缅怀龚老一代“光纤人”,牢记使命,继续前进!纪念中国光学学会纤维光学与集成光学专业委员会成立36周年

20世纪50年代,光学纤维初问世之时,中国科学院学部委员龚祖同教授就敏锐地感觉到这种能"转弯抺角"传输光能的光纤是材料科技领域的一个重大革新!他决心在中国开展这方面的研究工作。1962年,龚老担任新成立的中国科学院西安光学精密机械研究所(后文简称"西安光机所")所长,立即组建了光学纤维研究室和光学玻璃研究组。     

PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine （Co2Pc2） and binuclear ferric phthalocyanine （Fe2Pc2）, were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives （Mt2Pc2） were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center of bioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.     

能谱法和催化光度法测定无机纤维中铁含量的比较研究

本文研究了铁(Ⅲ)在酸性介质中催化抗坏血酸(Vc或H2A)还原4-硝基-3’-甲基-氨基偶氮苯的褪色反应,拟定了反应的最佳条件,探讨了反应机理,建立了催化动力学测定痕量铁的新方法,该方法的检出限为2.98×10~(-11)g·mL-1,线性范围为0-200 ng·(25 mL)-1。比较了X射线能量色散谱法和催化光度法在玄武岩纤维样品中铁含量的测定,结果误差为2.89％。     

关于Hopf丛S3的几个论题

本文证明了Hopf主纤维丛S^3的几个相关的命题，指出底流形S^3上的Laplace算子在主丛上的提升是主丛S^3上的Laplace算子，以及主丛的嵌入截面具有不动点性质等。     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

局部对称共形平坦黎曼流形中的极小子流形

对局部对称共形平坦黎曼流形中具有平坦法丛的极小子流形作了一些讨论，得到了极小子流形是全测地的两个充分条件。     

Fabrication of Long-Period Fibre Gratings Using 800 nm Femtosecond Laser Pulses

Long-period fibre gratings inside standard single-mode optical communication fibres are successfully fabricated with infrared femtosecond laser pulses. The refractive index perturbations are well confined within the fibre core by choosing the proper laser focusing parameters and translation speed of the fibre during the direct laser writing process. With the self-focusing effect considered and at a constant average irradiation dose of 1.62 × 10^3 J/（cm^2μm）, the threshold intensity for fabricating long-period gratings with infrared femtosecond laser pulses is determined to be 5.13 × 10^13 W/cm2.     

Aligned ZnO Nanofibre Array Prepared by Vapour Transport in Air

An aligned zinc oxide nanofibre array has been fabricated by heating the mixture of ZnO, Ga2Oa, and graphite powders in atmosphere. The ZnO nanofibre showed a uniform size of about 150nm in diameter and 50μm in length. The nanofibres grew predominantly along one direction. Both x-ray diffraction (XRD) and Raman shift spectra show that the product is composed of ZnO with the typical hexagonal structure. The good crystallinity of these ZnO nanofibres has been verified by photoluminescence spectra with strong UV emission at 287nm and weak green band emission observed at room temperature. The component of the product was analysed by XRD,Raman shift spectrum, x-ray energy dispersion (EDX) and x-ray photoelectronic energy spectroscopy (XPS). The growth process and the characteristics can be interpreted by vapour-liquid-solid mechanism.     

New BCN Fibres for Strong Ultraviolet and Visible Light Luminescence

Novel B3CN3 fibres with a special structure have been synthesized by a pyrolysis process. High-resolution TEM analysis shows that the as-prepared B3CN3 fibres can be described as a nanofibre-interweaved network. Strong photoluminescence at 370 nm and 700 nm from the as-prepared B3 CN3 fibres are observed at room temperature, which suggests that B3 CN3 is a promising ultraviolet- and visible-light-emitting material.