Correspondence between two types of rating indices for the heavy weight floor impact sound insulation of residential buildings

Of the two types of rating indices for the heavy weight floor impact sound insulation, the method of utilizing a rubber ball impact source combined with A-weighted sound level and the method utilizing a tire impact source combined with L-rating curve, the advantage of the former has been reported. In order to extend the advantage, the possibility was studied of estimating the rating utilizing the rubber ball impact source, based on the measurement results utilizing the tire impact source, especially for the case of a double leaf wooden floor. The correlation between the indices is not high enough to estimate one of them directly from the other with an accuracy not incorrectly estimating the rating grade of 5 dB step. The use of predictor variables, such as the special specifications of the double leaf wooden floor, for example, the use of sound insulation sheet, and the floor impact sound levels in the 31.5-Hz, 63-Hz and 125-Hz bands, is possibly able to increase the accuracy. Three principal types of multiple regression equation were derived through the analysis of measurement results in existing residential buildings.     

Differences in Self-Rated, Perceived, and Acoustic Voice Qualities Between High- and Low-Fatigue Groups

Objectives

The present study was performed to examine which factors among self-rated scales, perceptual evaluations, and acoustic parameters, calculated from sustained vowels, are reliable indicators of physical and mental fatigues.

Methods

A total of 73 volunteers (male:female, 52:21), aged 19–24 years, were enrolled in this study. We defined the high- and low-fatigue groups using the Chalder Fatigue Scale score. For assessment of self-rated symptoms, each subject was asked to complete Voice Handicap Index (VHI) and Voice Rating Scale (VRS). For perceptual evaluations, three clinicians assessed each subject’s vocal quality on the Grade, Roughness, Breathiness, Asthenia, Strain Scale. For acoustic analysis, each subject was asked to produce sustained vowels /a/, /e/, /i/, /o/, and /u/ for 3 seconds. Then, the habitual fundamental frequency (F₀), jitter, shimmer, F₀ tremor, mean F₀, standard deviation of F₀, maximum F₀, minimum F₀, normalized noise energy, harmonic-to-noise ratio (HNR), signal-to-noise ratio (SNR), amplitude tremor, and ratio within 2–4 kHz were calculated using Dr. Speech software.

Results

In men, VHI, VRS, F₀ tremor, shimmer, HNR, SNR, and amplitude tremor were related to mental fatigue. In women, only VHI was related to physical fatigue, and none of the acoustic parameters was related to the fatigue score. Perceptual evaluations were not related to fatigue in men or women.

Conclusions

These findings suggest that self-rated symptoms and acoustic parameters related to voice quality are indicative of mental fatigue, and these features are prominent in men.     

Epidemiological Study of Voice Disorders Among Teaching Professionals of La Rioja, Spain

The purpose of the present study was to calculate the prevalence and incidence of voice disorders among teaching staff and find out the associated occupational risk factors. A case-control study was performed with 905 teachers, 579 cases and 326 controls; 492 were randomly selected and 413 volunteered. All teachers were asked to fill out a standard questionnaire. Next, a complete laryngeal exam was performed including a general ear, nose, and throat evaluation and videolaryngostroboscopy. The prevalence of voice disorders among teaching staff was 57%. The most prevalent lesions were vocal overstrain (18%), nodular lesions (14%), and hyperfunctional dysphonia (8%). The incidence rate was 3.87 new cases per year per 1000 teachers. Women had organic lesions three times more than men (odds ratio [OR]: 3.52, confidence interval [CI]: 2.04-6.09). However, men had chronic laryngitis three times more than women (OR: 2.93, CI: 1.50-5.71) and functional dysphonia nearly twice more than women (OR: 1.81, CI: 1.21-2.69). We find a significant risk of suffering voice disorders in teachers who smoke daily (OR: 2.31, CI: 1.58-3.37) and who drink several cups of coffee or tea (OR: 1.87, CI: 1.36-2.56). It is advisable to carry out an annual evaluation of all teaching staff on account of the high prevalence of voice disorders among them.     

一类带干扰风险模型的推广

In this paper, the cLassicaL risk process perturbed by diffusion is genera]ized by alLowing for “size fluctuation“ and the rtl[n probabiLity for this new model is dlscussed.     

Designing a contaminated soil sampling strategy for human health risk assessment

Human health risk assessment is a site-based approach used to identify the potential health hazards which are induced by an old site contamination. For a proper evaluation of the daily doses of contaminants to which people will be exposed given the future occupation of the site, both a characterization and a quantification of soil pollution are needed. Such information can be provided by soil sampling. Thus the choice of the location, the number, depth and type of soil samples is very important and ought to follow a well-defined strategy. A review of contaminated site sampling practices in Europe and North America could not identify any completely formalized sampling strategy for human health risk assessment. On the contrary there are several approaches which can be roughly classified into two categories: a systematic sampling scheme over the whole site, on the one hand, and a sampling design driven by an initial knowledge of the contamination sources and fitted to the suspected pollution pattern, on the other. The first approach provides a complete coverage of the site but it may be rather expensive and entail useless sampling. The performance of the second depends on the quality of prior information. Actually both methods can be combined as explained hereafter. In view of the specificity of each site, the requirements of health risk assessment and the time and cost constraints, it seems difficult to work out a typical soil sampling strategy suitable for all sites. However, some recommendations can be made according to the site dimensions, the nature, degree and heterogeneity of contamination, and the (future) use of the site. The scientist should thus rely on a thorough examination of all available information (site history, geology and hydrogeology, soil properties, contaminants behaviour , etc.) to delimit contaminated areas as homogeneous as possible and then distribute the sampling points (e.g.using a sampling grid). They should also take the potential exposure paths into account in order to define the areas and soil strata to be sampled as a priority. Statistical and geostatistical tools can be helpful for formulating a sampling strategy as well as for interpreting the collected data. Received: 7 December 2001 Accepted: 24 February 2002     

General linear formulations of stochastic dominance criteria

We develop and implement linear formulations of general Nth order stochastic dominance criteria for discrete probability distributions. Our approach is based on a piece-wise polynomial representation of utility and its derivatives and can be implemented by solving a relatively small system of linear inequalities. This approach allows for comparing a given prospect with a discrete set of alternative prospects as well as for comparison with a polyhedral set of linear combinations of prospects. We also derive a linear dual formulation in terms of lower partial moments and co-lower partial moments. An empirical application to historical stock market data suggests that the passive stock market portfolio is highly inefficient relative to actively managed portfolios for all investment horizons and for nearly all investors. The results also illustrate that the mean–variance rule and second-order stochastic dominance rule may not detect market portfolio inefficiency because of non-trivial violations of non-satiation and prudence.     

Comments on the editorial "On quality of a measurement result"

A recent editorial reviewed several definitions of quality. The limitations of these definitions are discussed here, with a simple suggestion to define quality as meeting a specified error rate whereby the required elements for an error rate are listed. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board and the Publisher.     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996