Volumetric properties of ethanol–water mixtures under high temperatures and pressures

The densities of ethanol and ethanol–water mixtures were measured with a vibrating tube densimeter at 25.0, 50.0 and 75.0 °C in the pressure range from 0.10 to 40.00 MPa. Densities were correlated using an empirical model. Partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures were calculated from obtained densities. This study reports the dependence of densities, partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures on composition, temperature and pressure.     

立方氮化硼单晶紫外吸收光谱的研究

对于在高温、高压下合成的人工立方氮化硼(cBN)片状单晶进行了紫外吸收光谱和第一性原理的能带结构研究。实验中采用了UV WINLAB光谱分析仪,数据分析由MOLECULAR SPECTROSCOPY软件进行拟合运算,通过特殊的石英夹具对样品的测试表明cBN的紫外吸收波长限为198 nm,带隙为6.26 eV。结合第一性原理计算的cBN的能带结构和电子态密度的计算,可以证实导致紫外光吸收的过程是价带电子吸收光子到导带的间接跃迁。文章实验结果与目前报道的cBN能带结构中禁带宽度的吻合较好,表明cBN具有良好的紫外特性,是一种具有发展前景的紫外光电和高温半导体器件材料。     

pH-Dependent Release from Monoolein Cubic Phase Containing Hydrophobically Modified Chitosan

Monoolein (MO) cubic phase incorporating hydrophobically modified chosan (Hm chitosan) was prepared to obtain a pH-dependent release. Following calorimetric study, Hm chitosan had little effect on the crystal structure of MO cubic phase under acidic condition where Hm chitosan is readily soluble. At a higher pH (e.g., pH 9.0), however, the crystal structure of MO cubic phase was disturbed, possibly due to the insolubilization of Hm chitosan at the alkali condition. Whether the dye included in the cubic phase is anionic (amaranth) or cationic (methylene blue), the release from the cubic phase was suppressed as the pH of release medium increased. The structural change of cubic phase caused by the insolubilization of Hm chitosan, or the blockage of the water channel of the cubic phase by precipitated Hm chitosan would be responsible for the suppressed released.     

Infrared and Raman spectra of magnesium ammonium phosphate hexahydrate (struvite) and its isomorphous analogues. IX: Spectra of protiated and partially deuterated cubic magnesium caesium phosphate hexahydrate

Infrared and Raman spectra of cubic magnesium caesium phosphate hexahydrate, MgCsPO₄·6H₂O (cF100), and its partially deuterated analogues were analyzed and compared to the previously studied spectra of the hexagonal analogue, MgCsPO₄·6H₂O (hP50). The vibrational spectra of the cubic and hexagonal dimorphic analogues are similar, especially in the regions of HOH stretching and bending vibrations. In the difference IR spectrum of the slightly deuterated analogue (<5% D), one distinctive band appears at 2260 cm⁻¹ with a small shoulder at around 2170 cm⁻¹, but only one band is expected in the region of the OD stretchings of isotopically isolated HDO molecules. The small weak band could possibly result from second-order transitions (a combination of HDO bending and some libration of the same species) rather than statistical disorder of the water molecules. By comparing the IR spectra in the region of external vibrations of water molecules of the protiated compound recorded at RT (room temperature) and at LNT (liquid nitrogen temperature) and those in the series of the partially deuterated analogues, it can be stated with certainty that the bands at 924 and 817 cm⁻¹ result from librations of water molecules, rocking and wagging respectively. And the band at 429 cm⁻¹ can be safely attributed to a stretching Mg–O_w mode. In the ν₃(PO₄) and ν₄(PO₄) region in the infrared spectra, one band in each is observed, at 995 and 559 cm⁻¹, respectively. In the region of the ν₁ modes, in the Raman spectrum of the protiated compound, one very intense band was observed at 930 cm⁻¹ which is only insignificantly shifted to 929 cm⁻¹ in the spectrum of the perdeuterated compound. The band at 379 cm⁻¹ in the Raman spectrum could be assigned to the ν₂(PO₄) modes. With respect to the phosphate ion vibrations, the comparison between the two polymorphic forms of MgCsPO₄·6H₂O and their deuterated compounds shows that ν₁(PO₄) and ν₃(PO₄) appear at lower wavenumbers in the cubic phase than in the hexagonal phase. These data are in full agreement with the lower repulsion potential at the cubic lattice sites compared with that for the hexagonal lattice sites.     

