这既检验了这种理论估算方法 ,也再次检验了爆轰的ZND理论和两相的排平物态方程 ,也是对实验方法的一种支持 .常k形物态方程的强爆轰参数理论估算方法也得到了有条件的肯定     

Onset of detonation in polydispersed fuel–air mixtures

Investigations of detonation onset in pulverized fuel–air mixtures were carried out. Combustion and detonation processes in sprays differ greatly from that in homogeneous mixtures, because not only chemical reactions, but physical processes of combustible mixture formation take place within the combustion zone (droplets atomization and evaporation). The polydispersed character of mixture and non-uniformity of droplet spatial distribution strongly affects spray combustion and detonation onset. The present paper contains the results of theoretical and experimental investigations of detonation onset peculiarities in polydispersed non-uniform hydrocarbon–air mixtures.     

Contemplation on Detonation Pressures of Nitramines and ­Nitro Aromatics

A physical model and a mathematical theory for the detonation pressures of explosives materials were developed. The pressure values are expressed as function of the detonation velocity (D) and the average mass (m) of the gaseous products, and are applied for various nitramines and aromatic nitro compounds including nitro pyrimidines and nitro triazines. Some regression equations were obtained and discussed. The pressure values show poor linear dependence on the average mass of the products but good dependence on the detonation velocities alone or Dm. Moreover, for the same Dm value nitramines should produce more pressure than aromatic nitro compounds. This work deals with pressure developed by explosion products and interrelates it with detonation pressure within the constraints of certain assumptions and pays attention to so far unnoticed relationships at least under certain circumstances.     

Nitro Derivatives of Parabanic Acid as Potential Explosives: A Theoretical Study

This work deals with certain parabanic acid (PA) derivatives because they possess great calculated density (>1.8 g · cm^–3) and high content of nitrogen (26 %). Computed ballistic properties of eight different parabanic acid derivatives are presented. The structures were optimized at the B3LYP/6‐31G(d, p) level. The calculated data for PA are found to be compatible with the experimental X‐ray data. The detonation performance analyses were done using empirical Kamlet‐Jacobs equations. Additionally, detonation products were assigned and power index were calculated. All the compounds considered are powerful candidates for high energy materials.     

双（2,2-二硝基丙基）甲缩醛的结构和爆轰性能的量子化学研究

利用B3LYP/6-311＋G（2d,p）方法对一种新型含能增塑剂双（2,2-二硝基丙基）甲缩醛进行几何优化,计算了其红外光谱、生成焓和爆轰特性. 分析了最弱键的键离解能和键级并预测了目标化合物的热稳定性. 结果表明双（2,2-二硝基丙基）甲缩醛中的四个N-NO2键的键离解能都为164.38 kJ/mol. 表明目标化合物是一个热力学性能稳定的化合物. 以凝聚相生成焓和分子密度为基础,采用Kamlet-Jacobs方法预测其爆速和爆压. 目标化合物的晶体结构属于P21空间群.     

Assessment of Thermal Stability and Detonation Performance of 4-Amino-1,2,4-triazolium Nitrate as compared to 2,4,6-Trinitrotoluene for Melt-cast Explosives

4-Amino-1,2,4-triazolium nitrate (4-ATN) is an energetic and non-sensitive ionic liquid, which was introduced as a good candidate in previous works for the replacement of 2,4,6-trinitrotoluene (TNT) in melt-cast explosives. Since previous studies used pure nitric acid for nitration of 4-ATN, the effect of the use of low price industrial nitric acids (50 %, 70 % and 98 %) is investigated on the percent yields of 4-ATN. The thermogravimetric and differential scanning calorimetry (TGA/DSC) are done on the synthesized 4-ATN with impure nitric acid at a heating rate of 10 K · min^–1 by the vacuum system. The obtained TGA/DSC curves confirm decomposition of 4-ATN involving melting and dissociation. Derivative thermogravimetric (DTG) curves of 4-ATN at various heating rates are applied to obtain activation energy of thermolysis by several model-free techniques. The calculated activation energies are in the range 78.7–87.7 kJ · mol^–1, which are about 10 kJ · mol^–1 more than the reported activation energy of industrial TNT (purity 98.2 %), i.e. 66–70 kJ · mol^–1. Assessments of detonation performance of 4-ATN are also compared with TNT, which show higher detonation performance of 4-ATN. Thus, 4-ATN can be used with nitramine compounds as melt-cast explosives with higher thermal stability and detonation performance than corresponding nitramine compound/TNT explosives.     

