BF_3·OEt_2对钼体系催化合成1,2-聚丁二烯的影响

在以加氢汽油为溶剂,MoCl_3(C_7H_(15)COO)_2(Mo)为主催化剂,(i-Bu)_2AlO〈O〉(Al)为助催化剂合成1,2-聚丁二烯的二元催化体系中,添加BF_3CH3·OEt_2等,对体系的催化活性影响显著。以的混合物为第三组份加入催化体系,较大幅度提高了钼系催化体系的活性。在Mo/Bd=8.0×10~(-5)(摩尔比),聚合5小时,丁二烯转化率可达到70％。初步搞清了钼催化体系合成的1,2-聚丁二烯中产生凝胶的条件,推测了凝胶的生成原因,考察了聚合条件对催化活性、分子量及微观结构含量的影响。     

1,2-聚丁二烯介电松弛的复平面分析

本文对1,2-聚丁二烯的介电松弛进行了复平面分析.结果表明,在1,2-聚丁二烯的玻璃化转变过程中,ε″(ω)与ε＇(ω)的关系满足Havriliak-Negami方程.由复平面图求出了样品的静态和光频下的介电系数,平均松弛时间和松弛时间分布参数.利用所得数据讨论了1,2-聚丁二烯在玻璃化转变过程中的构象变化、松弛时间分布和平均偶极矩等问题.     

拟合粘度曲线法研究高聚物的长链支化

本文介绍了用计算机试误法拟合粘度曲线,讨论支化参数的方法,本法可以同时确定支化临界分子量和支化程度,在此基础上可以同时得到支化参数及平均分子量、分子量分布.以聚乙烯标准参考物:SRM 1475(线型)、1476(支化物)及镍催化顺式聚丁二烯为对象介绍了上述方法.     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

交联1,4—顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶。结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶。片晶之间断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大。     

PVC/PBD-b-PMMA共混体系相容性的研究

采用ＤＭＡ和ＴＥＭ系统研究了聚丁二烯－聚甲基丙烯酸甲酯的嵌段共聚物（ＰＢＤ－ｂ－ＰＭＭＡ）与聚氯乙烯（ＰＶＣ）共混体系的相容性问题。结果表明：ＰＶＣ／ＰＢＤ－ｂ－ＰＭＭＡ共混体系具有部分相溶性。相容的程度与共混体系的组成、组分聚合物的分子量以及共聚物中ＰＢＤ和ＰＭＭＡ嵌段的比例密切相关。     

单茂钪催化剂（C5H5）Sc（CH2C6H4NMe2-o）2合成高顺式窄分布聚丁二烯

合成了6种单茂稀土催化剂Cp’LnR2(THF)n(其中,Cp’=C5H5,C5Me4SiMe3;R=CH2C6H4NMe2-o,CH2SiMe3;Ln=Sc,Y,Lu;n=0或1),并以[Ph3C][B(C6F5)4]为助催化剂,甲苯为溶剂,考察催化剂结构对丁二烯聚合活性,立体选择性,催化剂利用率以及聚合物分子量和分子量分布的影响.通过1H-NMR,13C-NMR,FTIR,GPC以及DSC对聚丁二烯进行表征,结果表明,当Cp’=C5H5,R=CH2C6H4NMe2-o,Ln=Sc,n=0时,催化剂(C5H5)Sc(CH2C6H4NMe2-o)2对丁二烯聚合活性最高,可达9600 kg-polymer/mol-Sc·h,催化剂利用率为45%,聚丁二烯顺-1,4结构含量在96%~98%之间,分子量分布窄,指数在1.3左右;以甲苯或氯苯作为聚合溶剂时,聚合活性最高,聚丁二烯分子量保持窄分布,在所有溶剂中聚丁二烯顺-1,4结构含量均达到96%以上;催化剂聚合活性随温度下降而降低,而聚合物分子量分布有变窄的趋势,温度对聚丁二烯立体选择性无明显影响;当[Bd]/[Sc]摩尔比从500增加到3000时,聚合反应1 min转化率均达到100%,聚丁二烯分子量呈可控线性增大,最高达44.6×104,且均保持聚合物窄分布.DSC谱图表明聚丁二烯Tg为-107℃,当升降温速率为10 K/min时,在-63℃和-8℃附近呈现出明显的冷结晶峰和熔融峰.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

1H和19F NMR研究镍系催化丁二烯聚合中醇类对BF3·Oet2的增溶作用

The solubility of BF₃OEt₂ in hydrogenated gasoline was improved greatly by means of premixing BF₃OEt₂ with C₃H₁₇OH in nickel catalyst system, so that the effeciency of fluorine in the system was increased markedly. It is confirmed that there was a intermolecular hydrogen bond between alcohol and BF₃OEt₂ molecules by using ¹H NMR, which was a vital factor to lead the solubilization of BF₃OEt₂ in hydrogenated gasoline. Otherwise, the caculation formula of the chemical shift ofproton in hydroxy, ¹H = xipi,was suggested in hydrogen bond system.     

环化顺1，4－聚丁二烯浓溶液的流动行为

大多数线型高聚物浓溶液的流动行为呈现非牛顿性，线型顺１，４－聚丁二烯（ＬＢＲ）亦然，而环化顺１，４－聚丁烯（ＣＢＲ）的浓溶液在浓度达１７．８％时仍表现为牛顿流体。ＣＢＲ溶液的临界缠结浓度明显地高于ＬＢＲ，ＣＢＲ分子链间的缠结效应比ＬＢＲ弱得多，这是ＣＢＲ的分子链结构特征所致。