Diode-pumped 671 nm laser frequency doubled by CPM LBO

A design of diode-pumped high-efficiency Nd:YVO₄/LBO red laser is reported. Using critical phase-matching (CPM) LBO, 671 nm red laser was obtained from 1342 nm light by intracavity frequency doubling. With an incident pump laser of 800 mW, using type-I and type-II CPM LBO, 97 and 52 mWTEM₀₀ mode red laser outputs were obtained, with optical-to-optical conversion efficiencies of up to 12.1% and 6.5%, respectively.     

在CPM非稳腔Nd:YAG激光器中用被—被动锁模方法选单脉冲的探讨

在CPM Nd:YAG非稳腔激光器中,我们使用透过率较大的可饱和吸收体使单脉冲序列中的脉冲个数减少到3—5个,在输出的单序列中再使用非线性介质进行处理,可以得到比较接近的单脉冲输出。     

扑尔敏分子的密度泛函理论研究

马来酸氯苯那敏（chlorpheniramine maleate,CPM）,化学名为2-[对-氯-α-（二甲氨基）乙基丁苯基], 又名扑尔敏,分子式C20H23ClN2O4,本文采用密度泛函理论（density functional theory,DFT）,在M06-2X/6-311+g(d,p)水平上对扑尔敏分子的两种可能的结构进行了优化,优化结果显示分子基态结构具有C1对称性,分子由50个原子组成,共有144个简正自由度,所有的简正振动模式均具有拉曼活性。计算结果表明,吡啶环和苯环所在平面的二面角是92.1°,丁烯二酸和苯环所在平面的二面角是-174.5°。O40-H41和H41-N25键长分别为0.103nm、0.162nm,O40-H41-N25键角为175.29°,采用多功能波函数Multiwfn软件处理结果表明用于表征氢键强度的CVB指数（CVB指数越负,通常氢键越强。）为-0.2268,结果表明O40-H41-N25原子之间存在氢键,马来酸通过羧基上的氢原子和氯苯那敏吡啶环上的N原子通过氢键作用相结合;通过频率计算,获得了扑尔敏分子的拉曼光谱,并利用势能函数分布（PED）对拉曼光谱进行了指认,对谱图信息比较丰富的200-1800cm-1波段进行了分析归属;此外分析并讨论了扑尔敏分子的前线轨道,扑尔敏分子的最高占据轨道HOMO和最低未占据分子轨道LUMO轨道能量分别为-7.95ev、-1.05ev,能级差为6.90ev。为扑尔敏分子的光谱测定和电子结构分析提供了理论基础。     

Analysis of critical paths in a project network with fuzzy activity times

This paper proposes an approach to critical path analysis for a project network with activity times being fuzzy numbers, in that the membership function of the fuzzy total duration time is constructed. The basic idea is based on the extension principle and linear programming formulation. A pair of linear programs parameterized by possibility level α is formulated to calculate the lower and upper bounds of the fuzzy total duration time at α. By enumerating different values of α, the membership function of the fuzzy total duration time is constructed, and the fuzzy critical paths are identified at the same time. Moreover, by applying the Yager ranking method, definitions of the most critical path and the relative degree of criticality of paths are developed; and these definitions are theoretically sound and easy to use in practice. Two examples with activity times being fuzzy numbers of L-R and L-L types discussed in previous studies are solved successfully to demonstrate the validity of the proposed approach. Since the total duration time is completely expressed by a membership function rather than by a crisp value, the fuzziness of activity times is conserved completely, and more information is provided for critical path analysis.     

Critical comparison of radiometric and mass spectrometric methods for the determination of radionuclides in environmental, biological and nuclear waste samples

The radiometric methods, alpha (α)-, beta (β)-, gamma (γ)-spectrometry, and mass spectrometric methods, inductively coupled plasma mass spectrometry, accelerator mass spectrometry, thermal ionization mass spectrometry, resonance ionization mass spectrometry, secondary ion mass spectrometry, and glow discharge mass spectrometry are reviewed for the determination of radionuclides. These methods are critically compared for the determination of long-lived radionuclides important for radiation protection, decommissioning of nuclear facilities, repository of nuclear waste, tracer application in the environmental and biological researches, these radionuclides include ³H, ¹⁴C, ³⁶Cl, ⁴¹Ca, ^59,63Ni, ^89,90Sr, ⁹⁹Tc, ¹²⁹I, ^135,137Cs, ²¹⁰Pb, ^226,228Ra, ²³⁷Np, ²⁴¹Am, and isotopes of thorium, uranium and plutonium. The application of on-line methods (flow injection/sequential injection) for separation of radionuclides and automated determination of radionuclides is also discussed.     

CPM网络中机动时间的使用效率及应用

本文研究CPM网络计划中总时差和单时差的使用效率问题及在项目管理中的应用.文章首先探讨了总时差和自由时差的使用对CPM网络中新关键路线形成的影响,得出结论:一般情况下一条路线上各工序分别使用自由时差的方式比某个工序使用总时差的方式具有更高的使用效率.文章随后对这一结论进行了科学性证明,并根据这个结论提出了项目管理中一种运用自由时差节约成本的方法,这种方法能帮助项目管理者提高机动时间使用效率.     

计划评审技术的改进

由于计划评审技术存在的不足,导致项目管理存在一定的偏差.对计划评审技术中的活动期望时间和方差的公式做了改进,从而提高了项目管理的精确性.还指出计划评审技术中活动期望时间和方差的计算公式,实际上是改进后公式的特殊情形.     

一种输出三波长超短光脉冲的激光源

利用对撞脉冲锁模非稳腔Ｎｄ：ＹＡＧ激光器，采用ＫＴＰ非线性晶体作腔外倍频，结合受激拉曼散射技术，在一台锁模激光器同时得到１．０６μｍ，０．５３μｍ，０．６３μｍ超短光脉冲的输出。     

基于CPM原理和Dijkstra算法的SPM网络计划模型及性质

CPM(关键路线法)网络计划适用于分析工序间存在严格紧前关系(任意工序只能在它的所有紧前工序都结束时才能开始)的进度计划.针对工序间不存在严格紧前关系(任意工序只要其紧前工序中的一个结束它就可以开始)的进度计划,以CPM原理和Dijkstra算法为基础,提出SPM(最短路线法)网络计划以及拟机动时间概念,根据不同的建模原理,建立了两个SPM网络计划模型,并给出了其建立方法以及各模型拟机动时间的求法,分析了每个模型的性质,最后通过算例对其中的一类模型进行了验证.     

关键线路变迁分析方法及其应用

传统的关键路线法(CPM),计算工序的诸多时间参数来确定工期与关键路线,对于简单网络方便可行.但对于大型的复杂网络,必然存在时间参数多、计算量大等问题;加之,工程项目具有普遍的复杂性,时常需要进行工期优化,关键线路可能发生变迁.为了简化计算,运用0-1规划方法,在WinQSB环境下建立适应不同规模的网络计划参数计算的数学模型并快速求解,再通过目标函数的灵敏度分析,确定变量的变化范围,解决关键线路变迁问题.算例表明,提出的方法无需重新计算便可快捷地断定关键线路是否发生变迁.