三维无溶剂含能Ag-MOF的制备、热分解动力学及爆炸性能

Solvent molecules can significantly reduce the heat of detonation and stability of energetic metal-organic framework (EMOF) materials, and the development of solvent-free EMOFs has become an effective strategy to prepare high-energy density materials. In this study, a solvent-free EMOF, [Ag₂(DTPZ)]_n (1) (N% = 32.58%), was synthesized by reacting a high-energy ligand, 2, 3-di(1H-tetrazol-5-yl)pyrazine (H₂DTPZ), with silver ions under hydrothermal conditions, and it was structurally characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, and thermal analysis. In 1, the DTPZ²⁻ ligands that adopted a highly torsional configuration bridged the Ag⁺ ions in an octadentate coordination mode to form a three-dimensional framework (ρ = 2.812 g∙cm⁻³). The large steric effect and strong coordination ability of DTPZ²⁻ effectively prevented the solvent molecules from binding with the metal centers or occupying the voids of 1. Moreover, the strong π-π stacking interactions [centroid-centroid distance = 0.34461(1) nm] between the tetrazole rings in different DTPZ²⁻ ligands provided a high thermal stability to the framework (T_e = 619.1 K, T_p = 658.7 K). Thermal analysis showed that a one-step rapid weight loss with intense heat release primarily occurred during the decomposition of 1, suggesting potential energetic characteristics. Non-isothermal thermokinetic analyses (based on the Kissinger and Ozawa-Doyle methods) were performed using differential scanning calorimetry to obtain the thermoanalysis kinetic parameters of the thermodecomposition of 1 (E_a = 272.1 kJ·mol⁻¹, E_o = 268.9 kJ·mol⁻¹; lgA =19.67 s⁻¹). The related thermodynamic parameters [enthalpy of activation (ΔH^≠ = 266.9 kJ·mol⁻¹), entropy of activation (ΔS^≠ = 125.4 J·mol⁻¹·K⁻¹), free energy of activation (ΔG^≠ = 188.3 kJ·mol⁻¹)], critical temperature of thermal explosion (T_b = 607.1 K), and self-accelerating decomposition temperature (T_SADT = 595.8 K) of the decomposition reaction were also calculated based on the decomposition peak temperature and extrapolated onset temperature when the heating rate approached zero. The results revealed that 1 featured good thermal safety, and its decomposition was a non-spontaneous entropy-driven process. The standard molar enthalpy for the formation of 1 was calculated to be (2165.99 ± 0.81) kJ·mol⁻¹ based on its constant volume combustion energy determined using a precise rotating oxygen bomb calorimeter. Detonation and safety performance tests revealed that 1 was insensitive to impact and friction, and its heat of detonation (10.15 kJ·g⁻¹) was higher than that of common ammonium nitrate explosives, such as octogen (HMX), hexogene (RDX), and 2, 4, 6-trinitrotoluene (TNT), indicating that 1 is a promising high-energy and insensitive material.     

An empirical method for predicting detonation pressure of CHNOFCl explosives

This paper describes a new method for prediction of the Chapman-Jouguet detonation pressures of CHNOFCl explosives using the heat of detonation, Q_det, the number of moles of gaseous products of detonation per gram of explosive, α, and the average molecular weight of gaseous products, M. The equation has the form: P_CJ=15.88α(MQ_det)^1/2ρ₀²−11.17, where P_CJ is the Chapman-Jouguet detonation pressure and ρ₀ the loading density. Calculated P_CJ by this procedure show good result with respect to measured detonation pressure for any pure or mixture of ideal and some of less ideal CHNOFCl explosives at ρ₀>0.8 g/cm³.     

均四嗪衍生物结构、生成焓及爆轰性能的理论研究

运用DFT-w B97/6-31+G**方法对23种1,2,4,5-四嗪衍生物的几何结构、自然键轨道(NBO)和生成焓(EOF)进行研究,并在此基础上运用Kamlet-Jacobs方程估算衍生物的爆轰性能,得到其爆速在6.69~9.37 km/s之间;基于统计热力学,求得部分标题化合物在200~800 K温度范围内的热力学性质,随温度T升高,热容Cp、熵Sm及焓Hm逐渐增大。根据最小键级理论,C-R(取代基)键和N-R键可能是1,2,4,5-四嗪衍生物高温裂解的热引发键。综合分析,基团-NO2、-N3和-N=N-有助于提高四嗪衍生物的生成焓和爆轰性能,3,6-二硝基-1,2,4,5-四嗪和3,6-二偶氮基-二硝基-1,2,4,5-四嗪从能量、爆轰性能上可以作为高能量密度材料候选物。