Ferrimagnetic behaviors in a double-wall cubic metal nanotube

A double-wall cubic metal nanotube consists of the ferromagnetic spin-1 inner shell and spin-3/2 surface shell. It is of the ferrimagnetic exchange coupling between two shells. Considering the single-ion anisotropy and transverse field exist together, the magnetization, the initial susceptibility, the internal energy and the specific heat have been investigated by using the effective-field theory with correlations. Some interesting phenomena have been found in the thermal variations of the system. Magnetization appears two or three compensation points in certain parameters. It is an unconventional ferrimagnetic behavior in the nanotube. The shapes of total magnetization and the initial susceptibility are great influenced by the surface exchange coupling, surface single-ion anisotropy and surface transverse field. Some results of nanotube may have potential applications in different research fields, such as electronics, optics, mechanics, and even biomedicine and molecular devices.     

Nonlinear dynamics of imperfectly-supported pipes conveying fluid

In this paper, the nonlinear dynamics of a pipe imperfectly supported at the upstream end and free at the other and conveying fluid is investigated. The imperfect support is modelled via cubic translational and rotational springs. The equation of motion is obtained via Hamilton’s principle for an open system, and the Galerkin method is used for discretizing the resulting partial differential equation. The dynamics of a system with either strong rotational or strong translational stiffness is examined in details. Numerical results show that similarly to a cantilevered pipe, the system undergoes a supercritical Hopf bifurcation leading to period-1 limit cycle oscillations. The Hopf bifurcation may, however, occur at a much lower flow velocity compared to the perfect system. At higher flow velocities, quasi-periodic and chaotic-like motions may be observed. The amplitude of transverse displacement is generally much higher than that for a cantilevered pipe, mainly due to large-amplitude rigid-body motion. In addition, effects of the mass ratio, internal dissipation, hardening- or softening-type nonlinearity, as well as concentrated- or distributed-type nonlinearity on the dynamics of the system are examined.     

Non-bilayer formation in the DPPE-DPPG vesicle system induced by deep rough mutant of Salmonella minnesota R595 lipopolysaccharide

The vesicle system consisting of 80 mol% dipalmitoylphosphatidylethanolamine (DPPE) and 20 mol% dipalmitoylphosphatidylglycerol (DPPG) undergoes to structural changes caused by various concentrations of Salmonella minnesota R595 lipopolysaccharide (LPS). The phenomenon was investigated by methods applying small- and wide-angle X-ray scattering (SAXS and WAXS), calorimetry (DSC) and freeze-fracture. In the low LPS concentration regime (investigated at 0.02 LPS/DPPE–DPPG molar ratio) a phase separation was observed. Two kind of domains are formed which are rich and poor in DPPE and in these domains cubic and lamellar structures are present, respectively. Increasing the LPS concentration up to 0.1 LPS/DPPE–DPPG molar ratio the phase separation is more expressed and the temperature domains of the phase transitions are more different. Increasing the temperature chain melting of the lamellar phase occurs first and destruction of the cubic phase is observed later. At high LPS concentration (equimolar ratio of LPS/DPPE–DPPG), where this amphiphilic molecule cannot be considered any more a guest molecule, the cubic structure dominates the phase behaviour of the LPS molecules.     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.     

一类具有两个抛物线解的中心对称三次系统存在极限环的条件

本文给出了具有两个抛线解的中心对称三次系统存在在极限环的条件，它可能也是充要条件。