有势场逆问题的边界元法

本文给出了位势方程逆问题的一种最小二乘边界元解法。控制方程为Ｌａｐｌａｃｅ方程，但一部分边界上未给出任何边值，而只在某些内点上给出了势函值。这一问题在数学上属不适定问题，但在一定条件下存在唯一解。本文同时给出了一种估计解的可靠性的方法。数值试验表明，这类逆问题采用边界元法是非常有效的。     

复杂载荷三维裂纹分析双重边界元法

提出可用于高温、高转速状态下的热动力机械三维含裂构件热弹性分析方法——双重边界元法.首先建立了考虑温度及离心载荷的双重边界积分方程组,并对边界积分方程组的选取及适用范围进行了讨论。然后提出角非快调元模型离散技术。接着提出超奇异积分方程分析去除奇异性方法及数值积分技术.数值算例表明计算结果与有关权函数解十分吻合,说明了用双重边界元法计算复杂载荷条件下三维应力强度因子的有效性.还讨论了有关热应力强度因子权函数解的适用范围.     

关于边界元方法中柯西主值积分的探讨

本文对边界元方法中的各类积分根据其奇异性作分类，并对主值积分的收敛条件、变量替换等进行了讨论，又给出了变替换附加项显式。文中提供的主值积分配项消奇术在边界元方法中是有普遍意义的。     

A boundary integral formulation for elastically deformable particles in a viscous fluid

This paper reports a formulation and implementation of a mixed (both direct and indirect) boundary element method using the double layer and its adjoint in a form suitable for solving Stokes flow problems involving elastically deformable particles. The formulation is essentially the Completed Double Layer Boundary Element Method for solving an exterior traction problem for the surrounding fluid or solid phase, followed by an interior displacement, and a mobility problem (if required) for the elastic particles. At the heart of the method is a deflation procedure that allows iterative solution strategies to be adopted, effectively opens the way for large-scale simulations of suspensions of deformable particles to be performed. Several problems are considered, to illustrate and benchmark the method. In particular, an analytical solution for an elastic sphere in an elongational flow is derived. The stresslet calculations for an elastic sphere in shear and elongational flows indicate that elasticity of the inclusions can potentially lead to positive second normal stress difference in shear flow, and an increase in the tensile resistance in elongational flow.This work is supported by a grant from the Australian Research Grant Council. X-J F wishes to acknowledge the support of the National Natural Science Foundation of China.     

Modelling of discontinuities through dipole distribution

An indirect boundary element method using dipole distribution is employed in order to model discontinuities inside the flow region. The problem of flow under a dam is treated with a sheet-pile in its foundation. The discontinuity across the sheet-pile is demonstrated, a general boundary element procedure for a mixed problem is outlined and the coefficients of the linear system are given in analytical form. Very good agreement with existing analytical results is obtained.     

Coupled boundary element method and finite difference method for the heat conduction in laser processing

This paper is presented as a way to model transient heat conduction in a 3-D axisymmetric case where large rates of heat fluxes are applied on the surfaces as done in the case of laser processing. This would result in large temperature gradients in a small area irradiated by the laser on the incident surface that could also reach melting and subsequent vaporization. BEM can handle large fluxes very easily and it also can be formulated if needed to incorporate the moving boundary problem in a unique manner while on the other hand FDM is a fast and efficient method. For these reasons a coupled BEM–FDM method is formulated to simulate the heat conduction process. In the BEM method linear elements for the boundary and quadratic elements for the domain were used. The integrals in BEM were integrated in time using the asymptotic expansion for the modified Bessel functions in the Green’s function. To further improve the accuracy, special techniques were employed in the spatial integration. As for the FDM formulation, a flux conservation scheme with a 4th order formula for the fluxes was used. The FDM and BEM were coupled at the interface by the temperature from the FDM formulation being imposed on the BEM and the flux from the BEM being utilized by the FDM elements near to the interface. To advance in time, the Crank–Nicholson scheme was used on the FDM directly and due to coupling indirectly on the BEM. The relative errors for the simulation of constant and variable flux cases demonstrate the successful nature of the numerical model.     

三维非线性有限元与弹性边界元耦合数值方法

本文系统地讨论了以下三个问题:(1) 有限元与边界元耦合中的几个数值问题,其中包括:边界积分方程的凝聚、等效刚度矩阵的对称化及面力不连续的处理;(2) 弹塑性有限元与弹性边界元的耦合;(3) 弹粘塑性有限元与弹性边界元的耦合及数值计算稳定性条件。     

含二十二烷基聚氧乙烯醚甲基丙烯酸酯功能单体的缔合型乳液增稠剂的制备及表征

以甲基丙烯酸、丙烯酸乙酯、邻苯二甲酸二烯丙酯和不同量的功能单体二十二烷基聚氧乙烯醚甲基丙烯酸酯(BEM)为原料,采用半连续乳液聚合方法合成了疏水改性碱溶性缔合型增稠剂乳液.测定了增稠剂乳液的粘度、透光率、乳胶粒粒径及其分布等性能,考察了不同固含量下乳液粘度和透光率随pH的变化情况.结果表明随着BEM用量的增加,乳胶粒粒径逐渐增大.随着pH值的增加,乳液的粘度首先迅速升高,然后缓慢下降.与不含BEM的增稠剂乳液相比,当乳液固含量大于0.5%,BEM含量占单体量低于5.0wt%时,该缔合型增稠剂的增稠效果和抗剪切性有显著提高,BEM含量较高(8.0wt%或更高)时反而使增稠效果和抗剪切性变差.在此基础上研究了增稠剂对苯丙乳液的增稠效应,结果显示BEM含量占单体量的2.5wt%时,对苯丙乳液的增稠作用最好.与使用功能单体三苯乙基苯酚聚氧乙烯醚甲基丙烯酸酯改性的增稠剂相比,含BEM的增稠剂在BEM用量较少的情况下就能起到明显的增稠效果.     

A symmetric BEM–FEM method for an axisymmetric eddy current problem

This paper deals with the numerical solution of the time-harmonic eddy current model in an axisymmetric unbounded domain. To this end, a new symmetric BEM–FEM formulation is derived and also analyzed. Moreover, error estimates for the corresponding discretization are proven.     

Analysis of a kinematic dynamo model with FEM–BEM coupling

We consider a kinematic dynamo model in a bounded interior simply connected region Ω and in an insulating exterior region . In the so‐called direct problem, the magnetic field B and the electric field E are unknown and are driven by a given incompressible flow field w . After eliminating E , a vector and a scalar potential ansatz for B in the interior and exterior domains, respectively, are applied, leading to a coupled interface problem. We apply a finite element approach in the bounded interior domain Ω, whereas a symmetric boundary element approach in the unbounded exterior domain Ω^c is used. We present results on the well‐posedness of the continuous coupled variational formulation, prove the well‐posedness and stability of the semi‐discretized and fully discretized schemes, and provide quasi‐optimal error estimates for the fully discretized scheme. Copyright © 2013 John Wiley & Sons, Ltd.