Thermal degradation of two liquid fuels and detonation tests for pulse detonation engine studies

The use of liquid fuels such as kerosene is of interest for the pulse detonation engine (PDE). Within this context, the aim of this work, which is a preliminary study, was to show the feasibility to initiate a detonation in air with liquid-fuel pyrolysis products, using energies and dimensions of test facility similars to those of PDEs. Therefore, two liquids fuels have been compared, JP10, which is a synthesis fuel generally used in the field of missile applications, and decane, which is one of the major components of standard kerosenes (F-34, Jet A1, ...). The thermal degradation of these fuels was studied with two pyrolysis processes, a batch reactor and a flow reactor. The temperatures varied from 600°C to 1,000°C and residence times for the batch reactor and the flow reactor were, respectively, between 10–30 s and 0.1–2 s. Subsequently, the detonability of synthetic gaseous mixtures, which was a schematisation of the decomposition state after the pyrolysis process, has been studied. The detonability study, regarding nitrogen dilution and equivalence ratio, was investigated in a 50 mm-diameter, 2.5 m-long detonation tube. These dimensions are compatible with applications in the aircraft industry and, more particularly, in PDEs. Therefore, JP10 and decane were compared to choose the best candidate for liquid-fuel PDE studies. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31 – August 5, 2005.     

批量离子交换层析和凝胶过滤层析在类人胶原蛋白I纯化中的应用

研究了利用批量离子交换层析与凝胶过滤层析相结合的方法纯化类人胶原蛋白I的最佳条件。分别考察了不同离子交换树脂、缓冲溶液pH、离子强度、进料蛋白浓度对批量离子交换的影响,以及不同凝胶过滤介质对凝胶过滤层析的影响。结果表明,采用阴离子交换树脂DEAE52吸附杂蛋白,缓冲液pH为7.0,NaCl浓度为0.2mol/L,进料蛋白浓度为40mg/mL,并采用凝胶过滤介质SephadexG-100进一步纯化后,类人胶原蛋白I的纯度可达到98.2%,总纯化倍数为3.1,总回收率为80.6%。SDS-PAGE分子量分析和N末端氨基酸序列分析均表明纯化后的类人胶原蛋白I与基因设计一致。     

Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

Kinetic and thermodynamic studies on the adsorption behavior of Rhodamine B dye on Duolite C-20 resin

The adsorption behavior of Rhodamine B dye from aqueous solutions was investigated onto the cation-exchange resin, Duolite C-20 (hydrogen form). The effects of various experimental factors; sorbent amount, contact time, dye concentration and temperature, were studied by using the batch technique. Lagergren pseudo-first-order equation shows good applicability with high correlation coefficients for all ranges of initial dye concentrations and at different temperatures. This equation was used to describe the kinetics of the dye adsorption process. The adsorption constants were evaluated by using both the Langmuir and Freundlich adsorption isotherm models. Thermodynamic parameters were obtained and it was found that the adsorption of Rhodamine B dye onto Duolite C-20 resin was an endothermic and spontaneous process at the temperatures under investigation.     

Optimal strategy policy in batch arrival queue with server breakdowns and multiple vacations

This paper considers a like-queue production system in which server vacations and breakdowns are possible. The decision-maker can turn a single server on at any arrival epoch or off at any service completion. We model the system by an M^[x]/M/1 queueing system with N policy. The server can be turned off and takes a vacation with exponential random length whenever the system is empty. If the number of units waiting in the system at any vacation completion is less than N, the server will take another vacation. If the server returns from a vacation and finds at least N units in the system, he immediately starts to serve the waiting units. It is assumed that the server breaks down according to a Poisson process and the repair time has an exponential distribution. We derive the distribution of the system size through the probability generating function. We further study the steady-state behavior of the system size distribution at random (stationary) point of time as well as the queue size distribution at departure point of time. Other system characteristics are obtained by means of the grand process and the renewal process. Finally, the expected cost per unit time is considered to determine the optimal operating policy at a minimum cost. The sensitivity analysis is also presented through numerical experiments.     

Consecutive customer losses in regular and oscillating <Emphasis Type="Italic">M</Emphasis><Superscript><Emphasis Type="Italic">X</Emphasis></Superscript>/<Emphasis Type="Italic">G</Emphasis>/1/<Emphasis Type="Italic">n</Emphasis> systems

We derive fast recursions to compute the probability that k or more consecutive customer losses take place during a busy period of a queue, the so called k-CCL probability, for regular and oscillating M ^X /G/1/n systems.     

Batch processor sharing with hyper-exponential service time

We study the Processor Sharing queueing model with a hyper-exponential service time distribution and Poisson batch arrival process. In the case of the hyper-exponential service time distribution we find an analytical expression for the expected conditional response time function and obtain an alternative proof of its concavity with respect to the service time.     

A two-level supply chain with partial backordering and approximated Poisson demand

We consider a two-level supply chain with a number of identical, independent ‘retailers’ at the lower echelon and a single supplier at the upper echelon controlled by continuous review inventory policy (R, Q). Each retailer experiences Poisson demand with constant transportation times. We assume constant lead time for replenishing supplier orders from an external warehouse to the supplier and unsatisfied retailer orders are backordered in the supplier. We assume that the unsatisfied demand is partially backordered in the identical retailers. The partially backordering policy is implemented in the identical retailers using an explicit control parameter ‘b’ which limits the maximum number of backorders allowed to be accumulated during the lead time. We develop an approximate cost function to find optimal reorder points for given batch sizes in all installations, the optimal value of b in the identical retailers and the related accuracy is assessed through simulation.