An investigation of the Al2O3-CdSe interface in accumulation

The Al₂O₃−CdSe interface of a thin-film transistor is investigated in the frequency range 30 Hz-30 kHz under weak depletion and accumulation. The surface states are, most likely, located in the insulator Al₂O₃ with a concentration varying from 4·10¹⁸ to 10¹⁹ cm⁻³ eV⁻¹. The surface states have a negligible influence on the thin-film transistor operation.     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Global stability of the Armstrong-Frederick model with periodic biaxial inputs

The paper is concerned with the study of plasticity models described by differential equations with stop and play operators. We suggest sufficient conditions for the global stability of a unique periodic solution for the scalar models and for the vector models with biaxial inputs of a particular form, namely the sum of a uniaxial function and a constant term. For another class of simple biaxial inputs, we present an example of the existence of unstable periodic solutions. The paper was written during the research stay of D. Rachinskii at the Technical University Munich supported by the research fellowship from the Alexander von Humboldt Foundation. His work was partially supported by the Russian Science Support Foundation, Russian Foundation for Basic Research (Grant No. 01-01-00146, 03-01-00258), and the Grants of the President of Russia (Grant No. MD-87.2003.01, NS-1532.2003.1). The support is gratefully acknowledged.     

On Some Integral Equations in Hilbert Space with an Application to the Theory of Elasticity

A Volterra type integral equation in a Hilbert space with an additional linear operator L and a spectral parameter depending on time is considered. If the parameter does not belong to the spectrum of L unconditional solvability of the considered problem is proved. In the case where the initial value of the parameter coincides with some isolated point of the spectrum of the operator L sufficient conditions for solvability are established. The obtained results are applied to the partial integral equations associated with a contact problem of the theory of elasticity.     

Commutant Lifting Theorem for the Bergman Space

The central question of this paper is the one of finding the right analogue of the Commutant Lifting Theorem for the Bergman space L_a². We also analyze the analogous problem for weighted Bergman spaces L_a,α², − 1 < α < ∞.     

SEPARATING SCN~- FROM DESULPHURIZATION WASTE SOLUTION OF COCKING PLANT BY D241 RESIN

1. INTRODUCTION In the process of coking plant, about 30%~35% sulfur is transformed to H2S and some other sulfide, which form impurity in coal gas together with NH3 and HCN. Only 0.1% H2S containing in air can lead to die, so it is very important to carry on desulphurization and decyanation with coal gas [1~3]. Currently desulphurization and decyanation craft technique have Dry Oxidation Technology, Wet Oxidation Technology and Liquid Absorption Technology [2] three main kinds. The…     

A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.     

Study of thermal currents in powder β-spodumene ceramics doped with Cuo, FeO and TiO2

Ternary-phase ceramic system of Li₂O Al₂O₃ 4SiO₂ doped with CuO, FeO and TiO₂ has been prepared and subjected to dc electrical conductivity and thermally stimulated depolarization current (TSDC) measurements as a function of temperature (30-250 °C) and field strength. The electrical conductivity results are explained by assuming both ionic and electronic conduction mechanisms coexist with different contributions over the whole temperature range of experiments. TSDC spectra have been found to be characterized by a broad intense relaxation peak, which can be attributed to an ionic charge polarization. The broad relaxation transitions are apparently a result of the nonuniform nature of this process. Activation energies are calculated for both dc electrical conductivity and TSDC according to Arrhenius equation and initial rise method, respectively.