玻璃陶瓷材料中Tm3+离子红外到蓝色上转换发光

系统研究了PbF2+GeO2+WO3ⅩⅣTmF3玻璃陶瓷材料中,在近红外光(1.06μm)激发下,Tm3+离子的发光特性.实验中观测到Tm3+离子的两组峰值位置分别在20920cm-1和22173cm-1的蓝色上转换发光,并证实这两组上转换发光分别与吸收三个和四个光子有关,同时建立了上转换发光的模型.为了选择最佳掺杂浓度,详细地测量了Tm3+离子峰值为20920cm-1的蓝色上转换发光强度与TmF3浓度的关系.     

980 nm激发下Er3+/Yb3+共掺杂ZrO2-Al2O3粉末的上转换发光特性

通过固相反应法制备了Er3+/Yb3+共掺杂ZrO2-Al2O3粉末的样品,并对样品在980nm激光激发下的上转换发光特性进行了研究.从发射光谱可以发现,在可见光范围内有3个强的发光带,一个位于654nm附近的红光带和两个分别位于545nm、525nm附近的绿光带,分别对应于Er3+离子的以下辐射跃迁:4F9/2→4I15/2、4S3/2→4I15/2、2H11/2→4I15/2.其中又以Er3+离子的4F9/2→4I15/2跃迁产生的红色荧光辐射最强.对其上转换发光机制进行了分析,发现这三个发光过程都是双光子过程.对样品粉末进行了XRD检测,发现ZrO2主要以立方相为主,并且计算得到了这种立方结构的晶格常数.Al2O3固溶于ZrO2中,Al3+嵌入ZrO2后产生氧空位,导致ZrO2晶体的对称性降低,这种结构变化更有利于提高上转换效率,即上转换发光强度增强.     

读者来信摘登

安康学院的方小兵老师来信指出：在《物理实验》2006年第2期上，关于“超声波波型转换与表面波的检测”一文中，出现波形与波型混用．波形和波型，虽然都是用来描述波的性质，但两者没有任何因果关系，波形由波源的振动决定，由示波器来显示，波型则是通过测量声速来判定，它的类型由波源和介质共同决定且在介面上能发生波型转换．     

Optimal Control of Non-well-posed Heat Equations

This work is concerned with Pontryagin＇s maximum principle of optimal control problems governed by some non-well-posed semilinear heat equations. A type of approach to the non-well-posed optimal control problem is given.     

巧用两只弹簧的组合 加深对简谐振动的理解

如果放在光滑桌面上的物体只受一只弹簧的作用，那么物体所作的运动是简揩运动．简谐运动是一种最简单的基本运动，它的动力学特点是物体所受合力满足F=-kx，该力叫回复力．简谐运动的特点是具有周期性，周期T=2π√m/k，其中m是振动物体质量，k是回复力     

单光子态的产生与测量

报道了通过自发参量下转换产生单光子态的实验研究,使用中心波长425 nm的飞秒脉冲泵浦Ⅰ类非共线相位匹配的BBO晶体,在实验上得到单光子计数率为2.978×10-4,并分析了实验中的相关问题.     

Experimental Creation of Entanglement Using Separable States

We experimentally demonstrate that the entanglement can be created on two distant particles using separable states. We show that two working particles can share some entanglement, while one ancilla particle always remains separable from the two working particles during the experimental evolution of the system. Our experiment can be viewed as a benchmark to illustrate the idea that no prior entanglement is necessary to create entanglement.     

Dissociative Chemisorption of an H2（v,j） Molecule on Rigid Ni （100） Surface： Dependence on Surface Topologies and Initial Rovibrational States of the Molecules

The H2(v,j) Ni(100) collision system has been studied to understand the effects of the surface sites and initial rovibrational states of the molecule on molecule-surface interactions, by a quasiclassical molecular dynamic simulation method. Dissociative adsorption of an H2 molecule on the rigid Ni(100) surface is investigated at topologically different three sites of the surface. Interaction between the molecule and Ni surface was described by a London-Eyring-Polani-Sato (LEPS) potential. Dissociative chemisorption probabilities of the H2(v, j) molecule on various sites of the surface are presented as a function of the translation energies between 0.001-1.0eV. The probabilities obtained at each collision site have unique behaviour. At lower collision energies, indirect processes enhance the reactivity, effects of the rotational excitations and impact sites on the reactivity are more pronounced. The results are compared with the available studies. The physical mechanisms underlying the results and quantum effects are discussed.     

Recombination Efficiency in Double-Layer Organic Light-Emitting Devices

We analyse the influence of properties of organic/organic interface (OOI) on the characteristics of recombination efficiency of organic double-layer light-emitting diodes. Based on the disordered hopping theory model, spatial and energetic disorder of hopping states are also discussed for the case of space charge limited currents in hole transmitting layers but injection-limited currents in electron transporting layers. The results show that the recombination efficiency increases firstly and then decreases for different OOI parameters, and there is a maximum value changed with different spatial disorder parameters and energetic disorder scale. Different spatial disorder parameters make carrier mobilities change greatly, and the energetic disorder scale causes various localized state densities. Our calculated results are qualitatively in agreement with the experimental data.     

耦合映像格子中时空混沌的状态反馈控制

利用状态反馈的方法，实现了耦合映像格子中时空混沌的稳定控制.反馈方式可以是没有延迟的，也可以是有延迟的；控制方式可以是连续的，也可以是脉冲的.数值模拟结果证明了状态反馈方法的有效性. 关键词： 耦合映像格子 时空混沌 状态反馈控制