ITER导体用铠甲现状综述

ITER超导磁体均采用管内电缆(CICC)结构,铠甲采用奥氏体无磁不锈钢无缝管。针对ITER项目,并通过对国内生产的ITER磁体铠甲性能与ITER性能设计要求值的比较分析,介绍了国内ITER PF、TF等磁体铠甲的生产现状。     

新型钝感炸药1-氧-2，6-二氨基-3，5-二硝基吡嗪的合成及表征

美国LLNL1995年合成出的代号为LLM-105的高能量密度材料，其化学名称为1-氧-2，6-二氨基-3，5-二硝基吡嗪（2，6-diamino--3，5-dinitropyrazine-1-oxide），分子结构式C4H4N605，分子量216．04，密度为1．913g／cm^3，氧平衡为-37．03％，生成热为-3．1kcal／mole，外观为亮黄色的针状晶体，比TATB的能量约高25％，且有着良好的热安定性，特性落高Dh50=117cm（RDX和HMX的特性落高30-32cm），对静电火花的刺激也很钝感。由于综合性能优异，LLM-105已经引起了国际炸药界的极大兴趣。     

Probing the Microscopic Origin of Gravity via Precision Polarization and Spin Experiments

As in other parts of physics, we advocate the interaction approach: experiments ←→ (… are influenced and their importance is determined by … and vice versa) phenomenology ←→ low-energy effective (field) theory ←→ microscopic theory to probe the microscopic origin of gravity, Using the X-g phenomenological framework, we discuss the tests of equivalence principles. The only experimentally unconstrained degree of freedom is the axion freedom. It has effects on the long-range astrophysical/cosmological propagation of electromagnetic waves and can be tested/measured using the future generation of polarization measurement of cosmic background radiation.The verification or refutal of this axionic effect will be a crucial step for constructing an effective theory and probing the microscopic origin of gravity. The interaction of spin with gravity is another important clue for probing the microscopic origin of gravity. The interplay of experiments, phenomenology and effective theory are expounded. An ideal way to reveal the microscopic origin of gravity is to measure the gyrogravitational ratio of particles, Three potential experimental methods are considered.     

Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

CL-18的合成

CL-18是根据TATB和BTF两种化合物的分子结构特征所设计并已合成的，其分子兼具TATB和BTF的分子特征，一方面，氨基的推电子效应使C-NO2键能增强，又由于氨基与硝基的氧原子间形成强的分子内和分子间氢键，更增强了分子的稳定性，因而具有优良的热稳定性和较低的感度。另一方面，分子中引入氧化呋咱基团，可明显提高化合物的密度和爆轰性能。在钝感冲击片雷管和钝感传爆药中具有潜在的应用前景。     

基于CSCW的协同编著系统的设计

讨论了计算机支持的协同工作(CSCW)的主要技术，其中重点讨论了协同编著系统设计中的并发控制技术，指出了其与传统的并发控制技术的区别。根据CSCW的基本原理设计出了一个基于Browse／Server结构的协同编著系统的系统模型。该系统模型比传统的模型更加方便了用户之间通过Internet的浏览器进行协作。     

Local Lyapunov Exponent for the Bak-Sneppen Model

The chaotic Property of the Bak-Sneppen model is studied from the local Lyapunov exponent in the same way as for dynamical nonlinear systems.Similar behaviour is found for the one- and two-dimensional Bak-Sneppen models.The Lyapunov exponents for the two cases have the same order of magnitude and both decrease at early evolution but show a slow increasing saturation at late evolution.     

Au(111)上烷烃硫醇SAMs表面应力的理论研究

应用已建立的关于金属表面吸附层中表面应力的统计热力学理论 ,计算了Au(111)上烷烃硫醇SAMs的表面应力及其与烷烃硫醇链长、吸附覆盖度的定量关系 .计算结果与实验相符 ,较好地解释了Berger等人的实验结果 ,特别是解决了在表面应力符号性质上理论与实验的矛盾 .在表面吸附层应力的多种物理起源中 ,通过底物的分子间作用力有着决定性的贡献 ,揭示了分子的吸附能间接地起着重要作用 .这与阴离子化学吸附体系Cl-/Au(111)的有关研究结果相同 .     

TATB钝感炸药的小角X射线散射实验

在北京同步辐射装置上应用同步辐射X射线小角散射技术研究TATB样品微孔状况，分析了微孔结构参数的变化。采用不同制备工艺(机械研磨、化学合成、气流细化、全结晶、粉碎)和不同存放时间的TATB粉末样品共计7份。     

放射性9C束流不同贯穿深度上的线能谱测量

为阐述放射性⁹C束流应用于治癌的物理基础, 运用一个球形生物组织等效正比计数器测量了⁹C束流不同贯穿深度上的线能谱, 得到了沿束流贯穿深度上的剂量平均线能分布. 将实验测量得到的线能谱转换成为不同传能线密度在吸收剂量中所占份额的分布, 得到了该⁹C束流在不同贯穿深度上的剂量平均传能线密度分布. 将生物组织等效正比计数器测量得到的与先前通过平行板正比计数器测量得到的该⁹C束流的剂量平均传能线密度分布进行比较, 发现: 在束流入射通道上, 两者测量数据符合很好, 而在束流Bragg峰附近⁹C离子的沉积区域, 由组织等效正比计数器测量得到的剂量平均传能线密度值大于由平行板正比计数器测量得到的值.